Re: MITSUMI USB FDD with USB4BSD does not work, neither

On Thu, 12 Mar 2009 09:14:11 +0100
Hans Petter Selasky <hselasky_at_c2i.net> wrote:

> On Thursday 12 March 2009, Yoshihiro Ota wrote:
> > On Wed, 11 Mar 2009 08:51:00 +0100
> >
> > Hans Petter Selasky <hselasky_at_c2i.net> wrote:
> > > On Wednesday 11 March 2009, Yoshihiro Ota wrote:
> > > > On Sat, 28 Feb 2009 10:06:51 +0100
> > > >
> > > > Hans Petter Selasky <hselasky_at_c2i.net> wrote:
> > > > > On Saturday 28 February 2009, Yoshihiro Ota wrote:
> > > > > > I have a MITSUMI USB fdd and pluged in to 8-CURRENT.
> > > > > > FreeBSD 8.0-CURRENT #5 r189058M: Thu Feb 26 11:29:13 EST 2009
> > > > > >
> > > > > > It printed as following but nothing happened there after.
> > > > > >
> > > > > > ugen0.3: <MITSUMI> at usbus0
> > > > > > umass0: <MITSUMI MITSUMI USB FDD, class 0/0, rev 1.10/1.00, addr 3>
> > > > > > on usbus0 umass0:  SCSI over Bulk-Only; quirks = 0x0100
> > > > >
> > > > >                                         ^^^ your device is listed
> > > > > with quirks. Maybe the quirks are incorrect. Please check the quirk
> > > > > table in /sys/dev/usb/storage/umass.c
> > > >
> > > > What do I do?
> > > > Do I try each of quirks one by one?
> > > >
> > > > Thanks.
> > > > Hiro
> > >
> > > Try removing the quirk for your device.
> > >
> > > --HPS
> >
> > Removing did help.
> 
> What did you get when you removed the quirk?
> 
> --HPS
> 
> 
> > I also tested with a few combinations of quirks but didn't help, neither.
> >
> > It used to work back in 6.x era.
> > I may try to bring 6.x back to try it out...
> >
> > Hiro

These are outputs.
Let me know if you need more.

Thanks,
Hiro

# uname -a
FreeBSD xxx 8.0-CURRENT FreeBSD 8.0-CURRENT #20 r189720M:
 Fri Mar 13 10:18:31 EDT 2009 xxx/sys/GENERIC  amd64
# dmesg
ugen0.3: <MITSUMI> at usbus0
umass0: <MITSUMI MITSUMI USB FDD, class 0/0, rev 1.10/1.00, addr 3> on usbus0
umass0:  UFI over CBI with CCI; quirks = 0x0000
umass0:0:0:-1: Attached to scbus0
(da0:umass-sim0:0:0:0): got CAM status 0x4
(da0:umass-sim0:0:0:0): fatal error, failed to attach to device
(da0:umass-sim0:0:0:0): lost device
(da0:umass-sim0:0:0:0): removing device entry
# usbconfig list
ugen0.1: <OHCI root HUB nVidia> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
ugen1.1: <EHCI root HUB nVidia> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON
ugen1.2: <USB 2.0 Camera Sonix Technology Co., Ltd.> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON
ugen0.2: <product 0x4d05 Primax Electronics> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON
ugen0.3: <MITSUMI USB FDD MITSUMI> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
# camcontrol devlist -v
scbus0 on umass-sim0 bus 0:
<MITSUMI USB FDD 1049>             at scbus0 target 0 lun 0 (pass0)
scbus-1 on xpt0 bus 0:
<  >                               at scbus-1 target -1 lun -1 (xpt0)
# dmesg
(da0:umass-sim0:0:0:0): removing device entry
umass0: at uhub0, port 1, addr 3 (disconnected)
ugen0.3: <MITSUMI> at usbus0 (disconnected)