Re: ahci(4) hang reproduced, this time it was cdrdao scanbus

From: Juergen Lock <nox_at_jelal.kn-bremen.de>
Date: Sat, 15 Aug 2009 16:30:28 +0200
On Sat, Aug 15, 2009 at 02:18:38PM +0200, Joerg Schilling wrote:
> >wanted to burn an audio cd today and ran `cdrdao scanbus' to find out
> >cdrdao's --device arg for the optical drive (turns out its the same
> 
> why do you use cdrdao for writing an audio CD?
> 
Because it writes it in one session from a toc file, getting the pregaps
etc right.
> 
> 
> >numbering as camcontrol devlist reports i.e.
> >        <PIONEER DVD-RW  DVR-216D 1.09>    at scbus3 target 0 lun 0 (cd1,pass3)
> >becomes --device 3,0,0) - after which ahci(4) hung again with the board's
> >disk access led on solid.  This time tho I took a photo:
> >        http://people.freebsd.org/~nox/ahcihang1.jpg 
> 
> This may be a bug in the driver, a driver is not allowed to do retries in case 
> that a command was send via SCSI pass through.
> 
 Well yes its most likely a driver bug, but the hang and retries were
from `regular' disk access after cdrado had returned successfully,
sorry if that was not clear...

> > cdrdao is in ports as sysutils/cdrdao and is mostly used for writing
> >or cloning audio cds or vcds.  (I haven't tried cdrecord's -scanbus
> >command tho I wouldn't be surprised if it behaves the same...  cdrecord
> >is in ports as sysutils/cdrtools and sysutils/cdrtools-devel; you usually
> >want cdrtools-devel.) 
> 
> Cloning CDs is not really implemented in cdrdao,

 Well I meant something like
	cdrdao read-cd --device ... foo.toc
	cdrdao write --device ... foo.toc
(with an optional
	cdrdao read-cddb foo.toc
before the write in case you want cd-text and the drive can write it.)

>  if you really like to 
> clone, use the clone feature from cdrtools:
> 
> readcd -clone f=img.out
> cdreccord -v -raw96r -clone img.out
> 
> but note that there is a quality loss with cloning, I recommend to call this:
> 
> cdda2wav -vall cddb=0 -paranoia -Owav -B
> cdrecord -v -sao -text -useinfo *.wav
> 
> for best quality of a CD-Audio copy.
> 
 Hmm does that handle pregaps etc correctly as well?
> 
> >Oh and btw, the actual burning (after reboot + fsck) then went just
> >fine, its just the scanbus command that ahci(4) apparently doesn't like... 
> 
> If you like to see what causes the hang, call:
> 
> cdrecord -scanbus -V

 Ok I managed to capture output of that by running script(1) onto an
sdcard on an usb flashcard reader, but first the corresponding output
of camcontrol devlist with the flashcard reader plugged in:

<Seagate FreeAgent Pro 3.AFK>      at scbus0 target 0 lun 0 (ada0,pass0)
<ATAPI BD  B  DH4B1S 7P5B>         at scbus1 target 0 lun 0 (cd0,pass1)
<Hitachi HDT721010SLA360 ST6OA31B>  at scbus2 target 0 lun 0 (ada1,pass2)
<PIONEER DVD-RW  DVR-216D 1.09>    at scbus3 target 0 lun 0 (cd1,pass3)
<Hitachi HDT721010SLA360 ST6OA31B>  at scbus4 target 0 lun 0 (ada2,pass4)
<HP Officejet Pro L7 1.00>         at scbus9 target 0 lun 0 (pass5,da0)
<Generic STORAGE DEVICE 9339>      at scbus10 target 0 lun 0 (pass6,da1)
<Generic STORAGE DEVICE 9339>      at scbus10 target 0 lun 1 (pass7,da2)
<Generic STORAGE DEVICE 9339>      at scbus10 target 0 lun 2 (pass8,da3)
<Generic STORAGE DEVICE 9339>      at scbus10 target 0 lun 3 (pass9,da4)

# cdrecord -scanbus -V
Cdrecord-ProDVD-ProBD-Clone 2.01.01a62 (amd64-unknown-freebsd8.0) Copyright (C) 1995-2009 Jörg Schilling
Using libscg version 'schily-0.9'.
scsibus0:

Executing 'test unit ready' command on Bus 0 Target 0, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Input/output error. test unit ready: scsi sendcmd: retryable error
CDB:  00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0xFFFFFFFF [], Segment 0
Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.002s timeout 40s

Executing 'test unit ready' command on Bus 0 Target 0, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Input/output error. test unit ready: scsi sendcmd: retryable error
CDB:  00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0xFFFFFFFF [], Segment 0
Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.003s timeout 40s

Executing 'inquiry' command on Bus 0 Target 0, Lun 0 timeout 40s
CDB:  12 00 00 00 24 00
cdrecord: Input/output error. inquiry: scsi sendcmd: retryable error
CDB:  12 00 00 00 24 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0xFFFFFFFF [], Segment 0
Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.002s timeout 40s
	0,0,0	  0) error: 1 scb.chk: 1 sense_count: 32 sense.code: 0x0
'' '' '' NON CCS Disk

Executing 'test unit ready' command on Bus 0 Target 1, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	0,1,0	  1) *

Executing 'test unit ready' command on Bus 0 Target 2, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	0,2,0	  2) *

Executing 'test unit ready' command on Bus 0 Target 3, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	0,3,0	  3) *

Executing 'test unit ready' command on Bus 0 Target 4, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	0,4,0	  4) *

Executing 'test unit ready' command on Bus 0 Target 5, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	0,5,0	  5) *

Executing 'test unit ready' command on Bus 0 Target 6, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	0,6,0	  6) *

Executing 'test unit ready' command on Bus 0 Target 7, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	0,7,0	  7) *

Executing 'test unit ready' command on Bus 0 Target 8, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 0 Target 9, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 0 Target 10, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 0 Target 11, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 0 Target 12, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 0 Target 13, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 0 Target 14, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 0 Target 15, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
scsibus1:

Executing 'test unit ready' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Input/output error. test unit ready: scsi sendcmd: retryable error
CDB:  00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0xFFFFFFFF [], Segment 0
Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.001s timeout 40s

Executing 'test unit ready' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Input/output error. test unit ready: scsi sendcmd: retryable error
CDB:  00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0xFFFFFFFF [], Segment 0
Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.001s timeout 40s

Executing 'inquiry' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB:  12 00 00 00 24 00
cmd finished after 0.000s timeout 40s
Inquiry Data   : 05 80 00 32 5B 00 00 00 41 54 41 50 49 20 20 20 42 44 20 20 42 20 20 44 48 34 42 31 53 20 20 20 37 50 35 42

Executing 'inquiry' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB:  12 00 00 00 60 00
cmd finished after 0.000s timeout 40s
Inquiry Data   : 05 80 00 32 5B 00 00 00 41 54 41 50 49 20 20 20 42 44 20 20 42 20 20 44 48 34 42 31 53 20 20 20 37 50 35 42 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 52 5F 5F 5F 00 00 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
	1,0,0	100) Inquiry Data   : ...2[...ATAPI   BD  B  DH4B1S   7P5B                R___..                ......................

Executing 'test unit ready' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Input/output error. test unit ready: scsi sendcmd: retryable error
CDB:  00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0xFFFFFFFF [], Segment 0
Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.001s timeout 40s

Executing 'mode sense g1' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB:  5A 00 3F 00 00 00 00 00 08 00
cmd finished after 0.001s timeout 40s
Mode Sense Data 00 A6 70 00 00 00 00 00

Executing 'test unit ready' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Input/output error. test unit ready: scsi sendcmd: retryable error
CDB:  00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0xFFFFFFFF [], Segment 0
Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.001s timeout 40s

Executing 'mode sense g1' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB:  5A 00 2A 00 00 00 00 00 02 00
cmd finished after 0.001s timeout 40s
Mode Sense Data 00 36
Mode Sense Data (converted) 33

Executing 'test unit ready' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Input/output error. test unit ready: scsi sendcmd: retryable error
CDB:  00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0xFFFFFFFF [], Segment 0
Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.001s timeout 40s

Executing 'mode sense g1' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB:  5A 00 2A 00 00 00 00 00 38 00
cmd finished after 0.001s timeout 40s
Mode Sense Data 00 36 70 00 00 00 00 00 2A 2E 1F 17 F5 67 29 20 16 0D 00 02 40 00 16 0D 00 00 16 0D 16 0D 00 01 00 00 00 00 16 0D 00 04 00 00 1B 90 00 00 16 0D 00 00 10 8A 00 00 0B 06
Mode Sense Data (converted) 33 70 00 00 2A 2E 1F 17 F5 67 29 20 16 0D 00 02 40 00 16 0D 00 00 16 0D 16 0D 00 01 00 00 00 00 16 0D 00 04 00 00 1B 90 00 00 16 0D 00 00 10 8A 00 00 0B 06
Mode Sense Data 33 70 00 00 2A 2E 1F 17 F5 67 29 20 16 0D 00 02 40 00 16 0D 00 00 16 0D 16 0D 00 01 00 00 00 00 16 0D 00 04 00 00 1B 90 00 00 16 0D 00 00 10 8A 00 00 0B 06
Mode Page  Data 2A 2E 1F 17 F5 67 29 20 16 0D 00 02 40 00 16 0D 00 00 16 0D 16 0D 00 01 00 00 00 00 16 0D 00 04 00 00 1B 90 00 00 16 0D 00 00 10 8A 00 00 0B 06

Executing 'test unit ready' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Input/output error. test unit ready: scsi sendcmd: retryable error
CDB:  00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0xFFFFFFFF [], Segment 0
Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.001s timeout 40s

Executing 'mode sense g1' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB:  5A 00 2A 00 00 00 00 00 38 00
cmd finished after 0.001s timeout 40s
Mode Sense Data 00 36 70 00 00 00 00 00 2A 2E 1F 17 F5 67 29 20 16 0D 00 02 40 00 16 0D 00 00 16 0D 16 0D 00 01 00 00 00 00 16 0D 00 04 00 00 1B 90 00 00 16 0D 00 00 10 8A 00 00 0B 06
Mode Sense Data (converted) 33 70 00 00 2A 2E 1F 17 F5 67 29 20 16 0D 00 02 40 00 16 0D 00 00 16 0D 16 0D 00 01 00 00 00 00 16 0D 00 04 00 00 1B 90 00 00 16 0D 00 00 10 8A 00 00 0B 06
Mode Sense Data 33 70 00 00 2A 2E 1F 17 F5 67 29 20 16 0D 00 02 40 00 16 0D 00 00 16 0D 16 0D 00 01 00 00 00 00 16 0D 00 04 00 00 1B 90 00 00 16 0D 00 00 10 8A 00 00 0B 06

Executing 'test unit ready' command on Bus 1 Target 0, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Input/output error. test unit ready: scsi sendcmd: retryable error
CDB:  00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0xFFFFFFFF [], Segment 0
Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.001s timeout 40s
'ATAPI   ' 'BD  B  DH4B1S   ' '7P5B' Removable CD-ROM

Executing 'test unit ready' command on Bus 1 Target 1, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	1,1,0	101) *

Executing 'test unit ready' command on Bus 1 Target 2, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	1,2,0	102) *

Executing 'test unit ready' command on Bus 1 Target 3, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	1,3,0	103) *

Executing 'test unit ready' command on Bus 1 Target 4, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	1,4,0	104) *

Executing 'test unit ready' command on Bus 1 Target 5, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	1,5,0	105) *

Executing 'test unit ready' command on Bus 1 Target 6, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	1,6,0	106) *

Executing 'test unit ready' command on Bus 1 Target 7, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	1,7,0	107) *

Executing 'test unit ready' command on Bus 1 Target 8, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 1 Target 9, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 1 Target 10, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 1 Target 11, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 1 Target 12, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 1 Target 13, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 1 Target 14, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 1 Target 15, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
scsibus2:

Executing 'test unit ready' command on Bus 2 Target 0, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Input/output error. test unit ready: scsi sendcmd: retryable error
CDB:  00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0xFFFFFFFF [], Segment 0
Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.001s timeout 40s

Executing 'test unit ready' command on Bus 2 Target 0, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Input/output error. test unit ready: scsi sendcmd: cmd timeout after 40.007 (40) s
CDB:  00 00 00 00 00 00
cmd finished after 40.007s timeout 40s
	2,0,0	200) '' '' '' NON CCS Disk

Executing 'test unit ready' command on Bus 2 Target 1, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	2,1,0	201) *

Executing 'test unit ready' command on Bus 2 Target 2, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	2,2,0	202) *

Executing 'test unit ready' command on Bus 2 Target 3, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	2,3,0	203) *

Executing 'test unit ready' command on Bus 2 Target 4, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	2,4,0	204) *

Executing 'test unit ready' command on Bus 2 Target 5, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	2,5,0	205) *

Executing 'test unit ready' command on Bus 2 Target 6, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	2,6,0	206) *

Executing 'test unit ready' command on Bus 2 Target 7, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	2,7,0	207) *

Executing 'test unit ready' command on Bus 2 Target 8, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 2 Target 9, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 2 Target 10, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 2 Target 11, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 2 Target 12, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 2 Target 13, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 2 Target 14, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 2 Target 15, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
scsibus3:

Executing 'test unit ready' command on Bus 3 Target 0, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Input/output error. test unit ready: scsi sendcmd: retryable error
CDB:  00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0xFFFFFFFF [], Segment 0
Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.001s timeout 40s

Executing 'test unit ready' command on Bus 3 Target 0, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Input/output error. test unit ready: scsi sendcmd: retryable error
CDB:  00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0xFFFFFFFF [], Segment 0
Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.030s timeout 40s

Executing 'inquiry' command on Bus 3 Target 0, Lun 0 timeout 40s
CDB:  12 00 00 00 24 00
cmd finished after 0.000s timeout 40s
Inquiry Data   : 05 80 00 32 5B 00 00 00 50 49 4F 4E 45 45 52 20 44 56 44 2D 52 57 20 20 44 56 52 2D 32 31 36 44 31 2E 30 39

Executing 'inquiry' command on Bus 3 Target 0, Lun 0 timeout 40s
CDB:  12 00 00 00 60 00
cmd finished after 0.030s timeout 40s
Inquiry Data   : 05 80 00 32 5B 00 00 00 50 49 4F 4E 45 45 52 20 44 56 44 2D 52 57 20 20 44 56 52 2D 32 31 36 44 31 2E 30 39 20 30 38 2F 30 39 2F 32 39 20 20 50 49 4F 4E 45 45 52 20 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
	3,0,0	300) Inquiry Data   : ...2[...PIONEER DVD-RW  DVR-216D1.09 08/09/29  PIONEER  ........................................

Executing 'test unit ready' command on Bus 3 Target 0, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Input/output error. test unit ready: scsi sendcmd: retryable error
CDB:  00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0xFFFFFFFF [], Segment 0
Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.001s timeout 40s

Executing 'mode sense g1' command on Bus 3 Target 0, Lun 0 timeout 40s
CDB:  5A 00 3F 00 00 00 00 00 08 00
cmd finished after 0.029s timeout 40s
Mode Sense Data 00 C4 70 00 00 00 00 00

Executing 'test unit ready' command on Bus 3 Target 0, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Input/output error. test unit ready: scsi sendcmd: retryable error
CDB:  00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0xFFFFFFFF [], Segment 0
Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.001s timeout 40s

Executing 'mode sense g1' command on Bus 3 Target 0, Lun 0 timeout 40s
CDB:  5A 00 2A 00 00 00 00 00 02 00
cmd finished after 0.029s timeout 40s
Mode Sense Data 00 52
Mode Sense Data (converted) 4F

Executing 'test unit ready' command on Bus 3 Target 0, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Input/output error. test unit ready: scsi sendcmd: retryable error
CDB:  00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0xFFFFFFFF [], Segment 0
Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.001s timeout 40s

Executing 'mode sense g1' command on Bus 3 Target 0, Lun 0 timeout 40s
CDB:  5A 00 2A 00 00 00 00 00 54 00
cmd finished after 0.029s timeout 40s
Mode Sense Data 00 52 70 00 00 00 00 00 2A 4A 3F 17 F1 73 29 23 1B 90 01 00 07 D0 1B 90 00 00 1B 90 16 0C 00 01 00 00 00 00 16 0C 00 08 00 00 21 13 00 00 1B 90 00 00 16 0C 00 00 10 89 00 00 0D C8 00 00 0B 06 00 00 06 E4 00 00 02 C1 00 00 00 00 00 00 00 00 00 00 00 00
Mode Sense Data (converted) 4F 70 00 00 2A 4A 3F 17 F1 73 29 23 1B 90 01 00 07 D0 1B 90 00 00 1B 90 16 0C 00 01 00 00 00 00 16 0C 00 08 00 00 21 13 00 00 1B 90 00 00 16 0C 00 00 10 89 00 00 0D C8 00 00 0B 06 00 00 06 E4 00 00 02 C1 00 00 00 00 00 00 00 00 00 00 00 00
Mode Sense Data 4F 70 00 00 2A 4A 3F 17 F1 73 29 23 1B 90 01 00 07 D0 1B 90 00 00 1B 90 16 0C 00 01 00 00 00 00 16 0C 00 08 00 00 21 13 00 00 1B 90 00 00 16 0C 00 00 10 89 00 00 0D C8 00 00 0B 06 00 00 06 E4 00 00 02 C1 00 00 00 00 00 00 00 00 00 00 00 00
Mode Page  Data 2A 4A 3F 17 F1 73 29 23 1B 90 01 00 07 D0 1B 90 00 00 1B 90 16 0C 00 01 00 00 00 00 16 0C 00 08 00 00 21 13 00 00 1B 90 00 00 16 0C 00 00 10 89 00 00 0D C8 00 00 0B 06 00 00 06 E4 00 00 02 C1 00 00 00 00 00 00 00 00 00 00 00 00

Executing 'test unit ready' command on Bus 3 Target 0, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Input/output error. test unit ready: scsi sendcmd: retryable error
CDB:  00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0xFFFFFFFF [], Segment 0
Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.001s timeout 40s

Executing 'mode sense g1' command on Bus 3 Target 0, Lun 0 timeout 40s
CDB:  5A 00 2A 00 00 00 00 00 54 00
cmd finished after 0.029s timeout 40s
Mode Sense Data 00 52 70 00 00 00 00 00 2A 4A 3F 17 F1 73 29 23 1B 90 01 00 07 D0 1B 90 00 00 1B 90 16 0C 00 01 00 00 00 00 16 0C 00 08 00 00 21 13 00 00 1B 90 00 00 16 0C 00 00 10 89 00 00 0D C8 00 00 0B 06 00 00 06 E4 00 00 02 C1 00 00 00 00 00 00 00 00 00 00 00 00
Mode Sense Data (converted) 4F 70 00 00 2A 4A 3F 17 F1 73 29 23 1B 90 01 00 07 D0 1B 90 00 00 1B 90 16 0C 00 01 00 00 00 00 16 0C 00 08 00 00 21 13 00 00 1B 90 00 00 16 0C 00 00 10 89 00 00 0D C8 00 00 0B 06 00 00 06 E4 00 00 02 C1 00 00 00 00 00 00 00 00 00 00 00 00
Mode Sense Data 4F 70 00 00 2A 4A 3F 17 F1 73 29 23 1B 90 01 00 07 D0 1B 90 00 00 1B 90 16 0C 00 01 00 00 00 00 16 0C 00 08 00 00 21 13 00 00 1B 90 00 00 16 0C 00 00 10 89 00 00 0D C8 00 00 0B 06 00 00 06 E4 00 00 02 C1 00 00 00 00 00 00 00 00 00 00 00 00

Executing 'test unit ready' command on Bus 3 Target 0, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Input/output error. test unit ready: scsi sendcmd: retryable error
CDB:  00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0xFFFFFFFF [], Segment 0
Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.001s timeout 40s
'PIONEER ' 'DVD-RW  DVR-216D' '1.09' Removable CD-ROM

Executing 'test unit ready' command on Bus 3 Target 1, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	3,1,0	301) *

Executing 'test unit ready' command on Bus 3 Target 2, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	3,2,0	302) *

Executing 'test unit ready' command on Bus 3 Target 3, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	3,3,0	303) *

Executing 'test unit ready' command on Bus 3 Target 4, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	3,4,0	304) *

Executing 'test unit ready' command on Bus 3 Target 5, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	3,5,0	305) *

Executing 'test unit ready' command on Bus 3 Target 6, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	3,6,0	306) *

Executing 'test unit ready' command on Bus 3 Target 7, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	3,7,0	307) *

Executing 'test unit ready' command on Bus 3 Target 8, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 3 Target 9, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 3 Target 10, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 3 Target 11, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 3 Target 12, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 3 Target 13, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 3 Target 14, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 3 Target 15, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
scsibus4:

Executing 'test unit ready' command on Bus 4 Target 0, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Input/output error. test unit ready: scsi sendcmd: retryable error
CDB:  00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0xFFFFFFFF [], Segment 0
Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.001s timeout 40s

Executing 'test unit ready' command on Bus 4 Target 0, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
load: 0.24  cmd: cdrecord 64 [cbwait] 58.71r 0.00u 0.00s 0% 1692k
cdrecord: Input/output error. test unit ready: scsi sendcmd: cmd timeout after 40.007 (40) s
CDB:  00 00 00 00 00 00
cmd finished after 40.007s timeout 40s
	4,0,0	400) '' '' '' NON CCS Disk

Executing 'test unit ready' command on Bus 4 Target 1, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	4,1,0	401) *

Executing 'test unit ready' command on Bus 4 Target 2, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	4,2,0	402) *

Executing 'test unit ready' command on Bus 4 Target 3, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	4,3,0	403) *

Executing 'test unit ready' command on Bus 4 Target 4, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	4,4,0	404) *

Executing 'test unit ready' command on Bus 4 Target 5, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	4,5,0	405) *

Executing 'test unit ready' command on Bus 4 Target 6, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	4,6,0	406) *

Executing 'test unit ready' command on Bus 4 Target 7, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	4,7,0	407) *

Executing 'test unit ready' command on Bus 4 Target 8, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 4 Target 9, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 4 Target 10, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 4 Target 11, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 4 Target 12, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 4 Target 13, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 4 Target 14, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 4 Target 15, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
scsibus9:

Executing 'test unit ready' command on Bus 9 Target 0, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Input/output error. test unit ready: scsi sendcmd: retryable error
CDB:  00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0C 00 00 00 00 3A 00 00 00 00 00 66 69 63 65 6A 65 74 20 50 72 6F 20 4C 37
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.001s timeout 40s

Executing 'test unit ready' command on Bus 9 Target 0, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Input/output error. test unit ready: scsi sendcmd: retryable error
CDB:  00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0C 00 00 00 00 3A 00 00 00 00 00 66 69 63 65 6A 65 74 20 50 72 6F 20 4C 37
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.000s timeout 40s

Executing 'inquiry' command on Bus 9 Target 0, Lun 0 timeout 40s
CDB:  12 00 00 00 24 00
cmd finished after 0.000s timeout 40s
Inquiry Data   : 00 80 02 02 5B 00 00 00 48 50 20 20 20 20 20 20 4F 66 66 69 63 65 6A 65 74 20 50 72 6F 20 4C 37 31 2E 30 30

Executing 'inquiry' command on Bus 9 Target 0, Lun 0 timeout 40s
CDB:  12 00 00 00 60 00
cmd finished after 0.000s timeout 40s
Inquiry Data   : 00 80 02 02 5B 00 00 00 48 50 20 20 20 20 20 20 4F 66 66 69 63 65 6A 65 74 20 50 72 6F 20 4C 37 31 2E 30 30 55 53 42 20 4D 61 73 73 20 53 74 6F 72 61 67 65 20 20 20 20 00 00 03 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
	9,0,0	900) Inquiry Data   : ....[...HP      Officejet Pro L71.00USB Mass Storage    ... ....................................
'HP      ' 'Officejet Pro L7' '1.00' Removable Disk

Executing 'test unit ready' command on Bus 9 Target 1, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	9,1,0	901) *

Executing 'test unit ready' command on Bus 9 Target 2, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	9,2,0	902) *

Executing 'test unit ready' command on Bus 9 Target 3, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	9,3,0	903) *

Executing 'test unit ready' command on Bus 9 Target 4, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	9,4,0	904) *

Executing 'test unit ready' command on Bus 9 Target 5, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	9,5,0	905) *

Executing 'test unit ready' command on Bus 9 Target 6, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	9,6,0	906) *

Executing 'test unit ready' command on Bus 9 Target 7, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	9,7,0	907) *

Executing 'test unit ready' command on Bus 9 Target 8, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 9 Target 9, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 9 Target 10, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 9 Target 11, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 9 Target 12, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 9 Target 13, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 9 Target 14, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 9 Target 15, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
scsibus10:

Executing 'test unit ready' command on Bus 10 Target 0, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Input/output error. test unit ready: scsi sendcmd: retryable error
CDB:  00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.001s timeout 40s

Executing 'test unit ready' command on Bus 10 Target 0, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Input/output error. test unit ready: scsi sendcmd: retryable error
CDB:  00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.001s timeout 40s

Executing 'inquiry' command on Bus 10 Target 0, Lun 0 timeout 40s
CDB:  12 00 00 00 24 00
cmd finished after 0.000s timeout 40s
Inquiry Data   : 00 80 00 00 29 00 00 00 47 65 6E 65 72 69 63 20 53 54 4F 52 41 47 45 20 44 45 56 49 43 45 20 20 39 33 33 39

Executing 'inquiry' command on Bus 10 Target 0, Lun 0 timeout 40s
CDB:  12 00 00 00 2E 00
cmd finished after 0.000s timeout 40s
Inquiry Data   : 00 80 00 00 29 00 00 00 47 65 6E 65 72 69 63 20 53 54 4F 52 41 47 45 20 44 45 56 49 43 45 20 20 39 33 33 39 05 E3 07 0E 47 45 4E 45 08 03
	10,0,0	1000) Inquiry Data   : ....)...Generic STORAGE DEVICE  9339....GENE..
'Generic ' 'STORAGE DEVICE  ' '9339' Removable Disk

Executing 'test unit ready' command on Bus 10 Target 1, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	10,1,0	1001) *

Executing 'test unit ready' command on Bus 10 Target 2, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	10,2,0	1002) *

Executing 'test unit ready' command on Bus 10 Target 3, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	10,3,0	1003) *

Executing 'test unit ready' command on Bus 10 Target 4, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	10,4,0	1004) *

Executing 'test unit ready' command on Bus 10 Target 5, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	10,5,0	1005) *

Executing 'test unit ready' command on Bus 10 Target 6, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	10,6,0	1006) *

Executing 'test unit ready' command on Bus 10 Target 7, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
	10,7,0	1007) *

Executing 'test unit ready' command on Bus 10 Target 8, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 10 Target 9, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 10 Target 10, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 10 Target 11, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 10 Target 12, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 10 Target 13, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 10 Target 14, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Executing 'test unit ready' command on Bus 10 Target 15, Lun 0 timeout 40s
CDB:  00 00 00 00 00 00
cdrecord: Error 0. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
# ^D
Received on Sat Aug 15 2009 - 12:33:13 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:53 UTC