wpi card non-functional in 8.0-BETA1

Hi all,

it looks like my wpi card (Intel 3945 ABG) stopped working in 8.0-BETA1/amd64,
at least in WPA2 mode. wpa_supplicant now gives ioctl errors (no log for now :( ).

It worked fine in 7.2-RELEASE/amd64. There, the LED would also light up
(flashing while connecting, solid while connected). But now it always stays dark.

The Bluetooth module (at usbus2) works fine, I can connect it to my cellphone.

I've attached the relevant dmesg parts.

Any clues?

Regards,
Rene
-- 
http://www.rene-ladan.nl/

GPG fingerprint = ADBC ECCD EB5F A6B4 549F  600D 8C9E 647A E564 2BFC (subkeys.pgp.net)

Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-BETA1 #0: Sat Jul  4 02:38:21 UTC 2009
    root_at_mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 CPU         T5600  _at_ 1.83GHz (1828.76-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x6f6  Stepping = 6
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 2147483648 (2048 MB)
avail memory = 2058321920 (1962 MB)
ACPI APIC Table: <AMI    OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <_ASUS_ Notebook> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7ff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci3: <ACPI PCI bus> on pcib3
wpi0: <Intel(R) PRO/Wireless 3945ABG> mem 0xfe1ff000-0xfe1fffff irq 19 at device 0.0 on pci3
wpi0: Driver Revision 20071127
wpi0: Hardware Revision (0x1)
adding chan 1 (2412MHz) flags=0x2b maxpwr=15 passive=0, offset 2
adding chan 2 (2417MHz) flags=0x2b maxpwr=15 passive=0, offset 4
adding chan 3 (2422MHz) flags=0x2b maxpwr=15 passive=0, offset 6
adding chan 4 (2427MHz) flags=0x2b maxpwr=15 passive=0, offset 8
adding chan 5 (2432MHz) flags=0x2b maxpwr=15 passive=0, offset 10
adding chan 6 (2437MHz) flags=0x2b maxpwr=15 passive=0, offset 12
adding chan 7 (2442MHz) flags=0x2b maxpwr=15 passive=0, offset 14
adding chan 8 (2447MHz) flags=0x2b maxpwr=15 passive=0, offset 16
adding chan 9 (2452MHz) flags=0x2b maxpwr=15 passive=0, offset 18
adding chan 10 (2457MHz) flags=0x2b maxpwr=15 passive=0, offset 20
adding chan 11 (2462MHz) flags=0x2b maxpwr=15 passive=0, offset 22
adding chan 12 (2467MHz) flags=0x21 maxpwr=15 passive=1, offset 24
adding chan 13 (2472MHz) flags=0x21 maxpwr=15 passive=1, offset 26
adding chan 34 (5170MHz) flags=0x21 maxpwr=15 passive=1, offset 27
adding chan 36 (5180MHz) flags=0xab maxpwr=15 passive=0, offset 28
adding chan 38 (5190MHz) flags=0x21 maxpwr=15 passive=1, offset 29
adding chan 40 (5200MHz) flags=0xab maxpwr=15 passive=0, offset 30
adding chan 42 (5210MHz) flags=0x21 maxpwr=15 passive=1, offset 31
adding chan 44 (5220MHz) flags=0xab maxpwr=15 passive=0, offset 32
adding chan 46 (5230MHz) flags=0x21 maxpwr=15 passive=1, offset 33
adding chan 48 (5240MHz) flags=0xab maxpwr=15 passive=0, offset 34
adding chan 52 (5260MHz) flags=0xb1 maxpwr=15 passive=1, offset 35
adding chan 56 (5280MHz) flags=0xb1 maxpwr=15 passive=1, offset 36
adding chan 60 (5300MHz) flags=0xb1 maxpwr=15 passive=1, offset 37
adding chan 64 (5320MHz) flags=0xb1 maxpwr=15 passive=1, offset 38
adding chan 100 (5500MHz) flags=0xb1 maxpwr=16 passive=1, offset 39
adding chan 104 (5520MHz) flags=0xb1 maxpwr=16 passive=1, offset 40
adding chan 108 (5540MHz) flags=0xb1 maxpwr=16 passive=1, offset 41
adding chan 112 (5560MHz) flags=0xb1 maxpwr=16 passive=1, offset 42
adding chan 116 (5580MHz) flags=0xb1 maxpwr=16 passive=1, offset 43
adding chan 120 (5600MHz) flags=0xb1 maxpwr=16 passive=1, offset 44
adding chan 124 (5620MHz) flags=0xb1 maxpwr=16 passive=1, offset 45
adding chan 128 (5640MHz) flags=0xb1 maxpwr=16 passive=1, offset 46
adding chan 132 (5660MHz) flags=0xb1 maxpwr=16 passive=1, offset 47
adding chan 136 (5680MHz) flags=0xb1 maxpwr=16 passive=1, offset 48
adding chan 140 (5700MHz) flags=0xb1 maxpwr=16 passive=1, offset 49
power group 0: chan=1 maxpwr=46 temp=-190
	sample 0: index=13 power=42
	sample 1: index=29 power=29
	sample 2: index=47 power=9
	sample 3: index=58 power=-1
	sample 4: index=77 power=-19
power group 1: chan=44 maxpwr=49 temp=-193
	sample 0: index=12 power=40
	sample 1: index=19 power=32
	sample 2: index=32 power=18
	sample 3: index=43 power=7
	sample 4: index=77 power=-25
power group 2: chan=64 maxpwr=49 temp=-191
	sample 0: index=12 power=41
	sample 1: index=20 power=32
	sample 2: index=33 power=19
	sample 3: index=44 power=9
	sample 4: index=77 power=-22
power group 3: chan=116 maxpwr=47 temp=-190
	sample 0: index=12 power=39
	sample 1: index=20 power=31
	sample 2: index=36 power=14
	sample 3: index=48 power=3
	sample 4: index=77 power=-24
power group 4: chan=153 maxpwr=44 temp=-189
	sample 0: index=10 power=36
	sample 1: index=20 power=25
	sample 2: index=32 power=13
	sample 3: index=42 power=5
	sample 4: index=77 power=-26
wpi0: Regulatory Domain: MoW2
wpi0: Hardware Type: B
wpi0: Hardware Revision: ?
wpi0: SKU does support 802.11a
wpi0: [ITHREAD]
...
wpi0: timeout resetting Tx ring 1
wpi0: timeout resetting Tx ring 3
wpi0: timeout resetting Tx ring 4
...
wpi0: <Intel(R) PRO/Wireless 3945ABG> mem 0xfe1ff000-0xfe1fffff irq 19 at device 0.0 on pci3
wpi0: Driver Revision 20071127
wpi0: Hardware Revision (0x1)
adding chan 1 (2412MHz) flags=0x2b maxpwr=15 passive=0, offset 2
adding chan 2 (2417MHz) flags=0x2b maxpwr=15 passive=0, offset 4
adding chan 3 (2422MHz) flags=0x2b maxpwr=15 passive=0, offset 6
adding chan 4 (2427MHz) flags=0x2b maxpwr=15 passive=0, offset 8
adding chan 5 (2432MHz) flags=0x2b maxpwr=15 passive=0, offset 10
adding chan 6 (2437MHz) flags=0x2b maxpwr=15 passive=0, offset 12
adding chan 7 (2442MHz) flags=0x2b maxpwr=15 passive=0, offset 14
adding chan 8 (2447MHz) flags=0x2b maxpwr=15 passive=0, offset 16
adding chan 9 (2452MHz) flags=0x2b maxpwr=15 passive=0, offset 18
adding chan 10 (2457MHz) flags=0x2b maxpwr=15 passive=0, offset 20
adding chan 11 (2462MHz) flags=0x2b maxpwr=15 passive=0, offset 22
adding chan 12 (2467MHz) flags=0x21 maxpwr=15 passive=1, offset 24
adding chan 13 (2472MHz) flags=0x21 maxpwr=15 passive=1, offset 26
adding chan 34 (5170MHz) flags=0x21 maxpwr=15 passive=1, offset 27
adding chan 36 (5180MHz) flags=0xab maxpwr=15 passive=0, offset 28
adding chan 38 (5190MHz) flags=0x21 maxpwr=15 passive=1, offset 29
adding chan 40 (5200MHz) flags=0xab maxpwr=15 passive=0, offset 30
adding chan 42 (5210MHz) flags=0x21 maxpwr=15 passive=1, offset 31
adding chan 44 (5220MHz) flags=0xab maxpwr=15 passive=0, offset 32
adding chan 46 (5230MHz) flags=0x21 maxpwr=15 passive=1, offset 33
adding chan 48 (5240MHz) flags=0xab maxpwr=15 passive=0, offset 34
adding chan 52 (5260MHz) flags=0xb1 maxpwr=15 passive=1, offset 35
adding chan 56 (5280MHz) flags=0xb1 maxpwr=15 passive=1, offset 36
adding chan 60 (5300MHz) flags=0xb1 maxpwr=15 passive=1, offset 37
adding chan 64 (5320MHz) flags=0xb1 maxpwr=15 passive=1, offset 38
adding chan 100 (5500MHz) flags=0xb1 maxpwr=16 passive=1, offset 39
adding chan 104 (5520MHz) flags=0xb1 maxpwr=16 passive=1, offset 40
adding chan 108 (5540MHz) flags=0xb1 maxpwr=16 passive=1, offset 41
adding chan 112 (5560MHz) flags=0xb1 maxpwr=16 passive=1, offset 42
adding chan 116 (5580MHz) flags=0xb1 maxpwr=16 passive=1, offset 43
adding chan 120 (5600MHz) flags=0xb1 maxpwr=16 passive=1, offset 44
adding chan 124 (5620MHz) flags=0xb1 maxpwr=16 passive=1, offset 45
adding chan 128 (5640MHz) flags=0xb1 maxpwr=16 passive=1, offset 46
adding chan 132 (5660MHz) flags=0xb1 maxpwr=16 passive=1, offset 47
adding chan 136 (5680MHz) flags=0xb1 maxpwr=16 passive=1, offset 48
adding chan 140 (5700MHz) flags=0xb1 maxpwr=16 passive=1, offset 49
power group 0: chan=1 maxpwr=46 temp=-190
	sample 0: index=13 power=42
	sample 1: index=29 power=29
	sample 2: index=47 power=9
	sample 3: index=58 power=-1
	sample 4: index=77 power=-19
power group 1: chan=44 maxpwr=49 temp=-193
	sample 0: index=12 power=40
	sample 1: index=19 power=32
	sample 2: index=32 power=18
	sample 3: index=43 power=7
	sample 4: index=77 power=-25
power group 2: chan=64 maxpwr=49 temp=-191
	sample 0: index=12 power=41
	sample 1: index=20 power=32
	sample 2: index=33 power=19
	sample 3: index=44 power=9
	sample 4: index=77 power=-22
power group 3: chan=116 maxpwr=47 temp=-190
	sample 0: index=12 power=39
	sample 1: index=20 power=31
	sample 2: index=36 power=14
	sample 3: index=48 power=3
	sample 4: index=77 power=-24
power group 4: chan=153 maxpwr=44 temp=-189
	sample 0: index=10 power=36
	sample 1: index=20 power=25
	sample 2: index=32 power=13
	sample 3: index=42 power=5
	sample 4: index=77 power=-26
wpi0: Regulatory Domain: MoW2
wpi0: Hardware Type: B
wpi0: Hardware Revision: ?
wpi0: SKU does support 802.11a
wpi0: [ITHREAD]
wpi0: timeout resetting Tx ring 1
wpi0: timeout resetting Tx ring 3
wpi0: timeout resetting Tx ring 4
microcode alive notification version 10e02 alive 1
microcode alive notification version 10e02 alive 1
<here card turned off>
wpi0: Radio Transmitter is switched off
state changed to 1
wpi0: Radio transmitter is switched off
state changed to 0
wpi0: Hardware Switch Enabled
wpi0: timeout resetting Tx ring 1
wpi0: timeout resetting Tx ring 3
wpi0: timeout resetting Tx ring 4
wpi0: detached
wpi0: <Intel(R) PRO/Wireless 3945ABG> mem 0xfe1ff000-0xfe1fffff irq 19 at device 0.0 on pci3
wpi0: Driver Revision 20071127
wpi0: Hardware Revision (0x801)
adding chan 1 (2412MHz) flags=0x2b maxpwr=15 passive=0, offset 2
adding chan 2 (2417MHz) flags=0x2b maxpwr=15 passive=0, offset 4
adding chan 3 (2422MHz) flags=0x2b maxpwr=15 passive=0, offset 6
adding chan 4 (2427MHz) flags=0x2b maxpwr=15 passive=0, offset 8
adding chan 5 (2432MHz) flags=0x2b maxpwr=15 passive=0, offset 10
adding chan 6 (2437MHz) flags=0x2b maxpwr=15 passive=0, offset 12
adding chan 7 (2442MHz) flags=0x2b maxpwr=15 passive=0, offset 14
adding chan 8 (2447MHz) flags=0x2b maxpwr=15 passive=0, offset 16
adding chan 9 (2452MHz) flags=0x2b maxpwr=15 passive=0, offset 18
adding chan 10 (2457MHz) flags=0x2b maxpwr=15 passive=0, offset 20
adding chan 11 (2462MHz) flags=0x2b maxpwr=15 passive=0, offset 22
adding chan 12 (2467MHz) flags=0x21 maxpwr=15 passive=1, offset 24
adding chan 13 (2472MHz) flags=0x21 maxpwr=15 passive=1, offset 26
adding chan 34 (5170MHz) flags=0x21 maxpwr=15 passive=1, offset 27
adding chan 36 (5180MHz) flags=0xab maxpwr=15 passive=0, offset 28
adding chan 38 (5190MHz) flags=0x21 maxpwr=15 passive=1, offset 29
adding chan 40 (5200MHz) flags=0xab maxpwr=15 passive=0, offset 30
adding chan 42 (5210MHz) flags=0x21 maxpwr=15 passive=1, offset 31
adding chan 44 (5220MHz) flags=0xab maxpwr=15 passive=0, offset 32
adding chan 46 (5230MHz) flags=0x21 maxpwr=15 passive=1, offset 33
adding chan 48 (5240MHz) flags=0xab maxpwr=15 passive=0, offset 34
adding chan 52 (5260MHz) flags=0xb1 maxpwr=15 passive=1, offset 35
adding chan 56 (5280MHz) flags=0xb1 maxpwr=15 passive=1, offset 36
adding chan 60 (5300MHz) flags=0xb1 maxpwr=15 passive=1, offset 37
adding chan 64 (5320MHz) flags=0xb1 maxpwr=15 passive=1, offset 38
adding chan 100 (5500MHz) flags=0xb1 maxpwr=16 passive=1, offset 39
adding chan 104 (5520MHz) flags=0xb1 maxpwr=16 passive=1, offset 40
adding chan 108 (5540MHz) flags=0xb1 maxpwr=16 passive=1, offset 41
adding chan 112 (5560MHz) flags=0xb1 maxpwr=16 passive=1, offset 42
adding chan 116 (5580MHz) flags=0xb1 maxpwr=16 passive=1, offset 43
adding chan 120 (5600MHz) flags=0xb1 maxpwr=16 passive=1, offset 44
adding chan 124 (5620MHz) flags=0xb1 maxpwr=16 passive=1, offset 45
adding chan 128 (5640MHz) flags=0xb1 maxpwr=16 passive=1, offset 46
adding chan 132 (5660MHz) flags=0xb1 maxpwr=16 passive=1, offset 47
adding chan 136 (5680MHz) flags=0xb1 maxpwr=16 passive=1, offset 48
adding chan 140 (5700MHz) flags=0xb1 maxpwr=16 passive=1, offset 49
power group 0: chan=1 maxpwr=46 temp=-190
	sample 0: index=13 power=42
	sample 1: index=29 power=29
	sample 2: index=47 power=9
	sample 3: index=58 power=-1
	sample 4: index=77 power=-19
power group 1: chan=44 maxpwr=49 temp=-193
	sample 0: index=12 power=40
	sample 1: index=19 power=32
	sample 2: index=32 power=18
	sample 3: index=43 power=7
	sample 4: index=77 power=-25
power group 2: chan=64 maxpwr=49 temp=-191
	sample 0: index=12 power=41
	sample 1: index=20 power=32
	sample 2: index=33 power=19
	sample 3: index=44 power=9
	sample 4: index=77 power=-22
power group 3: chan=116 maxpwr=47 temp=-190
	sample 0: index=12 power=39
	sample 1: index=20 power=31
	sample 2: index=36 power=14
	sample 3: index=48 power=3
	sample 4: index=77 power=-24
power group 4: chan=153 maxpwr=44 temp=-189
	sample 0: index=10 power=36
	sample 1: index=20 power=25
	sample 2: index=32 power=13
	sample 3: index=42 power=5
	sample 4: index=77 power=-26
wpi0: Regulatory Domain: MoW2
wpi0: Hardware Type: B
wpi0: Hardware Revision: ?
wpi0: SKU does support 802.11a
wpi0: [ITHREAD]
wpi0: timeout resetting Tx ring 1
wpi0: timeout resetting Tx ring 3
wpi0: timeout resetting Tx ring 4
microcode alive notification version 10e02 alive 1
microcode alive notification version 10e02 alive 1
...