On Fri, 2008-11-14 at 13:32 -0500, Coleman Kane wrote: > On Thu, 2008-11-06 at 01:38 +0100, Diego Depaoli wrote: > > Hi all, > > I don't know how provide further details, but on my system there is > > something of wrong between new usb2 drivers and hald. > > Top shows hald's cpu load at 100% while with old drivers it's 2-4%. > > I tried rebuilding hald, loading/unloading each usb2_* device but > > nothing changed, so I suspect the problem is located in usb2_core. > > I figured out the problem, and I have a solution. As the other person > mentioned, the device name has changed from "/dev/usb" into "/dev/usb > " (the space is important). However, the hald daemon doesn't use libusb > on FreeBSD. Here's a patch which tells hald to look at the new device, > apply it to the root of your ports collection. > > Additionally, I think it is a bug that hald busy-loops trying (and > failing) to open "/dev/usb". Ideally, I think that hald should put a > sleep in there of some sort, to give up CPU to something else. > Ooops. I made a mistake in that last patch. Use this attached one instead -- Coleman Kane
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:37 UTC