On 30.03.2008, Thierry Herbelot wrote: > Le Sunday 30 March 2008, Victor M. Blood a ecrit : >> > >> > Hello, >> > >> > good news if the machine starts correctly ! >> > >> > the next step is finding the conditions when the machine does not start, >> > and get a verbose log. >> >> http://elcom.ru/~masm/boot-gsvh.log >> >> Problem with 2Gb of memory? WinXP startup and work correct. Without >> hw.physmem="1G" kernel don't start and no any log can be made. > then try other values : 1500Mb, .... to see where it stops > it is your machine, and you are the only one who can try different > combinations. > you say that the kernel does not start if you remove hw.physmem="1G" : maybe > the loader has troubles with the memory map from the BIOS ? hm, this MB has integrated video chip, may be memory size can't be correctly detected, thanks for idea. I set physmem to 1500M, 1700M, 1900M, kernel was started and devices probed. but then try 2G - system reboot after kernel priambula: Overlapping or non-monotonic memory region, ignoring second region Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-CURRENT #0: Fri Mar 28 01:02:20 MSK 2008 root_at_matrix:/usr/obj/usr/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. P === [reboot] I think with hw.physmem="1800M" it will work fine :), thanks for help. -- With all regards, Victor M. Blood. mailto: freebsd_at_masm.elcom.ru FTN: 2:5024/1.95_at_Fidonet.org, ICQ#3567656Received on Sun Mar 30 2008 - 17:56:28 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:29 UTC