Re: Call for axe(4) testers.

Hi,

Pyun YongHyeon <pyunyh_at_gmail.com> writes:

> Attached file is fix for AX88178 USB Gigabit controller. The patch
> removed old hack to find the correct PHY address of controller and 
> it will affect all axe(4) controllers. If you have axe(4) hardware
> please give it try and let me know how it goes.

The patch doesn't work at i386-current. The adapter is detected but
there is no traffic.
-----
% dmesg | grep axe
axe0: <vendor 0x0b95 product 0x7720, class 255/255, rev 2.00/0.01, addr 2> on uhub4
axe0: AX88772, bufsz 4096, boundary 512
miibus0: <MII bus> on axe0
axe0: WARNING: using obsoleted if_watchdog interface
axe0: WARNING: using obsoleted IFF_NEEDSGIANT flag
axe0: Ethernet address: 00:50:b6:03:bc:ba
% usbdevs    [relevant part]
 port 2 addr 2: high speed, power 250 mA, config 1, product 0x7720(0x7720), vendor 0x0b95(0x0b95), rev 0.01, device axe0
% ifconfig axe0
axe0: flags=108843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
	ether 00:50:b6:03:bc:ba
	inet 192.68.192.68 netmask 0xffffffc0 broadcast 194.62.233.127
	media: Ethernet autoselect (100baseTX <full-duplex>)
	status: active
-----

The adapter is Trendnet TU2-ET100. It works fine without the patch.
Let me know if you need some more info/testing.

Thanks for your work!

WBR
-- 
Boris Samorodov (bsam)
Research Engineer, http://www.ipt.ru Telephone & Internet SP
FreeBSD committer, http://www.FreeBSD.org The Power To Serve