Pyun YongHyeon <pyunyh_at_gmail.com> writes: > As bruffer pointed out the device name chosen conflicts with other > driver in tree so I renamed it to ale(4).The URL for the driver is > http://people.freebsd.org/~yongari/ale/if_ale.c > http://people.freebsd.org/~yongari/ale/if_alereg.h > http://people.freebsd.org/~yongari/ale/if_alevar.h > http://people.freebsd.org/~yongari/ale/Makefile > or > http://people.freebsd.org/~yongari/ale/ale.20081030.tar.gz > Sorry for confusion. Tested at EeePC-1000, works fine. BIG thank you, much appreciated. Here is some additional info. -- dmesg -- ale0: <Atheros AR8121/AR8113/AR8114 PCIe Ethernet> port 0xec80-0xecff mem 0xfbfc0000-0xfbffffff irq 17 at device 0.0 on pci4 ale0: Reserved 0x40000 bytes for rid 0x10 type 3 at 0xfbfc0000 ale0: PCI device revision : 0x00b0 ale0: Chip id/revision : 0xb002 ale0: 960 Tx FIFO, 1024 Rx FIFO ale0: MSIX count : 0 ale0: MSI count : 1 ale0: attempting to allocate 1 MSI vectors (1 supported) ale0: using IRQ 256 for MSI ale0: Using 1 MSI messages. ale0: Read request size : 512 bytes. ale0: TLP payload size : 128 bytes. ale0: bpf attached ale0: Ethernet address: 00:22:15:91:e7:98 ale0: [MPSAFE] ale0: [FILTER] ale0: link state changed to DOWN ale0: interrupt moderation is 100 us. ale0: link state changed to UP -- pciconf -- ale0_at_pci0:4:0:0: class=0x020000 card=0x83241043 chip=0x10261969 rev=0xb0 hdr=0x00 vendor = 'Attansic (Now owned by Atheros)' class = network subclass = ethernet -- devinfo -- pci4 ale0 pnpinfo vendor=0x1969 device=0x1026 subvendor=0x1043 subdevice=0x8324 class=0x020000 at slot=0 function=0 Interrupt request lines: 256 I/O ports: 0xec80-0xecff I/O memory addresses: 0xfbfc0000-0xfbffffff miibus0 atphy0 pnpinfo oui=0x1374 model=0x1 rev=0x9 at phyno=0 ----- WBR -- Boris Samorodov (bsam) Research Engineer, http://www.ipt.ru Telephone & Internet SP FreeBSD committer, http://www.FreeBSD.org The Power To ServeReceived on Mon Nov 03 2008 - 16:23:05 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:37 UTC