Re: no em0 with r195477

From: Jack Vogel <jfvogel_at_gmail.com>
Date: Thu, 9 Jul 2009 11:35:03 -0700
I am looking into this, thanks for the report.

Jack


On Thu, Jul 9, 2009 at 10:52 AM, Chris Ruiz <yr.retarded_at_gmail.com> wrote:

> On Thu, Jul 9, 2009 at 6:39 AM, Stanislav Sedov<stas_at_freebsd.org> wrote:
> > On Wed, 8 Jul 2009 22:58:27 -0500
> > Chris Ruiz <yr.retarded_at_gmail.com> mentioned:
> >
> >> i just upgraded from r194562 to r195477 in order to test BETA1 and my
> >> e1000 adapter no longer attaching to the driver.
> >>
> >> pciconf -lv output
> >>
> >> em0_at_pci0:0:25:0:        class=0x020000 card=0x00018086 chip=0x10bd8086
> >> rev=0x02 hdr=0x00
> >>     vendor     = 'Intel Corporation'
> >>     device     = 'Intel 82566DM Gigabit Ethernet Adapter (82566DM)'
> >>     class      = network
> >>     subclass   = ethernet
> >>
> >> here's a quick list of relevant commits since my last kernel build:
> >> r195409, r195168, r195049, r194979, r194925, r194911, r194865.
> >>
> >
> > Hi, Chris!
> >
> > Can you provide the verbose boot log?
>
> Turns out it's caused by the driver thinking the EEPROM checksum is
> invalid.  Here's a verbose dmesg:
>
> Copyright (c) 1992-2009 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>        The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 8.0-BETA1 #0 r195483: Wed Jul  8 21:51:57 CDT 2009
>    root_at_attack.young-alumni.com:/usr/obj/usr/src/sys/FAILWHALE
> WARNING: WITNESS option enabled, expect reduced performance.
> Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80dce000.
> Preloaded elf obj module "/boot/kernel/zfs.ko" at 0xffffffff80dce2b0.
> Preloaded elf obj module "/boot/kernel/opensolaris.ko" at
> 0xffffffff80dce958.
> Preloaded /boot/zfs/zpool.cache "/boot/zfs/zpool.cache" at
> 0xffffffff80dcef88.
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Calibrating TSC clock ... TSC clock: 3001458636 Hz
> CPU: Intel(R) Core(TM)2 Duo CPU     E6850  _at_ 3.00GHz (3001.46-MHz K8-class
> CPU)
>  Origin = "GenuineIntel"  Id = 0x6fb  Stepping = 11
>
>  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>  Features2=0xe3f5<SSE3,DTES64,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
>  AMD Features=0x20100800<SYSCALL,NX,LM>
>  AMD Features2=0x1<LAHF>
>  TSC: P-state invariant
> real memory  = 8589934592 (8192 MB)
> Physical memory chunk(s):
> 0x0000000000001000 - 0x0000000000040fff, 262144 bytes (64 pages)
> 0x0000000000051000 - 0x0000000000099fff, 299008 bytes (73 pages)
> 0x0000000000e01000 - 0x00000000cdbcbfff, 3437015040 bytes (839115 pages)
> 0x00000000cdc9a000 - 0x00000000ceec4fff, 19050496 bytes (4651 pages)
> 0x00000000ceec7000 - 0x00000000cef79fff, 733184 bytes (179 pages)
> 0x00000000cefe5000 - 0x00000000cefe5fff, 4096 bytes (1 pages)
> 0x00000000ceff2000 - 0x00000000ceff2fff, 4096 bytes (1 pages)
> 0x00000000cefff000 - 0x00000000ceffffff, 4096 bytes (1 pages)
> 0x0000000100000000 - 0x000000021cbf3fff, 4777263104 bytes (1166324 pages)
> avail memory = 8192516096 (7812 MB)
> ACPI APIC Table: <INTEL  DQ3510J >
> INTR: Adding local APIC 1 as a target
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> FreeBSD/SMP: 1 package(s) x 2 core(s)
>  cpu0 (BSP): APIC ID:  0
>  cpu1 (AP): APIC ID:  1
> APIC: CPU 0 has ACPI ID 1
> APIC: CPU 1 has ACPI ID 2
> ULE: setup cpu 0
> ULE: setup cpu 1
> This module (opensolaris) contains code covered by the
> Common Development and Distribution License (CDDL)
> see http://opensolaris.org/os/licensing/opensolaris_license/
> ACPI: RSDP 0xfe020 00014 (v0 INTEL )
> ACPI: RSDT 0xceffd038 00070 (v1 INTEL  DQ3510J  000003BA      01000013)
> ACPI: FACP 0xceffc000 00074 (v1 INTEL  DQ3510J  000003BA MSFT 01000013)
> ACPI: DSDT 0xceff8000 03D6A (v1 INTEL  DQ3510J  000003BA MSFT 01000013)
> ACPI: FACS 0xcef87000 00040
> ACPI: APIC 0xceff7000 00078 (v1 INTEL  DQ3510J  000003BA MSFT 01000013)
> ACPI: WDDT 0xceff6000 00040 (v1 INTEL  DQ3510J  000003BA MSFT 01000013)
> ACPI: MCFG 0xceff5000 0003C (v1 INTEL  DQ3510J  000003BA MSFT 01000013)
> ACPI: ASF! 0xceff4000 000A6 (v32 INTEL  DQ3510J  000003BA MSFT 01000013)
> ACPI: HPET 0xceff3000 00038 (v1 INTEL  DQ3510J  000003BA MSFT 01000013)
> ACPI: DMAR 0xceff1000 000F8 (v1 INTEL  DQ3510J  000003BA MSFT 01000013)
> ACPI: ASPT 0xceff0000 0002C (v3 INTEL  DQ3510J  000003BA MSFT 01000013)
> ACPI: WDTT 0xcefef000 002CC (v1 INTEL  DQ3510J  000003BA MSFT 01000013)
> ACPI: SSDT 0xcefee000 00204 (v1 INTEL     CpuPm 000003BA MSFT 01000013)
> ACPI: SSDT 0xcefed000 001F9 (v1 INTEL   Cpu0Ist 000003BA MSFT 01000013)
> ACPI: SSDT 0xcefec000 001F9 (v1 INTEL   Cpu1Ist 000003BA MSFT 01000013)
> ACPI: SSDT 0xcefeb000 001F9 (v1 INTEL   Cpu2Ist 000003BA MSFT 01000013)
> ACPI: SSDT 0xcefea000 001F9 (v1 INTEL   Cpu3Ist 000003BA MSFT 01000013)
> ACPI: SSDT 0xcefe9000 000DD (v1 INTEL   Cpu0Cst 000003BA MSFT 01000013)
> ACPI: SSDT 0xcefe8000 000DD (v1 INTEL   Cpu1Cst 000003BA MSFT 01000013)
> ACPI: SSDT 0xcefe7000 000DD (v1 INTEL   Cpu2Cst 000003BA MSFT 01000013)
> ACPI: SSDT 0xcefe6000 000DD (v1 INTEL   Cpu3Cst 000003BA MSFT 01000013)
> ACPI: TCPA 0xcef7b000 00032 (v2 INTEL  TIANO    00000002 MSFT 01000013)
> MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
> ioapic0: Changing APIC ID to 2
> ioapic0: Routing external 8259A's -> intpin 0
> MADT: Interrupt override: source 0, irq 2
> ioapic0: Routing IRQ 0 -> intpin 2
> MADT: Interrupt override: source 9, irq 9
> ioapic0: intpin 9 trigger: level
> lapic0: Routing NMI -> LINT1
> lapic0: LINT1 trigger: edge
> lapic0: LINT1 polarity: high
> lapic1: Routing NMI -> LINT1
> lapic1: LINT1 trigger: edge
> lapic1: LINT1 polarity: high
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> cpu0 BSP:
>     ID: 0x00000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>  timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
> wlan: <802.11 Link Layer>
> ichwd module loaded
> io: <I/O>
> kbd0 at kbdmux0
> mem: <memory>
> nfslock: pseudo-device
> null: <null device, zero device>
> random: <entropy source, Software, Yarrow>
> acpi0: <INTEL DQ3510J> on motherboard
> ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
> acpi0: [MPSAFE]
> acpi0: [ITHREAD]
> acpi0: Power Button (fixed)
> acpi0: wakeup code va 0xffffff8000011000 pa 0x4000
> acpi_bus_number: root bus has no _BBN, assuming 0
> AcpiOsDerivePciId: \\_SB_.PCI0.TMEM -> bus 0 dev 0 func 0
> acpi_bus_number: root bus has no _BBN, assuming 0
> AcpiOsDerivePciId: \\_SB_.PCI0.PAMX -> bus 0 dev 0 func 0
> acpi_bus_number: root bus has no _BBN, assuming 0
> AcpiOsDerivePciId: \\_SB_.PCI0.LPC_.PRR0 -> bus 0 dev 31 func 0
> acpi_bus_number: root bus has no _BBN, assuming 0
> AcpiOsDerivePciId: \\_SB_.PCI0.LPC_.PRR1 -> bus 0 dev 31 func 0
> acpi_bus_number: root bus has no _BBN, assuming 0
> AcpiOsDerivePciId: \\_SB_.PCI0.LPC_.IELK.ELR0 -> bus 0 dev 0 func 0
> ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
> pci_link0:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   11   N     0  3 4 5 7 9 10 11 12
>  Validation          0   11   N     0  3 4 5 7 9 10 11 12
>  After Disable       0  255   N     0  3 4 5 7 9 10 11 12
> pci_link1:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   10   N     0  3 4 5 7 9 10 11 12
>  Validation          0   10   N     0  3 4 5 7 9 10 11 12
>  After Disable       0  255   N     0  3 4 5 7 9 10 11 12
> pci_link2:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0    9   N     0  3 4 5 7 9 10 11 12
>  Validation          0    9   N     0  3 4 5 7 9 10 11 12
>  After Disable       0  255   N     0  3 4 5 7 9 10 11 12
> pci_link3:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   11   N     0  3 4 5 7 9 10 11 12
>  Validation          0   11   N     0  3 4 5 7 9 10 11 12
>  After Disable       0  255   N     0  3 4 5 7 9 10 11 12
> pci_link4:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   11   N     0  3 4 5 7 9 10 11 12
>  Validation          0   11   N     0  3 4 5 7 9 10 11 12
>  After Disable       0  255   N     0  3 4 5 7 9 10 11 12
> pci_link5:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0    9   N     0  3 4 5 7 9 10 11 12
>  Validation          0    9   N     0  3 4 5 7 9 10 11 12
>  After Disable       0  255   N     0  3 4 5 7 9 10 11 12
> pci_link6:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   10   N     0  3 4 5 7 9 10 11 12
>  Validation          0   10   N     0  3 4 5 7 9 10 11 12
>  After Disable       0  255   N     0  3 4 5 7 9 10 11 12
> pci_link7:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   11   N     0  3 4 5 7 9 10 11 12
>  Validation          0   11   N     0  3 4 5 7 9 10 11 12
>  After Disable       0  255   N     0  3 4 5 7 9 10 11 12
> acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
> acpi0
> acpi_hpet0: vend: 0x8086 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route
> 64-bit
> Timecounter "HPET" frequency 14318180 Hz quality 900
> acpi_button0: <Sleep Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pci0: domain=0, physical bus=0
> found-> vendor=0x8086, dev=0x29b0, revid=0x02
>        domain=0, bus=0, slot=0, func=0
>        class=06-00-00, hdrtype=0x00, mfdev=0
>        cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x8086, dev=0x29b2, revid=0x02
>        domain=0, bus=0, slot=2, func=0
>        class=03-00-00, hdrtype=0x00, mfdev=1
>        cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=11
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 1 message
>        map[10]: type Memory, range 32, base 0xe0380000, size 19, enabled
>        map[14]: type I/O Port, range 32, base 0x2458, size  3, enabled
>        map[18]: type Prefetchable Memory, range 32, base 0xd0000000, size
> 28, enabled
>        map[1c]: type Memory, range 32, base 0xe0200000, size 20, enabled
> pcib0: matched entry for 0.2.INTA
> pcib0: slot 2 INTA hardwired to IRQ 16
> found-> vendor=0x8086, dev=0x29b3, revid=0x02
>        domain=0, bus=0, slot=2, func=1
>        class=03-80-00, hdrtype=0x00, mfdev=1
>        cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        powerspec 2  supports D0 D3  current D0
>        map[10]: type Memory, range 32, base 0xe0300000, size 19, enabled
> found-> vendor=0x8086, dev=0x29b4, revid=0x02
>        domain=0, bus=0, slot=3, func=0
>        class=07-80-00, hdrtype=0x00, mfdev=1
>        cmdreg=0x0006, statreg=0x0018, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=11
>        powerspec 3  supports D0 D3  current D0
>        MSI supports 1 message, 64 bit
>        map[10]: type Memory, range 64, base 0xe0427100, size  4, enabled
> pcib0: matched entry for 0.3.INTA
> pcib0: slot 3 INTA hardwired to IRQ 16
> found-> vendor=0x8086, dev=0x29b6, revid=0x02
>        domain=0, bus=0, slot=3, func=2
>        class=01-01-85, hdrtype=0x00, mfdev=0
>        cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=c, irq=9
>        powerspec 3  supports D0 D3  current D0
>        MSI supports 1 message, 64 bit
>        map[10]: type I/O Port, range 32, base 0x2450, size  3, enabled
>        map[14]: type I/O Port, range 32, base 0x246c, size  2, enabled
>        map[18]: type I/O Port, range 32, base 0x2448, size  3, enabled
>        map[1c]: type I/O Port, range 32, base 0x2468, size  2, enabled
>        map[20]: type I/O Port, range 32, base 0x2420, size  4, enabled
> pcib0: matched entry for 0.3.INTC
> pcib0: slot 3 INTC hardwired to IRQ 18
> found-> vendor=0x8086, dev=0x29b7, revid=0x02
>        domain=0, bus=0, slot=3, func=3
>        class=07-00-02, hdrtype=0x00, mfdev=0
>        cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=b, irq=10
>        powerspec 3  supports D0 D3  current D0
>        MSI supports 1 message, 64 bit
>        map[10]: type I/O Port, range 32, base 0x2440, size  3, enabled
>        map[14]: type Memory, range 32, base 0xe0425000, size 12, enabled
> pcib0: matched entry for 0.3.INTB
> pcib0: slot 3 INTB hardwired to IRQ 17
> found-> vendor=0x8086, dev=0x10bd, revid=0x02
>        domain=0, bus=0, slot=25, func=0
>        class=02-00-00, hdrtype=0x00, mfdev=0
>        cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=11
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 1 message, 64 bit
>        map[10]: type Memory, range 32, base 0xe0400000, size 17, enabled
>        map[14]: type Memory, range 32, base 0xe0424000, size 12, enabled
>        map[18]: type I/O Port, range 32, base 0x2400, size  5, enabled
> pcib0: matched entry for 0.25.INTA
> pcib0: slot 25 INTA hardwired to IRQ 20
> found-> vendor=0x8086, dev=0x2937, revid=0x02
>        domain=0, bus=0, slot=26, func=0
>        class=0c-03-00, hdrtype=0x00, mfdev=1
>        cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=9
>        map[20]: type I/O Port, range 32, base 0x20e0, size  5, enabled
> pcib0: matched entry for 0.26.INTA
> pcib0: slot 26 INTA hardwired to IRQ 18
> found-> vendor=0x8086, dev=0x2938, revid=0x02
>        domain=0, bus=0, slot=26, func=1
>        class=0c-03-00, hdrtype=0x00, mfdev=0
>        cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=b, irq=9
>        map[20]: type I/O Port, range 32, base 0x20c0, size  5, enabled
> pcib0: matched entry for 0.26.INTB
> pcib0: slot 26 INTB hardwired to IRQ 21
> found-> vendor=0x8086, dev=0x2939, revid=0x02
>        domain=0, bus=0, slot=26, func=2
>        class=0c-03-00, hdrtype=0x00, mfdev=0
>        cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=c, irq=10
>        map[20]: type I/O Port, range 32, base 0x20a0, size  5, enabled
> pcib0: matched entry for 0.26.INTC
> pcib0: slot 26 INTC hardwired to IRQ 17
> found-> vendor=0x8086, dev=0x293c, revid=0x02
>        domain=0, bus=0, slot=26, func=7
>        class=0c-03-20, hdrtype=0x00, mfdev=0
>        cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=c, irq=10
>        powerspec 2  supports D0 D3  current D0
>        map[10]: type Memory, range 32, base 0xe0426c00, size 10, enabled
> pcib0: matched entry for 0.26.INTC
> pcib0: slot 26 INTC hardwired to IRQ 17
> found-> vendor=0x8086, dev=0x293e, revid=0x02
>        domain=0, bus=0, slot=27, func=0
>        class=04-03-00, hdrtype=0x00, mfdev=0
>        cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=10
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 1 message, 64 bit
>        map[10]: type Memory, range 64, base 0xe0420000, size 14, enabled
> pcib0: matched entry for 0.27.INTA
> pcib0: slot 27 INTA hardwired to IRQ 22
> found-> vendor=0x8086, dev=0x2940, revid=0x02
>        domain=0, bus=0, slot=28, func=0
>        class=06-04-00, hdrtype=0x01, mfdev=1
>        cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=255
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 1 message
> found-> vendor=0x8086, dev=0x2942, revid=0x02
>        domain=0, bus=0, slot=28, func=1
>        class=06-04-00, hdrtype=0x01, mfdev=1
>        cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
>        intpin=b, irq=255
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 1 message
> found-> vendor=0x8086, dev=0x2944, revid=0x02
>        domain=0, bus=0, slot=28, func=2
>        class=06-04-00, hdrtype=0x01, mfdev=1
>        cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
>        intpin=c, irq=255
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 1 message
> found-> vendor=0x8086, dev=0x2946, revid=0x02
>        domain=0, bus=0, slot=28, func=3
>        class=06-04-00, hdrtype=0x01, mfdev=1
>        cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
>        intpin=d, irq=255
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 1 message
> found-> vendor=0x8086, dev=0x2948, revid=0x02
>        domain=0, bus=0, slot=28, func=4
>        class=06-04-00, hdrtype=0x01, mfdev=1
>        cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=255
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 1 message
> found-> vendor=0x8086, dev=0x2934, revid=0x02
>        domain=0, bus=0, slot=29, func=0
>        class=0c-03-00, hdrtype=0x00, mfdev=1
>        cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=11
>        map[20]: type I/O Port, range 32, base 0x2080, size  5, enabled
> pcib0: matched entry for 0.29.INTA
> pcib0: slot 29 INTA hardwired to IRQ 23
> found-> vendor=0x8086, dev=0x2935, revid=0x02
>        domain=0, bus=0, slot=29, func=1
>        class=0c-03-00, hdrtype=0x00, mfdev=0
>        cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=b, irq=11
>        map[20]: type I/O Port, range 32, base 0x2060, size  5, enabled
> pcib0: matched entry for 0.29.INTB
> pcib0: slot 29 INTB hardwired to IRQ 19
> found-> vendor=0x8086, dev=0x2936, revid=0x02
>        domain=0, bus=0, slot=29, func=2
>        class=0c-03-00, hdrtype=0x00, mfdev=0
>        cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=c, irq=9
>        map[20]: type I/O Port, range 32, base 0x2040, size  5, enabled
> pcib0: matched entry for 0.29.INTC
> pcib0: slot 29 INTC hardwired to IRQ 18
> found-> vendor=0x8086, dev=0x293a, revid=0x02
>        domain=0, bus=0, slot=29, func=7
>        class=0c-03-20, hdrtype=0x00, mfdev=0
>        cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=11
>        powerspec 2  supports D0 D3  current D0
>        map[10]: type Memory, range 32, base 0xe0426800, size 10, enabled
> pcib0: matched entry for 0.29.INTA
> pcib0: slot 29 INTA hardwired to IRQ 23
> found-> vendor=0x8086, dev=0x244e, revid=0x92
>        domain=0, bus=0, slot=30, func=0
>        class=06-04-01, hdrtype=0x01, mfdev=0
>        cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x8086, dev=0x2914, revid=0x02
>        domain=0, bus=0, slot=31, func=0
>        class=06-01-00, hdrtype=0x00, mfdev=1
>        cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x8086, dev=0x2922, revid=0x02
>        domain=0, bus=0, slot=31, func=2
>        class=01-06-01, hdrtype=0x00, mfdev=0
>        cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=9
>        powerspec 3  supports D0 D3  current D0
>        MSI supports 16 messages
>        map[10]: type I/O Port, range 32, base 0x2438, size  3, enabled
>        map[14]: type I/O Port, range 32, base 0x2464, size  2, enabled
>        map[18]: type I/O Port, range 32, base 0x2430, size  3, enabled
>        map[1c]: type I/O Port, range 32, base 0x2460, size  2, enabled
>        map[20]: type I/O Port, range 32, base 0x2020, size  5, enabled
>        map[24]: type Memory, range 32, base 0xe0426000, size 11, enabled
> pcib0: matched entry for 0.31.INTA
> pcib0: slot 31 INTA hardwired to IRQ 21
> found-> vendor=0x8086, dev=0x2930, revid=0x02
>        domain=0, bus=0, slot=31, func=3
>        class=0c-05-00, hdrtype=0x00, mfdev=0
>        cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=b, irq=9
>        map[10]: type Memory, range 64, base 0xe0427000, size  8, enabled
>        map[20]: type I/O Port, range 32, base 0x2000, size  5, enabled
> pcib0: matched entry for 0.31.INTB
> pcib0: slot 31 INTB hardwired to IRQ 18
> vgapci0: <VGA-compatible display> port 0x2458-0x245f mem
> 0xe0380000-0xe03fffff,0xd0000000-0xdfffffff,0xe0200000-0xe02fffff irq
> 16 at device 2.0 on pci0
> agp0: <Intel Q35 SVGA controller> on vgapci0
> vgapci0: Reserved 0x10000000 bytes for rid 0x18 type 3 at 0xd0000000
> vgapci0: Reserved 0x80000 bytes for rid 0x10 type 3 at 0xe0380000
> vgapci0: Reserved 0x100000 bytes for rid 0x1c type 3 at 0xe0200000
> agp0: detected 6140k stolen memory
> agp0: aperture size is 256M
> vgapci1: <VGA-compatible display> mem 0xe0300000-0xe037ffff at device
> 2.1 on pci0
> pci0: <simple comms> at device 3.0 (no driver attached)
> atapci0: <Intel ATA controller> port
> 0x2450-0x2457,0x246c-0x246f,0x2448-0x244f,0x2468-0x246b,0x2420-0x242f
> irq 18 at device 3.2 on pci0
> atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x2420
> ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 49
> atapci0: [MPSAFE]
> atapci0: [ITHREAD]
> ata2: <ATA channel 0> on atapci0
> atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x2450
> atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0x246c
> ata2: reset tp1 mask=03 ostat0=7f ostat1=7f
> ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata2: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata2: reset tp2 stat0=ff stat1=ff devices=0x0
> ata2: [MPSAFE]
> ata2: [ITHREAD]
> ata3: <ATA channel 1> on atapci0
> atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x2448
> atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0x2468
> ata3: reset tp1 mask=03 ostat0=7f ostat1=7f
> ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata3: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata3: reset tp2 stat0=ff stat1=ff devices=0x0
> ata3: [MPSAFE]
> ata3: [ITHREAD]
> pci0: <simple comms, UART> at device 3.3 (no driver attached)
> em0: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0x2400-0x241f
> mem 0xe0400000-0xe041ffff,0xe0424000-0xe0424fff irq 20 at device 25.0
> on pci0
> em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xe0400000
> em0: attempting to allocate 1 MSI vectors (1 supported)
> msi: routing MSI IRQ 256 to local APIC 0 vector 50
> em0: using IRQ 256 for MSI
> em0: Using MSI interrupt
> em0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xe0424000
> em0: The EEPROM Checksum Is Not Valid
> device_attach: em0 attach returned 5
> uhci0: <Intel 82801I (ICH9) USB controller> port 0x20e0-0x20ff irq 18
> at device 26.0 on pci0
> uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x20e0
> uhci0: [MPSAFE]
> uhci0: [ITHREAD]
> uhci0: LegSup = 0x0f10
> usbus0: <Intel 82801I (ICH9) USB controller> on uhci0
> uhci1: <Intel 82801I (ICH9) USB controller> port 0x20c0-0x20df irq 21
> at device 26.1 on pci0
> uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x20c0
> ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 50
> uhci1: [MPSAFE]
> uhci1: [ITHREAD]
> uhci1: LegSup = 0x0f10
> usbus1: <Intel 82801I (ICH9) USB controller> on uhci1
> uhci2: <Intel 82801I (ICH9) USB controller> port 0x20a0-0x20bf irq 17
> at device 26.2 on pci0
> uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x20a0
> ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 51
> uhci2: [MPSAFE]
> uhci2: [ITHREAD]
> uhci2: LegSup = 0x0f10
> usbus2: <Intel 82801I (ICH9) USB controller> on uhci2
> ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem
> 0xe0426c00-0xe0426fff irq 17 at device 26.7 on pci0
> ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xe0426c00
> ehci0: [MPSAFE]
> ehci0: [ITHREAD]
> usbus3: EHCI version 1.0
> usbus3: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0
> pci0: <multimedia, HDA> at device 27.0 (no driver attached)
> pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
> pcib1:   domain            0
> pcib1:   secondary bus     1
> pcib1:   subordinate bus   1
> pcib1:   I/O decode        0x0-0x0
> pcib1:   no prefetched decode
> pci1: <ACPI PCI bus> on pcib1
> pci1: domain=0, physical bus=1
> pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
> pcib2:   domain            0
> pcib2:   secondary bus     2
> pcib2:   subordinate bus   2
> pcib2:   I/O decode        0x0-0x0
> pcib2:   no prefetched decode
> pci2: <ACPI PCI bus> on pcib2
> pci2: domain=0, physical bus=2
> pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0
> pcib3:   domain            0
> pcib3:   secondary bus     3
> pcib3:   subordinate bus   3
> pcib3:   I/O decode        0x1000-0x1fff
> pcib3:   memory decode     0xe0100000-0xe01fffff
> pcib3:   no prefetched decode
> pci3: <ACPI PCI bus> on pcib3
> pci3: domain=0, physical bus=3
> found-> vendor=0x11ab, dev=0x6101, revid=0xb1
>        domain=0, bus=3, slot=0, func=0
>        class=01-01-8f, hdrtype=0x00, mfdev=0
>        cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=9
>        powerspec 2  supports D0 D1 D3  current D0
>        MSI supports 1 message
>        map[10]: type I/O Port, range 32, base 0x1018, size  3, enabled
> pcib3: requested I/O range 0x1018-0x101f: in range
>        map[14]: type I/O Port, range 32, base 0x1024, size  2, enabled
> pcib3: requested I/O range 0x1024-0x1027: in range
>        map[18]: type I/O Port, range 32, base 0x1010, size  3, enabled
> pcib3: requested I/O range 0x1010-0x1017: in range
>        map[1c]: type I/O Port, range 32, base 0x1020, size  2, enabled
> pcib3: requested I/O range 0x1020-0x1023: in range
>        map[20]: type I/O Port, range 32, base 0x1000, size  4, enabled
> pcib3: requested I/O range 0x1000-0x100f: in range
>        map[24]: type Memory, range 32, base 0xe0100000, size  9, enabled
> pcib3: requested memory range 0xe0100000-0xe01001ff: good
> pcib3: matched entry for 3.0.INTA
> pcib3: slot 0 INTA hardwired to IRQ 18
> atapci1: <Marvell 88SX6101 UDMA133 controller> port
> 0x1018-0x101f,0x1024-0x1027,0x1010-0x1017,0x1020-0x1023,0x1000-0x100f
> mem 0xe0100000-0xe01001ff irq 18 at device 0.0 on pci3
> atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1000
> atapci1: [MPSAFE]
> atapci1: [ITHREAD]
> ata4: <ATA channel 0> on atapci1
> atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1018
> atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x1024
> ata4: reset tp1 mask=03 ostat0=50 ostat1=51
> ata4: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
> ata4: stat1=0x10 err=0x01 lsb=0x14 msb=0xeb
> ata4: reset tp2 stat0=00 stat1=10 devices=0x30000
> ata4: [MPSAFE]
> ata4: [ITHREAD]
> pcib4: <ACPI PCI-PCI bridge> at device 28.3 on pci0
> pcib4:   domain            0
> pcib4:   secondary bus     4
> pcib4:   subordinate bus   4
> pcib4:   I/O decode        0x0-0x0
> pcib4:   no prefetched decode
> pci4: <ACPI PCI bus> on pcib4
> pci4: domain=0, physical bus=4
> pcib5: <ACPI PCI-PCI bridge> at device 28.4 on pci0
> pcib5:   domain            0
> pcib5:   secondary bus     5
> pcib5:   subordinate bus   5
> pcib5:   I/O decode        0x0-0x0
> pcib5:   no prefetched decode
> pci5: <ACPI PCI bus> on pcib5
> pci5: domain=0, physical bus=5
> uhci3: <Intel 82801I (ICH9) USB controller> port 0x2080-0x209f irq 23
> at device 29.0 on pci0
> uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2080
> ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 52
> uhci3: [MPSAFE]
> uhci3: [ITHREAD]
> uhci3: LegSup = 0x0f10
> usbus4: <Intel 82801I (ICH9) USB controller> on uhci3
> uhci4: <Intel 82801I (ICH9) USB controller> port 0x2060-0x207f irq 19
> at device 29.1 on pci0
> uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2060
> ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 53
> uhci4: [MPSAFE]
> uhci4: [ITHREAD]
> uhci4: LegSup = 0x0f10
> usbus5: <Intel 82801I (ICH9) USB controller> on uhci4
> uhci5: <Intel 82801I (ICH9) USB controller> port 0x2040-0x205f irq 18
> at device 29.2 on pci0
> uhci5: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2040
> uhci5: [MPSAFE]
> uhci5: [ITHREAD]
> uhci5: LegSup = 0x0f10
> usbus6: <Intel 82801I (ICH9) USB controller> on uhci5
> ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem
> 0xe0426800-0xe0426bff irq 23 at device 29.7 on pci0
> ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xe0426800
> ehci1: [MPSAFE]
> ehci1: [ITHREAD]
> usbus7: EHCI version 1.0
> usbus7: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1
> pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pcib6:   domain            0
> pcib6:   secondary bus     6
> pcib6:   subordinate bus   6
> pcib6:   I/O decode        0xf000-0xfff
> pcib6:   memory decode     0xe0000000-0xe00fffff
> pcib6:   no prefetched decode
> pcib6:   Subtractively decoded bridge.
> pci6: <ACPI PCI bus> on pcib6
> pci6: domain=0, physical bus=6
> found-> vendor=0x168c, dev=0x0013, revid=0x01
>        domain=0, bus=6, slot=0, func=0
>        class=02-00-00, hdrtype=0x00, mfdev=0
>        cmdreg=0x0216, statreg=0x0290, cachelnsz=16 (dwords)
>        lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x1c (7000 ns)
>        intpin=a, irq=9
>        powerspec 2  supports D0 D3  current D0
>        map[10]: type Memory, range 32, base 0xe0000000, size 16, enabled
> pcib6: requested memory range 0xe0000000-0xe000ffff: good
> pcib6: matched entry for 6.0.INTA
> pcib6: slot 0 INTA hardwired to IRQ 21
> found-> vendor=0x11c1, dev=0x5811, revid=0x70
>        domain=0, bus=6, slot=3, func=0
>        class=0c-00-10, hdrtype=0x00, mfdev=0
>        cmdreg=0x0216, statreg=0x0290, cachelnsz=16 (dwords)
>        lattimer=0x20 (960 ns), mingnt=0x0c (3000 ns), maxlat=0x18 (6000 ns)
>        intpin=a, irq=11
>        powerspec 2  supports D0 D1 D2 D3  current D0
>        map[10]: type Memory, range 32, base 0xe0010000, size 12, enabled
> pcib6: requested memory range 0xe0010000-0xe0010fff: good
> pcib6: matched entry for 6.3.INTA
> pcib6: slot 3 INTA hardwired to IRQ 19
> ath0: <Atheros 5212> mem 0xe0000000-0xe000ffff irq 21 at device 0.0 on pci6
> ath0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xe0000000
> ath0: [MPSAFE]
> ath0: [ITHREAD]
> ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
> ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
> 24Mbps 36Mbps 48Mbps 54Mbps
> ath0: turboG rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps
> 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
> ath0: AR2413 mac 7.9 RF2413 phy 4.5
> ath0: Use hw queue 1 for WME_AC_BE traffic
> ath0: Use hw queue 0 for WME_AC_BK traffic
> ath0: Use hw queue 2 for WME_AC_VI traffic
> ath0: Use hw queue 3 for WME_AC_VO traffic
> ath0: Use hw queue 8 for CAB traffic
> ath0: Use hw queue 9 for beacons
> fwohci0: <Lucent FW322/323> mem 0xe0010000-0xe0010fff irq 19 at device
> 3.0 on pci6
> fwohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe0010000
> fwohci0: [MPSAFE]
> fwohci0: [ITHREAD]
> fwohci0: OHCI version 1.0 (ROM=0)
> fwohci0: No. of Isochronous channels is 8.
> fwohci0: EUI64 00:90:27:00:01:d0:dc:04
> fwohci0: Phy 1394a available S400, 2 ports.
> fwohci0: Link S400, max_rec 2048 bytes.
> firewire0: <IEEE1394(FireWire) bus> on fwohci0
> dcons_crom0: <dcons configuration ROM> on firewire0
> dcons_crom0: bus_addr 0x41000
> sbp0: <SBP-2/SCSI over FireWire> on firewire0
> fwohci0: Initiate bus reset
> fwohci0: fwohci_intr_core: BUS reset
> fwohci0: fwohci_intr_core: node_id=0x00000001, SelfID Count=2, CYCLEMASTER
> mode
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci2: <Intel ICH9 SATA300 controller> port
> 0x2438-0x243f,0x2464-0x2467,0x2430-0x2437,0x2460-0x2463,0x2020-0x203f
> mem 0xe0426000-0xe04267ff irq 21 at device 31.2 on pci0
> atapci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2020
> atapci2: [MPSAFE]
> atapci2: [ITHREAD]
> atapci2: Reserved 0x800 bytes for rid 0x24 type 3 at 0xe0426000
> atapci2: AHCI called from vendor specific driver
> atapci2: AHCI v1.20 controller with 6 3Gbps ports, PM supported
> atapci2: Caps: 64bit NCQ SNTF ALP AL CLO 3Gbps PM PMD SSC PSC 32cmd
> CCC EM 6ports
> ata5: <ATA channel 0> on atapci2
> ata5: AHCI reset...
> ata5: hardware reset ...
> ata5: SATA connect time=0ms status=00000123
> ata5: ready wait time=14ms
> ata5: software reset port 15...
> ata5: ready wait time=0ms
> ata5: SIGNATURE: 00000101
> ata5: AHCI reset done: devices=00000001
> ata5: [MPSAFE]
> ata5: [ITHREAD]
> ata6: <ATA channel 1> on atapci2
> ata6: AHCI reset...
> ata6: hardware reset ...
> ata6: SATA connect time=0ms status=00000123
> ata6: ready wait time=49ms
> ata6: software reset port 15...
> ata6: ready wait time=0ms
> ata6: SIGNATURE: 00000101
> ata6: AHCI reset done: devices=00000001
> ata6: [MPSAFE]
> ata6: [ITHREAD]
> ata7: <ATA channel 2> on atapci2
> ata7: AHCI reset...
> ata7: hardware reset ...
> ata7: SATA connect time=0ms status=00000123
> ata7: ready wait time=26ms
> ata7: software reset port 15...
> ata7: ready wait time=0ms
> ata7: SIGNATURE: 00000101
> ata7: AHCI reset done: devices=00000001
> ata7: [MPSAFE]
> ata7: [ITHREAD]
> ata8: <ATA channel 3> on atapci2
> ata8: AHCI reset...
> ata8: hardware reset ...
> ata8: SATA connect timeout status=00000000
> ata8: AHCI reset done: phy reset found no device
> ata8: [MPSAFE]
> ata8: [ITHREAD]
> ata9: <ATA channel 4> on atapci2
> ata9: AHCI reset...
> ata9: hardware reset ...
> ata9: SATA connect time=0ms status=00000123
> ata9: ready wait time=22ms
> ata9: software reset port 15...
> ata9: ready wait time=0ms
> ata9: SIGNATURE: 00000101
> ata9: AHCI reset done: devices=00000001
> ata9: [MPSAFE]
> ata9: [ITHREAD]
> ata10: <ATA channel 5> on atapci2
> ata10: AHCI reset...
> ata10: hardware reset ...
> ata10: SATA connect time=0ms status=00000123
> ata10: ready wait time=22ms
> ata10: software reset port 15...
> ata10: ready wait time=0ms
> ata10: SIGNATURE: 00000101
> ata10: AHCI reset done: devices=00000001
> ata10: [MPSAFE]
> ata10: [ITHREAD]
> ichsmb0: <SMBus controller> port 0x2000-0x201f mem
> 0xe0427000-0xe04270ff irq 18 at device 31.3 on pci0
> ichsmb0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2000
> ichsmb0: [MPSAFE]
> ichsmb0: [ITHREAD]
> smbus0: <System Management Bus> on ichsmb0
> smb0: <SMBus generic I/O> on smbus0
> atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
> atrtc0: registered as a time-of-day clock (resolution 1000000us)
> uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
> ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 54
> uart0: [FILTER]
> uart0: fast interrupt
> uart0: console (115200,n,8,1)
> cpu0: <ACPI CPU> on acpi0
> coretemp0: <CPU On-Die Thermal Sensors> on cpu0
> est0: <Enhanced SpeedStep Frequency Control> on cpu0
> est0: Invalid id16 (set, cur) = (2086, 2346)
> est0: Invalid freq 2664, ignored.
> est0: Invalid id16 (set, cur) = (1826, 2346)
> est0: Invalid freq 2331, ignored.
> est0: Invalid id16 (set, cur) = (1565, 2346)
> est0: Invalid freq 1998, ignored.
> p4tcc0: <CPU Frequency Thermal Control> on cpu0
> cpu1: <ACPI CPU> on acpi0
> coretemp1: <CPU On-Die Thermal Sensors> on cpu1
> est1: <Enhanced SpeedStep Frequency Control> on cpu1
> est1: Invalid id16 (set, cur) = (2086, 2346)
> est1: Invalid freq 2664, ignored.
> est1: Invalid id16 (set, cur) = (1826, 2346)
> est1: Invalid freq 2331, ignored.
> est1: Invalid id16 (set, cur) = (1565, 2346)
> est1: Invalid freq 1998, ignored.
> p4tcc1: <CPU Frequency Thermal Control> on cpu1
> isab0: found ICH9 or equivalent chipset: Intel ICH9DO watchdog timer
> isa_probe_children: disabling PnP devices
> ichwd0: <Intel ICH9DO watchdog timer> on isa0
> isab0: found ICH9 or equivalent chipset: Intel ICH9DO watchdog timer
> ichwd0: Intel ICH9DO watchdog timer (ICH9 or equivalent)
> ichwd0: timer disabled
> atrtc: atrtc0 already exists; skipping it
> sc: sc0 already exists; skipping it
> uart: uart0 already exists; skipping it
> isa_probe_children: probing non-PnP devices
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sc0: fb0, kbd0, terminal emulator: scteken (teken terminal)
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> atkbdc0 failed to probe at port 0x60 on isa0
> fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
> ppc0 failed to probe at irq 7 on isa0
> uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0
> isa_probe_children: probing PnP devices
> Device configuration finished.
> Reducing kern.maxvnodes 508766 -> 100000
> WARNING: ZFS is considered to be an experimental feature in FreeBSD.
> lapic: Divisor 2, Frequency 166747704 hz
> Timecounter "TSC" frequency 3001458636 Hz quality -100
> Timecounters tick every 1.000 msec
> pflog0: bpf attached
> lo0: firewire0: 2 nodes, maxhop <= 1 cable IRM irm(1)  (me)
> firewire0: bus manager 1
> bpf attached
> ata2: Identifying devices: 00000000
> ata2: New devices: 00000000
> ata3: Identifying devices: 00000000
> ata3: New devices: 00000000
> ata4: Identifying devices: 00030000
> ata4: New devices: 00030000
> usbus0: 12Mbps Full Speed USB v1.0
> usbus1: 12Mbps Full Speed USB v1.0
> usbus2: 12Mbps Full Speed USB v1.0
> usbus3: 480Mbps High Speed USB v2.0
> usbus4: 12Mbps Full Speed USB v1.0
> usbus5: 12Mbps Full Speed USB v1.0
> usbus6: 12Mbps Full Speed USB v1.0
> usbus7: 480Mbps High Speed USB v2.0
> ata4-master: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=80 wire
> ata4-slave: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=40 wire
> ugen0.1: <Intel> at usbus0
> uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
> ugen1.1: <Intel> at usbus1
> uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
> ugen2.1: <Intel> at usbus2
> uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
> ugen3.1: <Intel> at usbus3
> uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
> ugen4.1: <Intel> at usbus4
> uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
> ugen5.1: <Intel> at usbus5
> uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
> ugen6.1: <Intel> at usbus6
> uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
> ugen7.1: <Intel> at usbus7
> uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
> ZFS filesystem version 13
> ZFS storage pool version 13
> acd0: <PIONEER DVD-RW DVR-110D/1.37> DVDR drive at ata4 as master
> acd0: read 6890KB/s (6890KB/s) write 5511KB/s (6890KB/s), 2000KB buffer,
> UDMA66
> acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
> acd0: Writes: CDR, CDRW, DVDR, test write, burnproof
> acd0: Audio: play, 256 volume levels
> acd0: Mechanism: ejectable tray, unlocked
> acd0: Medium: no/blank disc
> acd1: DMA limited to UDMA33, device found non-ATA66 cable
> acd1: <DVD-ROM BDV316G/VER 0C17> DVDROM drive at ata4 as slave
> acd1: read 687KB/s (8251KB/s), 512KB buffer, UDMA33
> acd1: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
> acd1: Writes:
> acd1: Audio: play, 256 volume levels
> acd1: Mechanism: ejectable tray, unlocked
> acd1: Medium: no/blank disc
> ata5: Identifying devices: 00000001
> ata5: New devices: 00000001
> ata5-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
> ad10: 476940MB <WDC WD5000AAKS-00YGA0 12.01C02> at ata5-master SATA300
> ad10: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth
> queue
> GEOM: new disk ad10
> ad10: Intel check1 failed
> ad10: Adaptec check1 failed
> ad10: LSI (v3) check1 failed
> ad10: LSI (v2) check1 failed
> ad10: FreeBSD check1 failed
> ata6: Identifying devices: 00000001
> ata6: New devices: 00000001
> ata6-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
> ad12: 476940MB <Seagate ST3500630AS 3.AAK> at ata6-master SATA300
> ad12: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth
> queue
> GEOM: new disk ad12
> firewire0: New S400 device ID:001f5bfffe2776a6
> fwohci0: txd err= 3 miss Ack err
> ad12: Intel check1 failed
> ad12: Adaptec check1 failed
> ad12: LSI (v3) check1 failed
> ad12: LSI (v2) check1 failed
> ad12: FreeBSD check1 failed
> ata7: Identifying devices: 00000001
> ata7: New devices: 00000001
> ata7-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
> ad14: 238475MB <WDC WD2500KS-00MJB0 02.01C03> at ata7-master SATA300
> ad14: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1 depth
> queue
> GEOM: new disk ad14
> ad14: Intel check1 failed
> ad14: Adaptec check1 failed
> ad14: LSI (v3) check1 failed
> ad14: LSI (v2) check1 failed
> ad14: FreeBSD check1 failed
> ata8: Identifying devices: 00000000
> ata8: New devices: 00000000
> ata9: Identifying devices: 00000001
> ata9: New devices: 00000001
> ata9-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
> ad18: 715404MB <Seagate ST3750640AS 3.AAE> at ata9-master SATA300
> ad18: 1465149168 sectors [1453521C/16H/63S] 16 sectors/interrupt 1 depth
> queue
> GEOM: new disk ad18
> ad18: Intel check1 failed
> uhub0: 2 ports with 2 removable, self powered
> uhub1: 2 ports with 2 removable, self powered
> uhub2: 2 ports with 2 removable, self powered
> ad18: Adaptec check1 failed
> uhub4: 2 ports with 2 removable, self powered
> ad18: LSI (v3) check1 failed
> uhub5: 2 ports with 2 removable, self powered
> uhub6: 2 ports with 2 removable, self powered
> ad18: LSI (v2) check1 failed
> ad18: FreeBSD check1 failed
> ata10: Identifying devices: 00000001
> ata10: New devices: 00000001
> ata10-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
> ad20: 715404MB <Seagate ST3750640AS 3.AAE> at ata10-master SATA300
> ad20: 1465149168 sectors [1453521C/16H/63S] 16 sectors/interrupt 1 depth
> queue
> GEOM: new disk ad20
> ad20: Intel check1 failed
> ad20: Adaptec check1 failed
> ad20: LSI (v3) check1 failed
> ad20: LSI (v2) check1 failed
> ad20: FreeBSD check1 failed
> (probe0:sbp0:0:0:0): error 22
> (probe0:sbp0:0:0:0): Unretryable Error
> (probe1:sbp0:0:1:0): error 22
> (probe1:sbp0:0:1:0): Unretryable Error
> (probe2:sbp0:0:2:0): error 22
> (probe2:sbp0:0:2:0): Unretryable Error
> (probe3:sbp0:0:3:0): error 22
> (probe3:sbp0:0:3:0): Unretryable Error
> (probe4:sbp0:0:4:0): error 22
> (probe4:sbp0:0:4:0): Unretryable Error
> (probe5:sbp0:0:5:0): error 22
> (probe5:sbp0:0:5:0): Unretryable Error
> (probe6:sbp0:0:6:0): error 22
> (probe6:sbp0:0:6:0): Unretryable Error
> ATA PseudoRAID loaded
> SMP: AP CPU #1 Launched!
> cpu1 AP:
>     ID: 0x01000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
> ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 1 vector 48
> ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 1 vector 49
> ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 1 vector 50
> WARNING: WITNESS option enabled, expect reduced performance.
> Root mount waiting for: usbus7 usbus3
> Root mount waiting for: usbus7 usbus3
> uhub3: 6 ports with 6 removable, self powered
> uhub7: 6 ports with 6 removable, self powered
> ugen3.2: <vendor 0x0781> at usbus3
> umass0: <vendor 0x0781 product 0x5406, class 0/0, rev 2.00/2.00, addr
> 2> on usbus3
> umass0:  SCSI over Bulk-Only; quirks = 0x0000
> Root mount waiting for: usbus3
> umass0:1:0:-1: Attached to scbus1
> (probe0:umass-sim0:0:0:0): Down reving Protocol Version from 2 to 0?
> GEOM: new disk da0pass0 at umass-sim0 bus 0 target 0 lun 0
>
> pass0: <SanDisk Cruzer 8.02> Removable Direct Access SCSI-0 device
> pass0: 40.000MB/s transfers
> da0 at umass-sim0 bus 0 target 0 lun 0
> da0: <SanDisk Cruzer 8.02> Removable Direct Access SCSI-0 device
> da0: 40.000MB/s transfers
> da0: 3859MB (7905279 512 byte sectors: 255H 63S/T 492C)
> Trying to mount root from zfs:alert
> ugen5.2: <vendor 0x1241> at usbus5
> ukbd0: <vendor 0x1241 product 0x1603, class 0/0, rev 1.10/2.80, addr
> 2> on usbus5
> kbd: new array size 4
> kbd1 at ukbd0
> kbd1: ukbd0, generic (0), config:0x0, flags:0x3d0000
> ugen2.2: <American Power Conversion> at usbus2
> ct_to_ts([2009-07-09 12:36:12]) = 1247142972.000000000
> start_init: trying /sbin/init
> lock order reversal:
>  1st 0xffffffff80815040 pf task mtx (pf task mtx) _at_
> /usr/src/sys/contrib/pf/net/pf_ioctl.c:1394
>  2nd 0xffffffff809f7b40 ifnet (ifnet) _at_ /usr/src/sys/net/if.c:1887
> KDB: stack backtrace:
> db_trace_self_wrapper() at db_trace_self_wrapper+0x2a
> _witness_debugger() at _witness_debugger+0x49
> witness_checkorder() at witness_checkorder+0x7d2
> _rw_rlock() at _rw_rlock+0x60
> ifunit() at ifunit+0x22
> pfioctl() at pfioctl+0x20ea
> devfs_ioctl_f() at devfs_ioctl_f+0x6e
> kern_ioctl() at kern_ioctl+0xbc
> ioctl() at ioctl+0xf0
> syscall() at syscall+0x18b
> Xfast_syscall() at Xfast_syscall+0xd0
> --- syscall (54, FreeBSD ELF64, ioctl), rip = 0x80098a88c, rsp =
> 0x7fffffffb5c8, rbp = 0x7fffffffb710 ---
> lock order reversal:
>  1st 0xffffff0074026098 zfs (zfs) _at_ /usr/src/sys/kern/vfs_mount.c:1054
>  2nd 0xffffff007417dba8 devfs (devfs) _at_ /usr/src/sys/kern/vfs_subr.c:2083
> KDB: stack backtrace:
> db_trace_self_wrapper() at db_trace_self_wrapper+0x2a
> _witness_debugger() at _witness_debugger+0x49
> witness_checkorder() at witness_checkorder+0x7d2
> __lockmgr_args() at __lockmgr_args+0xc92
> vop_stdlock() at vop_stdlock+0x39
> VOP_LOCK1_APV() at VOP_LOCK1_APV+0xc2
> _vn_lock() at _vn_lock+0x50
> vget() at vget+0x6c
> devfs_allocv() at devfs_allocv+0xee
> devfs_root() at devfs_root+0x41
> vfs_donmount() at vfs_donmount+0xf93
> nmount() at nmount+0x74
> syscall() at syscall+0x18b
> Xfast_syscall() at Xfast_syscall+0xd0
> --- syscall (378, FreeBSD ELF64, nmount), rip = 0x8007aaffc, rsp =
> 0x7fffffffdd28, rbp = 0x800a04048 ---
>
> Thanks,
>
> Chris
> --
> _at_chrisattack
> -----------------------------------------
> http://twitter.com/chrisattack
> http://chrisattack.com
> _______________________________________________
> freebsd-current_at_freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org"
>
Received on Thu Jul 09 2009 - 16:35:05 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:51 UTC