Re: usb mouse w/ -current

  I mistakenly included wrong dmesg that was from kernel recognizing MS mouse.
Dmesg with kernel that does not recognize MS mouse was as follows ( full dmesg follows);

(TYD3 adds options LINPROCFS and COMPAT_LINUX32, and device sound and atapicam.)

Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-CURRENT #275: Tue Mar 17 18:30:27 JST 2009
    ken_at_tyd3.sub.tydfam.jp:/usr/obj/usr/src/sys/TYD3
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Phenom(tm) 9500 Quad-Core Processor (2210.07-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x100f22  Stepping = 2
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x802009<SSE3,MON,CX16,POPCNT>
  AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x7ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS>
  TSC: P-state invariant
  Cores per package: 4
usable memory = 4278259712 (4080 MB)
avail memory  = 4115169280 (3924 MB)
ACPI APIC Table: <GBT    GBTUACPI>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <GBT GBTUACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cfde0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x3008-0x300b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: HPET never increments, disabling
device_attach: acpi_hpet0 attach returned 6
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 2.0 on pci0
pci1: <PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xbf00-0xbf7f mem 0xfa000000-0xfaffffff,0xd0000000-0xdfffffff,0xf8000000-0xf9ffffff irq 18 at device 0.0 on pci1
pcib2: <PCI-PCI bridge> at device 6.0 on pci0
pci2: <PCI bus> on pcib2
re0: <RealTek 8168/8168B/8168C/8168CP/8168D/8111B/8111C/8111CP PCIe Gigabit Ethernet> port 0xae00-0xaeff mem 0xfdfff000-0xfdffffff irq 18 at device 0.0 on pci2
re0: Using 1 MSI messages
re0: Chip rev. 0x38000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: Ethernet address: 00:1a:4d:5b:bf:26
re0: [FILTER]
pcib3: <PCI-PCI bridge> at device 7.0 on pci0
pci3: <PCI bus> on pcib3
re1: <RealTek 8168/8168B/8168C/8168CP/8168D/8111B/8111C/8111CP PCIe Gigabit Ethernet> port 0xee00-0xeeff mem 0xfddff000-0xfddfffff irq 19 at device 0.0 on pci3
re1: Using 1 MSI messages
re1: Chip rev. 0x38000000
re1: MAC rev. 0x00000000
miibus1: <MII bus> on re1
rgephy1: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus1
rgephy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re1: Ethernet address: 00:1a:4d:5b:bf:24
re1: [FILTER]
pcib4: <PCI-PCI bridge> at device 9.0 on pci0
pci4: <PCI bus> on pcib4
atapci0: <JMicron AHCI controller> port 0xdf00-0xdf07,0xde00-0xde03,0xdd00-0xdd07,0xdc00-0xdc03,0xdb00-0xdb0f mem 0xfdbfe000-0xfdbfffff irq 17 at device 0.0 on pci4
atapci0: [ITHREAD]
atapci0: AHCI Version 01.00 controller with 2 ports PM supported
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
pcib5: <PCI-PCI bridge> at device 10.0 on pci0
pci5: <PCI bus> on pcib5
atapci1: <JMicron AHCI controller> port 0xcf00-0xcf07,0xce00-0xce03,0xcd00-0xcd07,0xcc00-0xcc03,0xcb00-0xcb0f mem 0xfd9fe000-0xfd9fffff irq 18 at device 0.0 on pci5
atapci1: [ITHREAD]
atapci1: AHCI Version 01.00 controller with 2 ports PM supported
ata4: <ATA channel 0> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci1
ata5: [ITHREAD]
atapci2: <ATI AHCI controller> port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem 0xfe02f000-0xfe02f3ff irq 22 at device 18.0 on pci0
atapci2: [ITHREAD]
atapci2: AHCI Version 01.10 controller with 4 ports PM supported
ata6: <ATA channel 0> on atapci2
ata6: port is not ready (timeout 1000ms)
ata6: software reset clear timeout
ata6: [ITHREAD]
ata7: <ATA channel 1> on atapci2
ata7: port is not ready (timeout 1000ms)
ata7: software reset clear timeout
ata7: [ITHREAD]
ata8: <ATA channel 2> on atapci2
ata8: port is not ready (timeout 1000ms)
ata8: software reset clear timeout
ata8: [ITHREAD]
ata9: <ATA channel 3> on atapci2
ata9: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xfe02e000-0xfe02efff irq 16 at device 19.0 on pci0
ohci0: [ITHREAD]
usbus0: <OHCI (generic) USB controller> on ohci0
ohci1: <OHCI (generic) USB controller> mem 0xfe02d000-0xfe02dfff irq 17 at device 19.1 on pci0
ohci1: [ITHREAD]
usbus1: <OHCI (generic) USB controller> on ohci1
ohci2: <OHCI (generic) USB controller> mem 0xfe02c000-0xfe02cfff irq 18 at device 19.2 on pci0
ohci2: [ITHREAD]
usbus2: <OHCI (generic) USB controller> on ohci2
ohci3: <OHCI (generic) USB controller> mem 0xfe02b000-0xfe02bfff irq 17 at device 19.3 on pci0
ohci3: [ITHREAD]
usbus3: <OHCI (generic) USB controller> on ohci3
ohci4: <OHCI (generic) USB controller> mem 0xfe02a000-0xfe02afff irq 18 at device 19.4 on pci0
ohci4: [ITHREAD]
usbus4: <OHCI (generic) USB controller> on ohci4
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe029000-0xfe0290ff irq 19 at device 19.5 on pci0
ehci0: [ITHREAD]
usbus5: EHCI version 1.0
usbus5: <EHCI (generic) USB 2.0 controller> on ehci0
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci3: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf900-0xf90f at device 20.1 on pci0
ata0: <ATA channel 0> on atapci3
ata0: [ITHREAD]
hdac0: <ATI SB600 High Definition Audio Controller> mem 0xfe024000-0xfe027fff irq 16 at device 20.2 on pci0
hdac0: HDA Driver Revision: 20090226_0129
hdac0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib6: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci6: <ACPI PCI bus> on pcib6
fwohci0: <Texas Instruments TSB43AB23> mem 0xfd7ff000-0xfd7ff7ff,0xfd7f8000-0xfd7fbfff irq 22 at device 14.0 on pci6
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:cc:72:3b:00:00:1a:4d
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x1598000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:cc:72:00:1a:4d
fwe0: Ethernet address: 02:cc:72:00:1a:4d
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:cc:72:3b:00:00:1a:4d _at_ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 on acpi0
uart0: [FILTER]
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
atrtc0: <AT realtime clock> port 0x70-0x73 irq 8 on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: HPET never increments, disabling
device_attach: acpi_hpet0 attach returned 6
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd2fff,0xd3000-0xd5fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0)  (me) 
firewire0: bus manager 0 
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
ugen0.1: <ATI> at usbus0
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <ATI> at usbus1
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <ATI> at usbus2
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <ATI> at usbus3
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <ATI> at usbus4
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <ATI> at usbus5
uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
acd0: DVDR <PIONEER DVD-RW DVR-212D/1.21> at ata6-master SATA150
ad14: 953868MB <WDC WD10EACS-00ZJB0 01.01B01> at ata7-master SATA300
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
ad16: 476938MB <Hitachi HDP725050GLA360 GM4OA52A> at ata8-master SATA300
hdac0: HDA Codec #3: Realtek ALC885
pcm0: <HDA Realtek ALC885 PCM #0 Analog> at cad 3 nid 1 on hdac0
pcm1: <HDA Realtek ALC885 PCM #1 Analog> at cad 3 nid 1 on hdac0
pcm2: <HDA Realtek ALC885 PCM #2 Digital> at cad 3 nid 1 on hdac0
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x48 0x00 0x01
uhub5: 10 ports with 10 removable, self powered
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
cd0 at ata0 bus 0 target 0 lun 0
cd0: <PIONEER DVD-RW  DVR-212D 1.21> Removable CD-ROM SCSI-0 device 
cd0: 3.300MB/s transfers
cd0: cd present [278850 x 2048 byte records]
ugen5.2: <Generic> at usbus5
umass0: <Bulk-In, Bulk-Out, Interface> on usbus5
umass0:  SCSI over Bulk-Only; quirks = 0x0000
usb2_alloc_device:1478: set address 2 failed (ignored)
umass0:4:0:-1: Attached to scbus4
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): NOT READY asc:3a,0
(probe0:umass-sim0:0:0:0): Medium not present
(probe0:umass-sim0:0:0:0): Unretryable error
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic 2.0 Reader-CF 1.00> Removable Direct Access SCSI-0 device 
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
usb2_alloc_device:1514: getting device descriptor at addr 2 failed!
(probe0:umass-sim0:0:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0 
(probe0:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:1): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:1): NOT READY asc:3a,0
(probe0:umass-sim0:0:0:1): Medium not present
(probe0:umass-sim0:0:0:1): Unretryable error
da1 at umass-sim0 bus 0 target 0 lun 1
da1: <Generic 2.0 Reader-Multi 1.00> Removable Direct Access SCSI-0 device 
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
usb2_req_re_enumerate:1414: addr=2, set address failed! (ignored)
usb2_req_re_enumerate:1427: getting device descriptor at addr 2 failed!
GEOM: ad14s1: geometry does not match label (255h,63s != 16h,63s).
GEOM: ad16s1: geometry does not match label (255h,63s != 16h,63s).
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 
(cd0:ata0:0:0:0): READ(10). CDB: 28 0 0 4 41 41 0 0 1 0 
(cd0:ata0:0:0:0): CAM Status: SCSI Status Error
(cd0:ata0:0:0:0): SCSI Status: Check Condition
(cd0:ata0:0:0:0): ILLEGAL REQUEST asc:64,0
(cd0:ata0:0:0:0): Illegal mode for this track
(cd0:ata0:0:0:0): Unretryable error
(cd0:ata0:0:0:0): cddone: got error 0x6 back
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 
(cd0:ata0:0:0:0): READ(10). CDB: 28 0 0 0 0 20 0 0 4 0 
(cd0:ata0:0:0:0): CAM Status: SCSI Status Error
(cd0:ata0:0:0:0): SCSI Status: Check Condition
(cd0:ata0:0:0:0): ILLEGAL REQUEST asc:64,0
(cd0:ata0:0:0:0): Illegal mode for this track
(cd0:ata0:0:0:0): Unretryable error
(cd0:ata0:0:0:0): cddone: got error 0x6 back
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 
(cd0:ata0:0:0:0): READ(10). CDB: 28 0 0 0 0 4 0 0 4 0 
(cd0:ata0:0:0:0): CAM Status: SCSI Status Error
(cd0:ata0:0:0:0): SCSI Status: Check Condition
(cd0:ata0:0:0:0): ILLEGAL REQUEST asc:64,0
(cd0:ata0:0:0:0): Illegal mode for this track
(cd0:ata0:0:0:0): Unretryable error
(cd0:ata0:0:0:0): cddone: got error 0x6 back
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 
(cd0:ata0:0:0:0): READ(10). CDB: 28 0 0 0 0 0 0 0 4 0 
(cd0:ata0:0:0:0): CAM Status: SCSI Status Error
(cd0:ata0:0:0:0): SCSI Status: Check Condition
(cd0:ata0:0:0:0): ILLEGAL REQUEST asc:64,0
(cd0:ata0:0:0:0): Illegal mode for this track
(cd0:ata0:0:0:0): Unretryable error
(cd0:ata0:0:0:0): cddone: got error 0x6 back
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 
(cd0:ata0:0:0:0): READ(10). CDB: 28 0 0 0 0 80 0 0 4 0 
(cd0:ata0:0:0:0): CAM Status: SCSI Status Error
(cd0:ata0:0:0:0): SCSI Status: Check Condition
(cd0:ata0:0:0:0): ILLEGAL REQUEST asc:64,0
(cd0:ata0:0:0:0): Illegal mode for this track
(cd0:ata0:0:0:0): Unretryable error
(cd0:ata0:0:0:0): cddone: got error 0x6 back
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 
(cd0:ata0:0:0:0): READ(10). CDB: 28 0 0 0 0 10 0 0 1 0 
(cd0:ata0:0:0:0): CAM Status: SCSI Status Error
(cd0:ata0:0:0:0): SCSI Status: Check Condition
(cd0:ata0:0:0:0): ILLEGAL REQUEST asc:64,0
(cd0:ata0:0:0:0): Illegal mode for this track
(cd0:ata0:0:0:0): Unretryable error
(cd0:ata0:0:0:0): cddone: got error 0x6 back
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 
(cd0:ata0:0:0:0): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0 
(cd0:ata0:0:0:0): CAM Status: SCSI Status Error
(cd0:ata0:0:0:0): SCSI Status: Check Condition
(cd0:ata0:0:0:0): ILLEGAL REQUEST asc:64,0
(cd0:ata0:0:0:0): Illegal mode for this track
(cd0:ata0:0:0:0): Unretryable error
(cd0:ata0:0:0:0): cddone: got error 0x6 back
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 
(cd0:ata0:0:0:0): READ(10). CDB: 28 0 0 0 0 4 0 0 1 0 
(cd0:ata0:0:0:0): CAM Status: SCSI Status Error
(cd0:ata0:0:0:0): SCSI Status: Check Condition
(cd0:ata0:0:0:0): ILLEGAL REQUEST asc:64,0
(cd0:ata0:0:0:0): Illegal mode for this track
(cd0:ata0:0:0:0): Unretryable error
(cd0:ata0:0:0:0): cddone: got error 0x6 back
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 
(cd0:ata0:0:0:0): READ(10). CDB: 28 0 0 0 0 20 0 0 1 0 
(cd0:ata0:0:0:0): CAM Status: SCSI Status Error
(cd0:ata0:0:0:0): SCSI Status: Check Condition
(cd0:ata0:0:0:0): ILLEGAL REQUEST asc:64,0
(cd0:ata0:0:0:0): Illegal mode for this track
(cd0:ata0:0:0:0): Unretryable error
(cd0:ata0:0:0:0): cddone: got error 0x6 back
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 
(cd0:ata0:0:0:0): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0 
(cd0:ata0:0:0:0): CAM Status: SCSI Status Error
(cd0:ata0:0:0:0): SCSI Status: Check Condition
(cd0:ata0:0:0:0): ILLEGAL REQUEST asc:64,0
(cd0:ata0:0:0:0): Illegal mode for this track
(cd0:ata0:0:0:0): Unretryable error
(cd0:ata0:0:0:0): cddone: got error 0x6 back
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 
(cd0:ata0:0:0:0): READ(10). CDB: 28 0 0 0 0 1 0 0 1 0 
(cd0:ata0:0:0:0): CAM Status: SCSI Status Error
(cd0:ata0:0:0:0): SCSI Status: Check Condition
(cd0:ata0:0:0:0): ILLEGAL REQUEST asc:64,0
(cd0:ata0:0:0:0): Illegal mode for this track
(cd0:ata0:0:0:0): Unretryable error
(cd0:ata0:0:0:0): cddone: got error 0x6 back
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 
(cd0:ata0:0:0:0): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0 
(cd0:ata0:0:0:0): CAM Status: SCSI Status Error
(cd0:ata0:0:0:0): SCSI Status: Check Condition
(cd0:ata0:0:0:0): ILLEGAL REQUEST asc:64,0
(cd0:ata0:0:0:0): Illegal mode for this track
(cd0:ata0:0:0:0): Unretryable error
(cd0:ata0:0:0:0): cddone: got error 0x6 back
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 
(cd0:ata0:0:0:0): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0 
(cd0:ata0:0:0:0): CAM Status: SCSI Status Error
(cd0:ata0:0:0:0): SCSI Status: Check Condition
(cd0:ata0:0:0:0): ILLEGAL REQUEST asc:64,0
(cd0:ata0:0:0:0): Illegal mode for this track
(cd0:ata0:0:0:0): Unretryable error
(cd0:ata0:0:0:0): cddone: got error 0x6 back
Trying to mount root from ufs:/dev/ad14s1a
usb2_req_re_enumerate:1414: addr=2, set address failed! (ignored)
usb2_req_re_enumerate:1427: getting device descriptor at addr 2 failed!
ugen0.2: <> at usbus0 (disconnected)
uhub_reattach_port:414: could not allocate new device!
re0: link state changed to UP
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8