On Tuesday 10 March 2009 3:00:00 pm Arno J. Klaassen wrote: > John Baldwin <jhb_at_freebsd.org> writes: > > > On Tuesday 10 March 2009 10:08:59 am Arno J. Klaassen wrote: > >> > >> Hello, > >> > >> when upgrading this morning from a March 1 -current, if_bge > >> stopped working (and irq256: bge0 not showing up in > >> vmstat -i ). Setting hw.pci.enable_msi="0" makes it work again. > > > > Can you get a verbose dmesg (boot -v) with MSI enabled? Ok, so you are getting MSI interrupts assigned and routed ok. Can you try disabling the code that sets the INTx_MASK flag in the PCI command register in sys/dev/pci/pci.c:pci_setup_intr()? -- John BaldwinReceived on Tue Mar 10 2009 - 19:38:29 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:43 UTC