When I plug a gradiente cell phone on my USB I got this: Apr 7 15:33:01 botelhor root: Unknown USB device: vendor 0x0e8d product 0x0002 bus uhub0 Apr 7 15:33:01 botelhor kernel: ugen0.2: <EZZE-E800GF> at usbus0 Apr 7 15:33:01 botelhor kernel: umass0: <EZZE -Storage> on usbus0 Apr 7 15:33:01 botelhor kernel: umass0: SCSI over Bulk-Only; quirks = 0x0000 Apr 7 15:33:02 botelhor kernel: umass0:0:0:-1: Attached to scbus0 Apr 7 15:33:02 botelhor kernel: da0 at umass-sim0 bus 0 target 0 lun 0 Apr 7 15:33:02 botelhor kernel: da0: <GF-500 > Removable Direct Access SCSI-0 device Apr 7 15:33:02 botelhor kernel: da0: 1.000MB/s transfers Apr 7 15:33:02 botelhor kernel: da0: 982MB (2012160 512 byte sectors: 64H 32S/T 982C) Apr 7 15:33:02 botelhor kernel: da1 at umass-sim0 bus 0 target 0 lun 1 Apr 7 15:33:02 botelhor kernel: da1: <GF-500 > Removable Direct Access SCSI-0 device Apr 7 15:33:02 botelhor kernel: da1: 1.000MB/s transfers Apr 7 15:33:02 botelhor kernel: da1: 1MB (3668 512 byte sectors: 64H 32S/T 1C) Apr 7 15:33:02 botelhor kernel: GEOM: da0: partition 1 does not start on a track boundary. Apr 7 15:33:02 botelhor kernel: GEOM: da0: partition 1 does not end on a track boundary. Apr 7 15:33:04 botelhor kernel: umass0: at uhub0, port 2, addr 2 (disconnected) Apr 7 15:33:04 botelhor kernel: (da1:umass-sim0:0:0:1): Synchronize cache failed, status == 0x3f, scsi status == 0x0 Apr 7 15:33:04 botelhor kernel: (da0:umass-sim0:0:0:0): lost device Apr 7 15:33:04 botelhor kernel: (da0:umass-sim0:0:0:0): removing device entry Apr 7 15:33:04 botelhor kernel: (da1:umass-sim0:0:0:1): lost device Apr 7 15:33:04 botelhor kernel: (da1:umass-sim0:0:0:1): removing device entry Apr 7 15:33:04 botelhor kernel: ugen0.2: <EZZE-E800GF> at usbus0 (disconnected) Using 8.0-CURRENT r190550 I've tried on all usb ports, and have the same. Any idea? -- Renato BotelhoReceived on Tue Apr 07 2009 - 16:39:47 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:45 UTC