John Baldwin <jhb_at_freebsd.org> writes: > On Tuesday 10 March 2009 3:00:00 pm Arno J. Klaassen wrote: >> John Baldwin <jhb_at_freebsd.org> writes: >> >> > On Tuesday 10 March 2009 10:08:59 am Arno J. Klaassen wrote: >> >> >> >> Hello, >> >> >> >> when upgrading this morning from a March 1 -current, if_bge >> >> stopped working (and irq256: bge0 not showing up in >> >> vmstat -i ). Setting hw.pci.enable_msi="0" makes it work again. >> > >> > Can you get a verbose dmesg (boot -v) with MSI enabled? > > Ok, so you are getting MSI interrupts assigned and routed ok. Can you try > disabling the code that sets the INTx_MASK flag in the PCI command register > in sys/dev/pci/pci.c:pci_setup_intr()? Bon, "rid" is 0 in my case; outcommenting the "pci_clear_command_bit(dev, child, PCIM_CMD_INTxDIS);" makes no difference, and reverting rev189447 (forcing the "else" statement to be executed) gives me a panic ... But I'm not 100% sure that's what you wanted me to do ... More tomorrow, ArnoReceived on Tue Mar 10 2009 - 21:51:52 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:43 UTC