Re: msi broken?

From: Arno J. Klaassen <arno_at_heho.snv.jussieu.fr>
Date: Tue, 10 Mar 2009 20:00:00 +0100
John Baldwin <jhb_at_freebsd.org> writes:

> On Tuesday 10 March 2009 10:08:59 am Arno J. Klaassen wrote:
>> 
>> Hello,
>> 
>> when upgrading this morning from a March 1 -current, if_bge
>> stopped working (and irq256: bge0 not showing up in
>> vmstat -i ). Setting hw.pci.enable_msi="0" makes it work again.
>
> Can you get a verbose dmesg (boot -v) with MSI enabled?

Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-CURRENT #1: Sun Mar  1 23:38:34 CET 2009
    toor_at_siamesetwins:/usr/obj/raid1/bsd/src-current/sys/S3992
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80849000.
Preloaded elf obj module "/boot/kernel/ipfw.ko" at 0xffffffff808491e8.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2194561626 Hz
CPU: Quad-Core AMD Opteron(tm) Processor 2354 (2194.56-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x100f23  Stepping = 3
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x802009<SSE3,MON,CX16,POPCNT>
  AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x7ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS>
  TSC: P-state invariant
  Cores per package: 4
L1 2MB data TLB: 48 entries, fully associative
L1 2MB instruction TLB: 16 entries, fully associative
L1 4KB data TLB: 48 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB data TLB: 128 entries, 2-way associative
L2 2MB instruction TLB: 0 entries, 2-way associative
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
usable memory = 8581632000 (8184 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x0000000000097fff, 618496 bytes (151 pages)
0x0000000000872000 - 0x00000000bffeffff, 3212304384 bytes (784254 pages)
0x0000000100000000 - 0x000000023032ffff, 5103616000 bytes (1246000 pages)
avail memory  = 8280162304 (7896 MB)
ACPI APIC Table: <103007 APIC2012>
INTR: Adding local APIC 1 as a target
INTR: Adding local APIC 2 as a target
INTR: Adding local APIC 3 as a target
INTR: Adding local APIC 4 as a target
INTR: Adding local APIC 5 as a target
INTR: Adding local APIC 6 as a target
INTR: Adding local APIC 7 as a target
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
 cpu4 (AP): APIC ID:  4
 cpu5 (AP): APIC ID:  5
 cpu6 (AP): APIC ID:  6
 cpu7 (AP): APIC ID:  7
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
APIC: CPU 2 has ACPI ID 3
APIC: CPU 3 has ACPI ID 4
APIC: CPU 4 has ACPI ID 5
APIC: CPU 5 has ACPI ID 6
APIC: CPU 6 has ACPI ID 7
APIC: CPU 7 has ACPI ID 8
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
ULE: setup cpu 4
ULE: setup cpu 5
ULE: setup cpu 6
ULE: setup cpu 7
ACPI: RSDP _at_ 0x0xf9330/0x0024 (v  2 ACPIAM)
ACPI: XSDT _at_ 0x0xbfff0100/0x0054 (v  1 103007 XSDT2012 0x20071030 MSFT 0x00000097)
ACPI: FACP _at_ 0x0xbfff0290/0x00F4 (v  3 103007 FACP2012 0x20071030 MSFT 0x00000097)
ACPI: DSDT _at_ 0x0xbfff0460/0x36D7 (v  1  0AAAB 0AAAB001 0x00000001 INTL 0x02002026)
ACPI: FACS _at_ 0x0xbfffe000/0x0040
ACPI: APIC _at_ 0x0xbfff0390/0x00CA (v  1 103007 APIC2012 0x20071030 MSFT 0x00000097)
ACPI: OEMB _at_ 0x0xbfffe040/0x0056 (v  1 103007 OEMB2012 0x20071030 MSFT 0x00000097)
ACPI: SRAT _at_ 0x0xbfff3b40/0x0150 (v  1 AMD    HAMMER   0x00000001 AMD  0x00000001)
ACPI: HPET _at_ 0x0xbfff3c90/0x0038 (v  1 103007 OEMHPET  0x20071030 MSFT 0x00000097)
ACPI: SSDT _at_ 0x0xbfff3cd0/0x143C (v  1 A M I  POWERNOW 0x00000001 AMD  0x00000001)
MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Found IO APIC ID 9, Interrupt 16 at 0xfec01000
MADT: Found IO APIC ID 10, Interrupt 32 at 0xfec02000
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
lapic2: Routing NMI -> LINT1
lapic2: LINT1 trigger: edge
lapic2: LINT1 polarity: high
lapic3: Routing NMI -> LINT1
lapic3: LINT1 trigger: edge
lapic3: LINT1 polarity: high
lapic4: Routing NMI -> LINT1
lapic4: LINT1 trigger: edge
lapic4: LINT1 polarity: high
lapic5: Routing NMI -> LINT1
lapic5: LINT1 trigger: edge
lapic5: LINT1 polarity: high
lapic6: Routing NMI -> LINT1
lapic6: LINT1 trigger: edge
lapic6: LINT1 polarity: high
lapic7: Routing NMI -> LINT1
lapic7: LINT1 trigger: edge
lapic7: LINT1 polarity: high
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0: intpin 9 polarity: low
ioapic0: intpin 9 trigger: level
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
ioapic2 <Version 1.1> irqs 32-47 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00000400
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
io: <I/O>
acpi0: <103007 XSDT2012> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, bff00000 (3) failed
ACPI timer: 0/4 0/3 0/4 0/4 0/4 0/3 0/4 0/3 0/4 0/3 -> 0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    9   N     0  3 4 5 7 9 11 12 14 15
  Validation          0    9   N     0  3 4 5 7 9 11 12 14 15
  After Disable       0  255   N     0  3 4 5 7 9 11 12 14 15
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  1 3 4 5 6 7 9 11 12 14 15
  Validation          0   11   N     0  1 3 4 5 6 7 9 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
pci_link8:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
pci_link9:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
pci_link10:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    7   N     0  1 3 4 5 6 7 9 11 12 14 15
  Validation          0    7   N     0  1 3 4 5 6 7 9 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
pci_link11:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    5   N     0  1 3 4 5 6 7 9 11 12 14 15
  Validation          0    5   N     0  1 3 4 5 6 7 9 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
pci_link12:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    9   N     0  1 3 4 5 6 7 9 11 12 14 15
  Validation          0    9   N     0  1 3 4 5 6 7 9 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
pci_link13:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
pci_link14:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
pci_link15:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
pci_link16:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
pci_link17:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
pci_link18:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
pci_link19:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
pci_link20:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
pci_link21:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
pci_link22:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
pci_link23:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
pci_link24:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
pci_link25:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
pci_link26:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
pci_link27:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
pci_link28:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
pci_link29:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
pci_link30:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  Validation          0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
  After Disable       0  255   N     0  1 3 4 5 6 7 9 11 12 14 15
pci_link31:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  10
  Validation          0   10   N     0  10
  After Disable       0  255   N     0  10
pci_link32:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  11
  Validation          0   11   N     0  11
  After Disable       0  255   N     0  11
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x1166 rev: 0x1 num: 2 hz: 14318180 opts: legacy_route 64-bit
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x1166, dev=0x0036, revid=0x00
	domain=0, bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0xf8 (7440 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1166, dev=0x0205, revid=0x00
	domain=0, bus=0, slot=2, func=0
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0107, statreg=0x0200, cachelnsz=0 (dwords)
	lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1166, dev=0x0214, revid=0x00
	domain=0, bus=0, slot=2, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0200, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[20]: type I/O Port, range 32, base 0xffa0, size  4, enabled
found->	vendor=0x1166, dev=0x0234, revid=0x00
	domain=0, bus=0, slot=2, func=2
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0107, statreg=0x0200, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1166, dev=0x0223, revid=0x01
	domain=0, bus=0, slot=3, func=0
	class=0c-03-10, hdrtype=0x00, mfdev=1
	cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xff6ec000, size 12, enabled
	map[14]: type I/O Port, range 32, base 0xd400, size  8, enabled
pcib0: matched entry for 0.3.INTA
pcib0: slot 3 INTA hardwired to IRQ 10
ioapic0: Changing trigger for pin 10 to level
ioapic0: Changing polarity for pin 10 to low
found->	vendor=0x1166, dev=0x0223, revid=0x01
	domain=0, bus=0, slot=3, func=1
	class=0c-03-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xff6ed000, size 12, enabled
	map[14]: type I/O Port, range 32, base 0xd800, size  8, enabled
pcib0: matched entry for 0.3.INTA
pcib0: slot 3 INTA hardwired to IRQ 10
found->	vendor=0x1166, dev=0x0223, revid=0x01
	domain=0, bus=0, slot=3, func=2
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xff6ee000, size 12, enabled
	map[14]: type I/O Port, range 32, base 0xe800, size  8, enabled
pcib0: matched entry for 0.3.INTA
pcib0: slot 3 INTA hardwired to IRQ 10
found->	vendor=0x8086, dev=0x1229, revid=0x10
	domain=0, bus=0, slot=4, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0117, statreg=0x0290, cachelnsz=16 (dwords)
	lattimer=0xf8 (7440 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
	intpin=a, irq=9
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xff6eb000, size 12, enabled
	map[14]: type I/O Port, range 32, base 0xec00, size  6, enabled
	map[18]: type Memory, range 32, base 0xff6a0000, size 17, enabled
pcib0: matched entry for 0.4.INTA
pcib0: slot 4 INTA hardwired to IRQ 16
found->	vendor=0x1166, dev=0x0130, revid=0xb0
	domain=0, bus=0, slot=6, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0xf8 (7440 ns), mingnt=0x04 (1000 ns), maxlat=0x02 (500 ns)
found->	vendor=0x1166, dev=0x0130, revid=0xb0
	domain=0, bus=0, slot=7, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0xf8 (7440 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1166, dev=0x0132, revid=0xb0
	domain=0, bus=0, slot=8, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1166, dev=0x0132, revid=0xb0
	domain=0, bus=0, slot=9, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1166, dev=0x0132, revid=0xb0
	domain=0, bus=0, slot=10, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1166, dev=0x0132, revid=0xb0
	domain=0, bus=0, slot=11, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1002, dev=0x515e, revid=0x02
	domain=0, bus=0, slot=12, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0187, statreg=0x0290, cachelnsz=16 (dwords)
	lattimer=0xf8 (7440 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Prefetchable Memory, range 32, base 0xd8000000, size 27, enabled
	map[14]: type I/O Port, range 32, base 0xe000, size  8, enabled
	map[18]: type Memory, range 32, base 0xff6f0000, size 16, enabled
pcib0: matched entry for 0.12.INTA
pcib0: slot 12 INTA hardwired to IRQ 17
found->	vendor=0x1022, dev=0x1200, revid=0x00
	domain=0, bus=0, slot=24, func=0
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1201, revid=0x00
	domain=0, bus=0, slot=24, func=1
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1202, revid=0x00
	domain=0, bus=0, slot=24, func=2
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1203, revid=0x00
	domain=0, bus=0, slot=24, func=3
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1204, revid=0x00
	domain=0, bus=0, slot=24, func=4
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1200, revid=0x00
	domain=0, bus=0, slot=25, func=0
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1201, revid=0x00
	domain=0, bus=0, slot=25, func=1
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1202, revid=0x00
	domain=0, bus=0, slot=25, func=2
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1203, revid=0x00
	domain=0, bus=0, slot=25, func=3
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1204, revid=0x00
	domain=0, bus=0, slot=25, func=4
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     1
pcib1:   subordinate bus   2
pcib1:   I/O decode        0xa000-0xbfff
pcib1:   memory decode     0xfef00000-0xfeffffff
pcib1:   no prefetched decode
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found->	vendor=0x1166, dev=0x0104, revid=0xc0
	domain=0, bus=1, slot=13, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0016, statreg=0x0230, cachelnsz=16 (dwords)
	lattimer=0xf8 (7440 ns), mingnt=0x04 (1000 ns), maxlat=0x02 (500 ns)
found->	vendor=0x1166, dev=0x024a, revid=0x00
	domain=0, bus=1, slot=14, func=0
	class=01-04-05, hdrtype=0x00, mfdev=0
	cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
	map[10]: type I/O Port, range 32, base 0xbc00, size  3, enabled
pcib1: requested I/O range 0xbc00-0xbc07: in range
	map[14]: type I/O Port, range 32, base 0xb880, size  2, enabled
pcib1: requested I/O range 0xb880-0xb883: in range
	map[18]: type I/O Port, range 32, base 0xb800, size  3, enabled
pcib1: requested I/O range 0xb800-0xb807: in range
	map[1c]: type I/O Port, range 32, base 0xb480, size  2, enabled
pcib1: requested I/O range 0xb480-0xb483: in range
	map[20]: type I/O Port, range 32, base 0xb400, size  5, enabled
pcib1: requested I/O range 0xb400-0xb41f: in range
	map[24]: type Memory, range 32, base 0xfeffe000, size 13, enabled
pcib1: requested memory range 0xfeffe000-0xfeffffff: good
pcib1: matched entry for 1.14.INTA
pcib1: slot 14 INTA hardwired to IRQ 11
ioapic0: Changing trigger for pin 11 to level
ioapic0: Changing polarity for pin 11 to low
pcib2: <ACPI PCI-PCI bridge> at device 13.0 on pci1
pcib2:   domain            0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0x0-0x0
pcib2:   no prefetched decode
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
atapci0: <ServerWorks HT1000 SATA150 controller> port 0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb807,0xb480-0xb483,0xb400-0xb41f mem 0xfeffe000-0xfeffffff irq 11 at device 14.0 on pci1
atapci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb400
ioapic0: routing intpin 11 (ISA IRQ 11) to lapic 0 vector 49
atapci0: [MPSAFE]
atapci0: [ITHREAD]
atapci0: Reserved 0x2000 bytes for rid 0x24 type 3 at 0xfeffe000
ata2: <ATA channel 0> on atapci0
ata2: reset tp1 mask=01 ostat0=7f ostat1=00
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: reset tp2 stat0=ff stat1=00 devices=0x0
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: reset tp1 mask=01 ostat0=7f ostat1=00
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: reset tp2 stat0=ff stat1=00 devices=0x0
ata3: [MPSAFE]
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: reset tp1 mask=01 ostat0=7f ostat1=00
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: reset tp2 stat0=ff stat1=00 devices=0x0
ata4: [MPSAFE]
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: reset tp1 mask=01 ostat0=7f ostat1=00
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: reset tp2 stat0=ff stat1=00 devices=0x0
ata5: [MPSAFE]
ata5: [ITHREAD]
atapci1: <ServerWorks HT1000 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 2.1 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0
ata0: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 50
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 51
ata1: [MPSAFE]
ata1: [ITHREAD]
isab0: <PCI-ISA bridge> at device 2.2 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, USB> at device 3.0 (no driver attached)
pci0: <serial bus, USB> at device 3.1 (no driver attached)
pci0: <serial bus, USB> at device 3.2 (no driver attached)
pci0: <network, ethernet> at device 4.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pcib3:   domain            0
pcib3:   secondary bus     3
pcib3:   subordinate bus   3
pcib3:   I/O decode        0x0-0x0
pcib3:   no prefetched decode
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
pcib4: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pcib4:   domain            0
pcib4:   secondary bus     4
pcib4:   subordinate bus   4
pcib4:   I/O decode        0x0-0x0
pcib4:   memory decode     0xff000000-0xff0fffff
pcib4:   prefetched decode 0xcfd00000-0xcfdfffff
pci4: <ACPI PCI bus> on pcib4
pci4: domain=0, physical bus=4
found->	vendor=0x14e4, dev=0x166a, revid=0x10
	domain=0, bus=4, slot=4, func=0
	class=02-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0116, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0xf8 (7440 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=7
	powerspec 2  supports D0 D3  current D0
	MSI supports 8 messages, 64 bit
	map[10]: type Memory, range 64, base 0xff0d0000, size 16, enabled
pcib4: requested memory range 0xff0d0000-0xff0dffff: good
	map[18]: type Memory, range 64, base 0xff0c0000, size 16, enabled
pcib4: requested memory range 0xff0c0000-0xff0cffff: good
pcib4: matched entry for 4.4.INTA
pcib4: slot 4 INTA hardwired to IRQ 26
found->	vendor=0x14e4, dev=0x166a, revid=0x10
	domain=0, bus=4, slot=4, func=1
	class=02-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0116, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0xf8 (7440 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=5
	powerspec 2  supports D0 D3  current D0
	MSI supports 8 messages, 64 bit
	map[10]: type Memory, range 64, base 0xff0f0000, size 16, enabled
pcib4: requested memory range 0xff0f0000-0xff0fffff: good
	map[18]: type Memory, range 64, base 0xff0e0000, size 16, enabled
pcib4: requested memory range 0xff0e0000-0xff0effff: good
pcib4: matched entry for 4.4.INTB
pcib4: slot 4 INTB hardwired to IRQ 27
pci4: <network, ethernet> at device 4.0 (no driver attached)
pci4: <network, ethernet> at device 4.1 (no driver attached)
pcib5: <ACPI PCI-PCI bridge> at device 8.0 on pci0
pcib5:   domain            0
pcib5:   secondary bus     5
pcib5:   subordinate bus   7
pcib5:   I/O decode        0x0-0x0
pcib5:   memory decode     0xff100000-0xff5fffff
pcib5:   prefetched decode 0xcfe00000-0xcfefffff
pci5: <ACPI PCI bus> on pcib5
pci5: domain=0, physical bus=5
found->	vendor=0x8086, dev=0x0370, revid=0x00
	domain=0, bus=5, slot=0, func=0
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
found->	vendor=0x8086, dev=0x0372, revid=0x00
	domain=0, bus=5, slot=0, func=2
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
pcib6: <PCI-PCI bridge> at device 0.0 on pci5
pcib6:   domain            0
pcib6:   secondary bus     7
pcib6:   subordinate bus   7
pcib6:   I/O decode        0x0-0x0
pcib6:   memory decode     0xff100000-0xff5fffff
pcib6:   prefetched decode 0xcfe00000-0xcfefffff
pci7: <PCI bus> on pcib6
pci7: domain=0, physical bus=7
found->	vendor=0x9005, dev=0x0285, revid=0x00
	domain=0, bus=7, slot=14, func=0
	class=01-04-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0196, statreg=0x0230, cachelnsz=16 (dwords)
	lattimer=0xf8 (7440 ns), mingnt=0x01 (250 ns), maxlat=0x01 (250 ns)
	intpin=a, irq=9
	powerspec 2  supports D0 D1 D3  current D0
	MSI supports 2 messages, 64 bit
	map[10]: type Memory, range 64, base 0xff400000, size 21, enabled
pcib6: requested memory range 0xff400000-0xff5fffff: good
pcib5: requested memory range 0xff400000-0xff5fffff: good
pcib5: matched entry for 5.0.INTC
pcib5: slot 0 INTC hardwired to IRQ 28
pcib6: slot 14 INTA is routed to irq 28
aac0: <Adaptec RAID 3405> mem 0xff400000-0xff5fffff irq 28 at device 14.0 on pci7
aac0: Reserved 0x200000 bytes for rid 0x10 type 3 at 0xff400000
aac0: Enabling 64-bit address support
aac0: Enable Raw I/O
aac0: Enable 64-bit array
aac0: New comm. interface enabled
ioapic1: routing intpin 12 (PCI IRQ 28) to lapic 0 vector 52
aac0: [MPSAFE]
aac0: [ITHREAD]
aac0: XScale 80321 500MHz, 128MB memory (111MB cache, 17MB execution), optional battery not installed
aac0: Kernel 5.2-0, Build 15323, S/N 14BB38
aac0: Supported Options=7f1d7d<SNAPSHOT,WCACHE,DATA64,HOSTTIME,RAID50,WINDOW4GB,SOFTERR,SGMAP64,ALARM,NONDASD,ADPTINFO,NEWCOMM,ARRAY64BIT,HEATSENSOR>
aac0: Adaptec 3405, aac driver 2.0.0-1
pcib7: <PCI-PCI bridge> at device 0.2 on pci5
pcib7:   domain            0
pcib7:   secondary bus     6
pcib7:   subordinate bus   6
pcib7:   I/O decode        0x0-0x0
pcib7:   no prefetched decode
pci6: <PCI bus> on pcib7
pci6: domain=0, physical bus=6
pcib8: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pcib8:   domain            0
pcib8:   secondary bus     8
pcib8:   subordinate bus   8
pcib8:   I/O decode        0x0-0x0
pcib8:   no prefetched decode
pci8: <ACPI PCI bus> on pcib8
pci8: domain=0, physical bus=8
pcib9: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pcib9:   domain            0
pcib9:   secondary bus     9
pcib9:   subordinate bus   9
pcib9:   I/O decode        0x0-0x0
pcib9:   no prefetched decode
pci9: <ACPI PCI bus> on pcib9
pci9: domain=0, physical bus=9
pcib10: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pcib10:   domain            0
pcib10:   secondary bus     10
pcib10:   subordinate bus   10
pcib10:   I/O decode        0x0-0x0
pcib10:   no prefetched decode
pcib10: could not get PCI interrupt routing table for \\_SB_.PCI0.BR46 - AE_NOT_FOUND
pci10: <ACPI PCI bus> on pcib10
pci10: domain=0, physical bus=10
vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xd8000000-0xdfffffff,0xff6f0000-0xff6fffff irq 17 at device 12.0 on pci0
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 53
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 54
uart0: [FILTER]
uart0: fast interrupt
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 55
uart1: [FILTER]
uart1: fast interrupt
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
isa_probe_children: disabling PnP devices
atkbdc: atkbdc0 already exists; skipping it
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
uart: uart1 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xc9000-0xce7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
uart2: not probed (disabled)
uart3: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 513765 -> 100000
linsysfs registered
procfs registered
linprocfs registered
lapic: Divisor 2, Frequency 99752807 hz
Timecounter "TSC" frequency 2194561626 Hz quality -100
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to deny, logging disabled
lo0: bpf attached
ata0: Identifying devices: 00000001
ata0: New devices: 00000001
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=80 wire
ad0: setting PIO4 on HT1000 chip
ad0: setting UDMA100 on HT1000 chip
ad0: 194481MB <Maxtor 6Y200P0 YAR41BW0> at ata0-master UDMA100
ad0: 398297088 sectors [395136C/16H/63S] 16 sectors/interrupt 1 depth queue
ata1: Identifying devices: 00000000
ata1: New devices: 00000000
ata2: Identifying devices: 00000000
ata2: New devices: 00000000
ata3: Identifying devices: 00000000
ata3: New devices: 00000000
ata4: Identifying devices: 00000000
ata4: New devices: 00000000GEOM: new disk ad0

ata5: Identifying devices: 00000000
ata5: New devices: 00000000
aacd0: <Volume> on aac0
aacd0: 69890MB (143134720 sectors)
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x01000000   VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
SMP: AP CPU #2 Launched!
cpu2 AP:
     ID: 0x02000000   VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
SMP: AP CPU #3 Launched!
cpu3 AP:
     ID: 0x03000000   VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
SMP: AP CPU #4 Launched!
cpu4 AP:
     ID: 0x04000000   VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
SMP: AP CPU #6 Launched!
cpu6 AP:
     ID: 0x06000000   VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
SMP: AP CPU #5 Launched!
cpu5 AP:
     ID: 0x05000000   VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
SMP: AP CPU #7 Launched!
cpu7 AP:
     ID: 0x07000000   VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 1 vector 48
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 2 vector 48
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 3 vector 48
ioapic0: routing intpin 11 (ISA IRQ 11) to lapic 4 vector 48
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 5 vector 48
ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 6 vector 48
ioapic1: routing intpin 12 (PCI IRQ 28) to lapic 7 vector 48
GEOM: new disk aacd0
Trying to mount root from ufs:/dev/aacd0s1a
ct_to_ts([2009-03-10 18:48:25]) = 1236710905.000000000
start_init: trying /sbin/init
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
hwpstate0: SVI mode
hwpstate0: you have 5 P-state.
hwpstate0: freq=2200MHz volts=1250mV
hwpstate0: freq=2000MHz volts=1250mV
hwpstate0: freq=1700MHz volts=1175mV
hwpstate0: freq=1400MHz volts=1125mV
hwpstate0: freq=1100MHz volts=1050mV
hwpstate0: Now P0-state.
hwpstate1: <Cool`n'Quiet 2.0> on cpu1
hwpstate1: SVI mode
hwpstate1: you have 5 P-state.
hwpstate1: freq=2200MHz volts=1250mV
hwpstate1: freq=2000MHz volts=1250mV
hwpstate1: freq=1700MHz volts=1175mV
hwpstate1: freq=1400MHz volts=1125mV
hwpstate1: freq=1100MHz volts=1050mV
hwpstate1: Now P0-state.
hwpstate2: <Cool`n'Quiet 2.0> on cpu2
hwpstate2: SVI mode
hwpstate2: you have 5 P-state.
hwpstate2: freq=2200MHz volts=1250mV
hwpstate2: freq=2000MHz volts=1250mV
hwpstate2: freq=1700MHz volts=1175mV
hwpstate2: freq=1400MHz volts=1125mV
hwpstate2: freq=1100MHz volts=1050mV
hwpstate2: Now P0-state.
hwpstate3: <Cool`n'Quiet 2.0> on cpu3
hwpstate3: SVI mode
hwpstate3: you have 5 P-state.
hwpstate3: freq=2200MHz volts=1250mV
hwpstate3: freq=2000MHz volts=1250mV
hwpstate3: freq=1700MHz volts=1175mV
hwpstate3: freq=1400MHz volts=1125mV
hwpstate3: freq=1100MHz volts=1050mV
hwpstate3: Now P0-state.
hwpstate4: <Cool`n'Quiet 2.0> on cpu4
hwpstate4: SVI mode
hwpstate4: you have 5 P-state.
hwpstate4: freq=2200MHz volts=1250mV
hwpstate4: freq=2000MHz volts=1250mV
hwpstate4: freq=1700MHz volts=1175mV
hwpstate4: freq=1400MHz volts=1125mV
hwpstate4: freq=1100MHz volts=1050mV
hwpstate4: Now P0-state.
hwpstate5: <Cool`n'Quiet 2.0> on cpu5
hwpstate5: SVI mode
hwpstate5: you have 5 P-state.
hwpstate5: freq=2200MHz volts=1250mV
hwpstate5: freq=2000MHz volts=1250mV
hwpstate5: freq=1700MHz volts=1175mV
hwpstate5: freq=1400MHz volts=1125mV
hwpstate5: freq=1100MHz volts=1050mV
hwpstate5: Now P0-state.
hwpstate6: <Cool`n'Quiet 2.0> on cpu6
hwpstate6: SVI mode
hwpstate6: you have 5 P-state.
hwpstate6: freq=2200MHz volts=1250mV
hwpstate6: freq=2000MHz volts=1250mV
hwpstate6: freq=1700MHz volts=1175mV
hwpstate6: freq=1400MHz volts=1125mV
hwpstate6: freq=1100MHz volts=1050mV
hwpstate6: Now P0-state.
hwpstate7: <Cool`n'Quiet 2.0> on cpu7
hwpstate7: SVI mode
hwpstate7: you have 5 P-state.
hwpstate7: freq=2200MHz volts=1250mV
hwpstate7: freq=2000MHz volts=1250mV
hwpstate7: freq=1700MHz volts=1175mV
hwpstate7: freq=1400MHz volts=1125mV
hwpstate7: freq=1100MHz volts=1050mV
hwpstate7: Now P0-state.
tap0: bpf attached
tap0: Ethernet address: 00:bd:6b:04:00:00
pci0: driver added
found->	vendor=0x1166, dev=0x0223, revid=0x01
	domain=0, bus=0, slot=3, func=0
	class=0c-03-10, hdrtype=0x00, mfdev=1
	cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
pci0:0:3:0: reprobing on driver added
found->	vendor=0x1166, dev=0x0223, revid=0x01
	domain=0, bus=0, slot=3, func=1
	class=0c-03-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
pci0:0:3:1: reprobing on driver added
found->	vendor=0x1166, dev=0x0223, revid=0x01
	domain=0, bus=0, slot=3, func=2
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
pci0:0:3:2: reprobing on driver added
found->	vendor=0x8086, dev=0x1229, revid=0x10
	domain=0, bus=0, slot=4, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0117, statreg=0x0290, cachelnsz=16 (dwords)
	lattimer=0xf8 (7440 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
	intpin=a, irq=16
	powerspec 2  supports D0 D1 D2 D3  current D0
pci0:0:4:0: reprobing on driver added
pci1: driver added
pci2: driver added
pci3: driver added
pci4: driver added
found->	vendor=0x14e4, dev=0x166a, revid=0x10
	domain=0, bus=4, slot=4, func=0
	class=02-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0116, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0xf8 (7440 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=26
	powerspec 2  supports D0 D3  current D0
	MSI supports 8 messages, 64 bit
pci0:4:4:0: reprobing on driver added
pci0:4:4:0: bad VPD cksum, remain 14
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x8100> mem 0xff0d0000-0xff0dffff,0xff0c0000-0xff0cffff irq 26 at device 4.0 on pci4
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xff0d0000
bge0: attempting to allocate 1 MSI vectors (8 supported)
bge0: using IRQ 256 for MSI
miibus0: <MII bus> on bge0
brgphy0: <BCM5780 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: OUI 0x000818, model 0x0035, rev. 0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: bpf attached
bge0: Ethernet address: 00:e0:81:4d:5d:b8
msi: Assigning MSI IRQ 256 to local APIC 0 vector 48
bge0: [MPSAFE]
bge0: [ITHREAD]
found->	vendor=0x14e4, dev=0x166a, revid=0x10
	domain=0, bus=4, slot=4, func=1
	class=02-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0116, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0xf8 (7440 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=27
	powerspec 2  supports D0 D3  current D0
	MSI supports 8 messages, 64 bit
pci0:4:4:1: reprobing on driver added
pci0:4:4:1: bad VPD cksum, remain 14
bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x8100> mem 0xff0f0000-0xff0fffff,0xff0e0000-0xff0effff irq 27 at device 4.1 on pci4
bge1: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xff0f0000
bge1: attempting to allocate 1 MSI vectors (8 supported)
bge1: using IRQ 257 for MSI
miibus1: <MII bus> on bge1
brgphy1: <BCM5780 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1: OUI 0x000818, model 0x0035, rev. 0
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge1: bpf attached
bge1: Ethernet address: 00:e0:81:4d:5d:b9
msi: Assigning MSI IRQ 257 to local APIC 1 vector 49
bge1: [MPSAFE]
bge1: [ITHREAD]
pci5: driver added
pci6: driver added
pci7: driver added
pci8: driver added
pci9: driver added
pci10: driver added
pci0: driver added
found->	vendor=0x1166, dev=0x0223, revid=0x01
	domain=0, bus=0, slot=3, func=0
	class=0c-03-10, hdrtype=0x00, mfdev=1
	cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
pci0:0:3:0: reprobing on driver added
found->	vendor=0x1166, dev=0x0223, revid=0x01
	domain=0, bus=0, slot=3, func=1
	class=0c-03-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
pci0:0:3:1: reprobing on driver added
found->	vendor=0x1166, dev=0x0223, revid=0x01
	domain=0, bus=0, slot=3, func=2
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
pci0:0:3:2: reprobing on driver added
found->	vendor=0x8086, dev=0x1229, revid=0x10
	domain=0, bus=0, slot=4, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0117, statreg=0x0290, cachelnsz=16 (dwords)
	lattimer=0xf8 (7440 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
	intpin=a, irq=16
	powerspec 2  supports D0 D1 D2 D3  current D0
pci0:0:4:0: reprobing on driver added
fxp0: <Intel 82551 Pro/100 Ethernet> port 0xec00-0xec3f mem 0xff6eb000-0xff6ebfff,0xff6a0000-0xff6bffff irq 16 at device 4.0 on pci0
fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xff6eb000
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1229 8086 1040 0010
fxp0: Dynamic Standby mode is disabled
miibus2: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> PHY 1 on miibus2
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp0: Ethernet address: 00:e0:81:4d:78:a5
ioapic1: routing intpin 0 (PCI IRQ 16) to lapic 2 vector 49
fxp0: [MPSAFE]
fxp0: [ITHREAD]
pci1: driver added
pci2: driver added
pci3: driver added
pci4: driver added
pci5: driver added
pci6: driver added
pci7: driver added
pci8: driver added
pci9: driver added
pci10: driver added
Received on Tue Mar 10 2009 - 18:50:43 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:43 UTC