Re: bge problems when resuming

Gonzalo Nemmi wrote:
> Hi Adam, Paul ...
> I'm the "another individual" from you OP. 
> I have the same problems you have regarding bge, but they weren't 
> trumped .. I just had an order of priorities ;)
>
> Anyways, I tried the solution Paul posted and, just as in your case, I 
> got a hard lock too ...
>
> I tried loading if_bge through /boot/loader.conf
> Then issued a:
>
> kldunload if_bge coretemp
> acpiconf -s 3
>
> machine suspended 
>
> As soon as I woke it up I got the following message followed by a hard 
> lock:
>
> fwohci0: Phy 1394a available S400, 1 ports.
> fwohci0: Link S400, max_rec 2048 bytes.
> fwohci0: Initiate bus reset
> fwohci0: fwohci_intr_core: BUS reset
> fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, 
> CYCLEMASTER mode
> firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
> firewire0: bus manager 0
> fwohci0: unrecoverable error
> bge0: <Broadmcom NetXtreme Ethernet Controller, unknown ASIC rev, 
> 0xffff> mem 0xf69f0000-0xf69fffff irq 17 at device 0.0 on pci9
>
> All this happens on a Dell 1318, FreeBSD 8.0-BETA1, i386, Intel(R) 
> Celeron(R) CPU 560_at_2.13GHz.
>
> bge0_at_pci0:9:0:0:	class=0x020000 card=0x02861028 chip=0x171314e4 rev=0x02 
> hdr=0x00
>     vendor     = 'Broadcom Corporation'
>     device     = 'Broadcom NetLink (TM) Fast Ethernet (BCM5906m)'
>     class      = network
>     subclass   = ethernet
>     bar   [10] = type Memory, range 64, base 0xf69f0000, size 65536, 
> enabled
>     cap 01[48] = powerspec 3  supports D0 D3  current D0
>     cap 03[50] = VPD
>     cap 09[58] = vendor (length 120)
>     cap 05[e8] = MSI supports 1 message, 64 bit enabled with 1 message
>     cap 10[d0] = PCI-Express 1 endpoint max data 128(128) link x1(x1)
>
> If somebody needs more info, just ask me for it and I'll try to answer 
> as soon as I can.
>
> Adam, if you do file a PR, please let me know so I can follow it.
>
> Best Regards
>   

Thanks for the reminder :-)

http://www.freebsd.org/cgi/query-pr.cgi?pr=136876