On Sunday 19 July 2009 7:53:52 pm Paul B. Mahol wrote: > On 7/20/09, Gonzalo Nemmi <gnemmi_at_gmail.com> wrote: > > On Sat, Jul 18, 2009 at 12:09 AM, Paul B. Mahol <onemda_at_gmail.com> wrote: > >> On 7/17/09, Gonzalo Nemmi <gnemmi_at_gmail.com> wrote: > >> > On Wednesday 15 July 2009 8:13:47 am Adam K Kirchhoff wrote: > >> >> On Wednesday 15 July 2009 03:20:45 Paul B. Mahol wrote: > >> >> > On 7/15/09, Adam K Kirchhoff <adamk_at_voicenet.com> wrote: > >> >> > > Hello all, > >> >> > > > >> >> > > I have a Dell Latitude D610 laptop with 8.0-BETA1 > >> >> > > installed. I hadn't tried suspend/resume for a while and > >> >> > > decided to give it a shot. I was pleasantly surprised to > >> >> > > see that I could suspend to ram, resume, and have a > >> >> > > (relatively) working system (previously the display would > >> >> > > never come back up and the serial console I had hooked up > >> >> > > remained dead). Great job to everyone who helped make that > >> >> > > possible. > >> >> > > > >> >> > > The only real issue that I seem to have now is that bge is > >> >> > > completely unusable after resume. Another individual seems > >> >> > > to have reported similar problems with bge and resume, but > >> >> > > he also had other issues that apparently trumped his > >> >> > > networking issues: > >> >> > > > >> >> > > http://lists.freebsd.org/pipermail/freebsd-current/2009-Jul > >> >> > >y/0090 23.html > >> >> > > > >> >> > > Like him, resuming from suspend gives me: > >> >> > > > >> >> > > Jul 14 12:35:53 scroll kernel: bge0: PHY write timed out > >> >> > > (phy 1, reg 0, val 32768) > >> >> > > Jul 14 12:35:53 scroll kernel: bge0: PHY read timed out > >> >> > > (phy 1, reg 0, val 0xffffffff) > >> >> > > Jul 14 12:35:53 scroll kernel: bge0: PHY write timed out > >> >> > > (phy 1, reg 24, val 3072) > >> >> > > Jul 14 12:35:53 scroll kernel: bge0: PHY write timed out > >> >> > > (phy 1, reg 23, val 10) > >> >> > > Jul 14 12:35:53 scroll kernel: bge0: PHY write timed out > >> >> > > (phy 1, reg 21, val 12555) > >> >> > > Jul 14 12:35:53 scroll kernel: bge0: PHY write timed out > >> >> > > (phy 1, reg 23, val 8223) > >> >> > > Jul 14 12:35:53 scroll kernel: bge0: PHY write timed out > >> >> > > (phy 1, reg 21, val 38150) > >> >> > > Jul 14 12:35:53 scroll kernel: bge0: PHY write timed out > >> >> > > (phy 1, reg 23, val 16415) > >> >> > > Jul 14 12:35:53 scroll kernel: bge0: PHY write timed out > >> >> > > (phy 1, reg 21, val 5346) > >> >> > > Jul 14 12:35:53 scroll kernel: bge0: PHY write timed out > >> >> > > (phy 1, reg 24, val 1024) > >> >> > > Jul 14 12:35:53 scroll kernel: bge0: PHY write timed out > >> >> > > (phy 1, reg 24, val 7) > >> >> > > > >> >> > > And so on and so forth. > >> >> > > > >> >> > > I thought that compiling if_bge as a module, unloading it > >> >> > > before suspend, and reloading it after resume, might get > >> >> > > this working. However, doing a "kldload if_bge" after the > >> >> > > resume does nothing. Well, the module gets loaded, but the > >> >> > > device doesn't show up. No errors from kldload, and there > >> >> > > is nothing new in dmesg. > >> >> > > > >> >> > > Before the suspend, the device shows up as: > >> >> > > > >> >> > > bge0_at_pci0:2:0:0: class=0x020000 card=0x01821028 > >> >> > > chip=0x167714e4 rev=0x01 hdr=0x00 > >> >> > > vendor = 'Broadcom Corporation' > >> >> > > device = 'NetXtreme Gigabit Ethernet PCI Express > >> >> > > (BCM5750A1)' class = network > >> >> > > subclass = ethernet > >> >> > > > >> >> > > After resuming, and reloading the module, it's: > >> >> > > > >> >> > > none1_at_pci0:2:0:0: class=0x020000 card=0x01821028 > >> >> > > chip=0x167714e4 rev=0x01 hdr=0x00 > >> >> > > vendor = 'Broadcom Corporation' > >> >> > > device = 'NetXtreme Gigabit Ethernet PCI Express > >> >> > > (BCM5750A1)' class = network > >> >> > > subclass = ethernet > >> >> > > > >> >> > > If there are no ideas, I'll go ahead and open up a pr. I > >> >> > > assume this is just one bug, since both problems (the PHY > >> >> > > issues and the inability to reload the driver) are both > >> >> > > related to the network device. > >> >> > > >> >> > Put this lines into loader.conf and reboot. > >> >> > > >> >> > hw.pci.do_power_nodriver="3" > >> >> > hw.pci.do_power_resume="1" > >> >> > > >> >> > Now, before suspend, unload if_bge and some another driver > >> >> > (sound drivers are best candidate) and load sound driver > >> >> > again, suspend and resume. > >> >> > Now loading if_bge should make it succesfully attach. > >> >> > >> >> Unfortunately, after doing this, reloading the if_bge driver > >> >> causes the laptop to completely lock up... It gets as far as: > >> >> > >> >> bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, unknown > >> >> ASIC rev. 0xffff> > >> >> mem 0xdfdf0000-0xdfdfffff irq 16 at device 0.0 on pci2 > >> >> > >> >> And then the entire machine hangs. I'm on ttyv0, so I'd see > >> >> any kernel panic, but nothing like that happens. The screen > >> >> stays on, but nothing else happens till I force a reboot. > >> >> > >> >> Adam > >> > > >> > Hi Adam, Paul ... > >> > I'm the "another individual" from you OP. > >> > I have the same problems you have regarding bge, but they > >> > weren't trumped .. I just had an order of priorities ;) > >> > > >> > Anyways, I tried the solution Paul posted and, just as in your > >> > case, I got a hard lock too ... > >> > > >> > I tried loading if_bge through /boot/loader.conf > >> > Then issued a: > >> > > >> > kldunload if_bge coretemp > >> > >> coretemp is wrong module, it must be one of modules that attach to > >> pci. > > > > Sorry Paul! > > I gave it a go with snd_hda and I got the same result except that > > this time I also got the following message: > > After unloading snd_hda you loaded it again before suspending? Doing so yielded a Fatal trap 12 on BETA2. Yesterday I install BETA2 and here are the results: kldstat Id Refs Address Size Name 1 28 0xc0400000 cf6c70 kernel 2 1 0xc10f7000 11bc0 if_bge.ko 3 1 0xc1109000 1ac4c snd_hda.ko 4 2 0xc1124000 61f78 sound.ko 5 1 0xc1186000 2af4 coretemp.ko 6 1 0xc1189000 a6d8 i915.ko 7 2 0xc1194000 177d4 drm.ko kldunload if_bge snd_hda Jul 20 17:50:49 gargoyle login: ROOT LOGIN (root) ON ttyv0 Jul 20 17:51:06 gargoyle kernel: brgphy0: detached Jul 20 17:51:06 gargoyle kernel: lock order reversal: Jul 20 17:51:06 gargoyle kernel: 1st 0xc0dba45c kernel linker (kernel linker) _at_ /usr/src/sys/kern/kern_linker.c:1079 Jul 20 17:51:06 gargoyle kernel: 2nd 0xc0dbbc64 sysctl lock (sysctl lock) _at_ /usr/src/sys/kern/kern_sysctl.c:257 Jul 20 17:51:06 gargoyle kernel: KDB: stack backtrace: Jul 20 17:51:06 gargoyle kernel: db_trace_self_wrapper(c0c6baf4,e6daba34,c08bc995,c08ad6db,c0c6e989,...) at db_trace_self_wrapper+0x26 Jul 20 17:51:06 gargoyle kernel: kdb_backtrace(c08ad6db,c0c6e989,c452bc88,c4529e10,e6daba90,...) at kdb_backtrace+0x29 Jul 20 17:51:06 gargoyle kernel: _witness_debugger(c0c6e989,c0dbbc64,c0c69667,c4529e10,c0c6956e,...) at _witness_debugger+0x25 Jul 20 17:51:06 gargoyle kernel: witness_checkorder(c0dbbc64,9,c0c6956e,101,0,...) at witness_checkorder+0x839 Jul 20 17:51:06 gargoyle kernel: _sx_xlock(c0dbbc64,0,c0c6956e,101,c4722c00,...) at _sx_xlock+0x85 Jul 20 17:51:06 gargoyle kernel: sysctl_ctx_free(c4722c4c,c4722c00,e6dabb18,c08a3c85,c4722c00,...) at sysctl_ctx_free+0x30 Jul 20 17:51:06 gargoyle kernel: device_sysctl_fini(c4722c00,0,c0d4c848,c472a810,c4ab3400,...) at device_sysctl_fini+0x1a Jul 20 17:51:06 gargoyle kernel: device_detach(c4722c00,c4722b80,e6dabb38,c06bc622,c4722b80,...) at device_detach+0x1f5 Jul 20 17:51:06 gargoyle kernel: bus_generic_detach(c4722b80,c4722b80,e6dabb64,c08a3b1c,c4722b80,...) at bus_generic_detach+0x29 Jul 20 17:51:06 gargoyle kernel: miibus_detach(c4722b80,c45d6060,c0d4ca68,a3c,c0c76f47,...) at miibus_detach+0x12 Jul 20 17:51:06 gargoyle kernel: device_detach(c4722b80,c472b008,e6dabb98,c10ff7ff,c4722300,...) at device_detach+0x8c Jul 20 17:51:06 gargoyle kernel: bus_generic_detach(c4722300,1,c1104b66,aec,c4722300,...) at bus_generic_detach+0x29 Jul 20 17:51:06 gargoyle kernel: bge_detach(c4722300,c4677060,c0d4ca68,a3c,c4526300,...) at bge_detach+0xbf Jul 20 17:51:06 gargoyle kernel: device_detach(c4722300,c086c843,c0dbb570,c1106c20,c456fb80,...) at device_detach+0x8c Jul 20 17:51:06 gargoyle kernel: driver_module_handler(c4526300,1,c1106c20,109,0,...) at driver_module_handler+0x29c Jul 20 17:51:06 gargoyle kernel: module_unload(c4526300,c0c652ef,273,270,c08604b6,...) at module_unload+0x43 Jul 20 17:51:06 gargoyle kernel: linker_file_unload(c4544200,0,c0c652ef,437,c10f7000,...) at linker_file_unload+0x15e Jul 20 17:51:06 gargoyle kernel: kern_kldunload(c4b346c0,2,0,e6dabd2c,c0ba8dd3,...) at kern_kldunload+0xd5 Jul 20 17:51:06 gargoyle kernel: kldunloadf(c4b346c0,e6dabcf8,8,c0c6fa4b,c0d50450,...) at kldunloadf+0x2b Jul 20 17:51:06 gargoyle kernel: syscall(e6dabd38) at syscall+0x2a3 Jul 20 17:51:06 gargoyle kernel: Xint0x80_syscall() at Xint0x80_syscall+0x20 Jul 20 17:51:06 gargoyle kernel: --- syscall (444, FreeBSD ELF32, kldunloadf), eip = 0x280d516b, esp = 0xbfbfe47c, ebp = 0xbfbfecc8 --- Jul 20 17:51:06 gargoyle kernel: miibus0: detached Jul 20 17:51:06 gargoyle kernel: bge0: detached Jul 20 17:51:06 gargoyle kernel: sysctl_unregister_oid: failed to unregister sysctl Jul 20 17:51:06 gargoyle kernel: pcm0: detached Jul 20 17:51:06 gargoyle kernel: hdac0: detached kld snd_hda Jul 20 17:52:16 gargoyle kernel: hdac0: <Intel 82801H High Definition Audio Controller> mem 0xf6dfc000-0xf6dfffff irq 21 at device 27.0 on pci0 Jul 20 17:52:16 gargoyle kernel: hdac0: HDA Driver Revision: 20090624_0136 Jul 20 17:52:16 gargoyle kernel: hdac0: [ITHREAD] Jul 20 17:52:16 gargoyle kernel: hdac0: HDA Codec #0: Sigmatel STAC9228X Jul 20 17:52:16 gargoyle kernel: bge0: <Broadcom BCM5906 A2, ASIC rev. 0xc002> mem 0xf69f0000-0xf69fffff irq 17 at device 0.0 on pci9 Jul 20 17:52:16 gargoyle kernel: miibus0: <MII bus> on bge0 Jul 20 17:52:16 gargoyle kernel: brgphy0: <BCM5906 10/100baseTX PHY> PHY 1 on miibus0 Jul 20 17:52:16 gargoyle kernel: brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Jul 20 17:52:16 gargoyle kernel: bge0: Ethernet address: 00:23:ae:04:ba:ca Jul 20 17:52:16 gargoyle kernel: bge0: [ITHREAD] Jul 20 17:52:16 gargoyle kernel: pcm0: <HDA Sigmatel STAC9228X PCM #0 Analog> at cad 0 nid 1 on hdac0 Jul 20 17:52:16 gargoyle kernel: bge0: link state changed to DOWN Jul 20 17:52:18 gargoyle kernel: bge0: link state changed to UP acpiconf -s 3 Jul 20 17:53:51 gargoyle acpi: suspend at 20090720 17:53:51 Jul 20 17:53:56 gargoyle kernel: fwohci0: fwohci_pci_suspend Jul 20 17:54:25 gargoyle kernel: bge0: PHY write timed out (phy 1, reg 0, val 32768) Jul 20 17:54:25 gargoyle kernel: bge0: PHY read timed out (phy 1, reg 0, val 0xffffffff) Jul 20 17:54:25 gargoyle kernel: bge0: PHY read timed out (phy 1, reg 24, val 0xffffffff) Jul 20 17:54:25 gargoyle kernel: bge0: PHY read timed out (phy 1, reg 16, val 0xffffffff) Jul 20 17:54:25 gargoyle kernel: bge0: PHY write timed out (phy 1, reg 16, val 0) Jul 20 17:54:25 gargoyle kernel: bge0: PHY read timed out (phy 1, reg 16, val 0xffffffff) Jul 20 17:54:25 gargoyle kernel: bge0: PHY write timed out (phy 1, reg 16, val 0) Jul 20 17:54:25 gargoyle kernel: bge0: PHY write timed out (phy 1, reg 23, val 18) Jul 20 17:54:25 gargoyle kernel: bge0: flow-through queue init failed Jul 20 17:54:25 gargoyle kernel: bge0: initialization failure Jul 20 17:54:25 gargoyle kernel: fwohci0: Phy 1394a available S400, 1 ports. Jul 20 17:54:25 gargoyle kernel: fwohci0: Link S400, max_rec 2048 bytes. Jul 20 17:54:25 gargoyle kernel: fwohci0: Initiate bus reset Jul 20 17:54:25 gargoyle kernel: fwohci0: fwohci_intr_core: BUS reset Jul 20 17:54:25 gargoyle kernel: fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode Jul 20 17:54:25 gargoyle kernel: firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) Jul 20 17:54:25 gargoyle kernel: firewire0: bus manager 0 Jul 20 17:54:25 gargoyle kernel: fwohci0: unrecoverable error Jul 20 17:54:25 gargoyle kernel: wakeup from sleeping state (slept 00:00:29) Jul 20 17:54:25 gargoyle acpi: resumed at 20090720 17:54:25 Should a PR on fwohci and firewire also be filed?? Best Regards Gonzalo Nemmi > > fwohci0: ... > > firewire0: ... > > fwohci0: ... > > pci0: < multimedia HDA > at device 27.0 ( no driver attached ) > > bge0 ... > > > > Then, the same hard lock :( > > > > Will install BETA2 today ! > > > > Best Regards > > Gonzalo > > > >> > acpiconf -s 3 > >> > > >> > machine suspended > >> > > >> > As soon as I woke it up I got the following message followed by > >> > a hard lock: > >> > > >> > fwohci0: Phy 1394a available S400, 1 ports. > >> > fwohci0: Link S400, max_rec 2048 bytes. > >> > fwohci0: Initiate bus reset > >> > fwohci0: fwohci_intr_core: BUS reset > >> > fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, > >> > CYCLEMASTER mode > >> > firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) > >> > firewire0: bus manager 0 > >> > fwohci0: unrecoverable error > >> > bge0: <Broadmcom NetXtreme Ethernet Controller, unknown ASIC > >> > rev, 0xffff> mem 0xf69f0000-0xf69fffff irq 17 at device 0.0 on > >> > pci9 > >> > > >> > All this happens on a Dell 1318, FreeBSD 8.0-BETA1, i386, > >> > Intel(R) Celeron(R) CPU 560_at_2.13GHz. > >> > > >> > bge0_at_pci0:9:0:0: class=0x020000 card=0x02861028 > >> > chip=0x171314e4 > >> > >> rev=0x02 > >> > >> > hdr=0x00 > >> > vendor = 'Broadcom Corporation' > >> > device = 'Broadcom NetLink (TM) Fast Ethernet > >> > (BCM5906m)' class = network > >> > subclass = ethernet > >> > bar [10] = type Memory, range 64, base 0xf69f0000, size > >> > 65536, enabled > >> > cap 01[48] = powerspec 3 supports D0 D3 current D0 > >> > cap 03[50] = VPD > >> > cap 09[58] = vendor (length 120) > >> > cap 05[e8] = MSI supports 1 message, 64 bit enabled with 1 > >> > message cap 10[d0] = PCI-Express 1 endpoint max data 128(128) > >> > link x1(x1) > >> > > >> > If somebody needs more info, just ask me for it and I'll try to > >> > answer as soon as I can. > >> > > >> > Adam, if you do file a PR, please let me know so I can follow > >> > it. > >> > > >> > Best Regards > >> > -- > >> > Blessings > >> > Gonzalo Nemmi > >> > >> -- > >> Paul -- Blessings Gonzalo NemmiReceived on Mon Jul 20 2009 - 19:03:40 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:52 UTC