On Sat, Mar 21, 2009 at 05:49:28PM -0400, Mike Tancsa wrote: > At 01:51 PM 3/21/2009, Alexander Motin wrote: > >Mike Tancsa wrote: > >> I turned it on, but still no luck. Attached is the verbose > >>dmesg.boot. I wonder if the extra controller is being > >>mis-identified as being PATA ? As far as I can tell, there are no > >>legacy PATA connectors on the board > >>Yet > >>atapci0: <Marvell 88SX6121 UDMA133 controller> port > >>0x2018-0x201f,0x2024-0x2027,0x2010-0x2017,0x2020-0x2023,0x2000-0x200 > >>f mem 0xe1100000-0xe11003ff irq 16 at device 0.0 on pci6 > >>implies its a PATA device ? > > > >It is or PATA controller, or SATA in legacy emulation mode. As I can > >see on web, there are also AHCI capable SATA channels present on this chip: > >http://lists.laptop.org/pipermail/server-devel/2007-July/000070.html > >How it is reported in pciconf? May be there is some way to make AHCI > >attach it? Isn't there any options about it's operation in BIOS? > > Nothing in the BIOS for the eSATA port other than "IDE/RAID" or > "enable/disable". Its set to IDE and enabled. > > >Don't you have any datasheet for this device? > > No, its just a generic Intel branded board (Intel DX58SO) > > >Also a bit strange for me this messages: > >ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 > >ata0: reset tp1 mask=00 ostat0=ff ostat1=ff > >ata0: [MPSAFE] > >ata0: [ITHREAD] > >ata1 at port 0x170-0x177,0x376 irq 15 on isa0 > >ata1: reset tp1 mask=00 ostat0=ff ostat1=ff > >ata1: [MPSAFE] > >ata1: [ITHREAD] > >channels 0 and 1 are legacy ATA channels. A bit strange to see them > >when AFAIK there is no PATA support on ICH10. If it is not a parts > >of Marvell, then I have no idea what is this. > > Interesting, pciconf shows it as sata > > 0[i7]# pciconf -lvc > hostb0_at_pci0:0:0:0: class=0x060000 card=0x4f538086 > chip=0x34058086 rev=0x12 hdr=0x00 > vendor = 'Intel Corporation' > class = bridge > subclass = HOST-PCI > cap 00[40] = unknown > pcib1_at_pci0:0:1:0: class=0x060400 card=0x4f538086 > chip=0x34088086 rev=0x12 hdr=0x01 > vendor = 'Intel Corporation' > class = bridge > subclass = PCI-PCI > cap 0d[40] = PCI Bridge card=0x4f538086 > cap 05[60] = MSI supports 2 messages, vector masks > cap 10[90] = PCI-Express 2 root port > cap 01[e0] = powerspec 3 supports D0 D3 current D0 > pcib2_at_pci0:0:3:0: class=0x060400 card=0x4f538086 > chip=0x340a8086 rev=0x12 hdr=0x01 > vendor = 'Intel Corporation' > class = bridge > subclass = PCI-PCI > cap 0d[40] = PCI Bridge card=0x4f538086 > cap 05[60] = MSI supports 2 messages, vector masks > cap 10[90] = PCI-Express 2 root port > cap 01[e0] = powerspec 3 supports D0 D3 current D0 > pcib3_at_pci0:0:7:0: class=0x060400 card=0x4f538086 > chip=0x340e8086 rev=0x12 hdr=0x01 > vendor = 'Intel Corporation' > class = bridge > subclass = PCI-PCI > cap 0d[40] = PCI Bridge card=0x4f538086 > cap 05[60] = MSI supports 2 messages, vector masks > cap 10[90] = PCI-Express 2 root port > cap 01[e0] = powerspec 3 supports D0 D3 current D0 > none0_at_pci0:0:16:0: class=0x080000 card=0x00000000 > chip=0x34258086 rev=0x12 hdr=0x00 > vendor = 'Intel Corporation' > class = base peripheral > subclass = interrupt controller > cap 09[50] = vendor (length 255) Intel cap 15 version 0 > none1_at_pci0:0:16:1: class=0x080000 card=0x00000000 > chip=0x34268086 rev=0x12 hdr=0x00 > vendor = 'Intel Corporation' > class = base peripheral > subclass = interrupt controller > none2_at_pci0:0:20:0: class=0x080000 card=0x00000000 > chip=0x342e8086 rev=0x12 hdr=0x00 > vendor = 'Intel Corporation' > class = base peripheral > subclass = interrupt controller > cap 10[40] = PCI-Express 2 type 0 > none3_at_pci0:0:20:1: class=0x080000 card=0x00000000 > chip=0x34228086 rev=0x12 hdr=0x00 > vendor = 'Intel Corporation' > class = base peripheral > subclass = interrupt controller > cap 10[40] = PCI-Express 2 type 0 > none4_at_pci0:0:20:2: class=0x080000 card=0x00000000 > chip=0x34238086 rev=0x12 hdr=0x00 > vendor = 'Intel Corporation' > class = base peripheral > subclass = interrupt controller > cap 10[40] = PCI-Express 2 type 0 > none5_at_pci0:0:20:3: class=0x080000 card=0x00000000 > chip=0x34388086 rev=0x12 hdr=0x00 > vendor = 'Intel Corporation' > class = base peripheral > subclass = interrupt controller > em1_at_pci0:0:25:0: class=0x020000 card=0x00008086 > chip=0x10cc8086 rev=0x00 hdr=0x00 > vendor = 'Intel Corporation' > class = network > subclass = ethernet > cap 01[c8] = powerspec 2 supports D0 D3 current D0 > cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message > uhci0_at_pci0:0:26:0: class=0x0c0300 card=0x4f538086 > chip=0x3a378086 rev=0x00 hdr=0x00 > vendor = 'Intel Corporation' > class = serial bus > subclass = USB > cap 13[50] = PCI Advanced Features: FLR TP > uhci1_at_pci0:0:26:1: class=0x0c0300 card=0x4f538086 > chip=0x3a388086 rev=0x00 hdr=0x00 > vendor = 'Intel Corporation' > class = serial bus > subclass = USB > cap 13[50] = PCI Advanced Features: FLR TP > uhci2_at_pci0:0:26:2: class=0x0c0300 card=0x4f538086 > chip=0x3a398086 rev=0x00 hdr=0x00 > vendor = 'Intel Corporation' > class = serial bus > subclass = USB > cap 13[50] = PCI Advanced Features: FLR TP > ehci0_at_pci0:0:26:7: class=0x0c0320 card=0x4f538086 > chip=0x3a3c8086 rev=0x00 hdr=0x00 > vendor = 'Intel Corporation' > class = serial bus > subclass = USB > cap 01[50] = powerspec 2 supports D0 D3 current D0 > cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14 > pcib4_at_pci0:0:28:0: class=0x060400 card=0x00000000 > chip=0x3a408086 rev=0x00 hdr=0x01 > vendor = 'Intel Corporation' > class = bridge > subclass = PCI-PCI > cap 10[40] = PCI-Express 1 root port > cap 05[80] = MSI supports 1 message > cap 0d[90] = PCI Bridge card=0x00000000 > cap 01[a0] = powerspec 2 supports D0 D3 current D0 > pcib5_at_pci0:0:28:1: class=0x060400 card=0x00000000 > chip=0x3a428086 rev=0x00 hdr=0x01 > vendor = 'Intel Corporation' > class = bridge > subclass = PCI-PCI > cap 10[40] = PCI-Express 1 root port > cap 05[80] = MSI supports 1 message > cap 0d[90] = PCI Bridge card=0x00000000 > cap 01[a0] = powerspec 2 supports D0 D3 current D0 > pcib6_at_pci0:0:28:4: class=0x060400 card=0x00000000 > chip=0x3a488086 rev=0x00 hdr=0x01 > vendor = 'Intel Corporation' > class = bridge > subclass = PCI-PCI > cap 10[40] = PCI-Express 1 root port > cap 05[80] = MSI supports 1 message > cap 0d[90] = PCI Bridge card=0x00000000 > cap 01[a0] = powerspec 2 supports D0 D3 current D0 > uhci3_at_pci0:0:29:0: class=0x0c0300 card=0x4f538086 > chip=0x3a348086 rev=0x00 hdr=0x00 > vendor = 'Intel Corporation' > class = serial bus > subclass = USB > cap 13[50] = PCI Advanced Features: FLR TP > uhci4_at_pci0:0:29:1: class=0x0c0300 card=0x4f538086 > chip=0x3a358086 rev=0x00 hdr=0x00 > vendor = 'Intel Corporation' > class = serial bus > subclass = USB > cap 13[50] = PCI Advanced Features: FLR TP > uhci5_at_pci0:0:29:2: class=0x0c0300 card=0x4f538086 > chip=0x3a368086 rev=0x00 hdr=0x00 > vendor = 'Intel Corporation' > class = serial bus > subclass = USB > cap 13[50] = PCI Advanced Features: FLR TP > ehci1_at_pci0:0:29:7: class=0x0c0320 card=0x4f538086 > chip=0x3a3a8086 rev=0x00 hdr=0x00 > vendor = 'Intel Corporation' > class = serial bus > subclass = USB > cap 01[50] = powerspec 2 supports D0 D3 current D0 > cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14 > pcib7_at_pci0:0:30:0: class=0x060401 card=0x4f538086 > chip=0x244e8086 rev=0x90 hdr=0x01 > vendor = 'Intel Corporation' > device = '82801 Family (ICH2/3/4/4/5/5/6/7/8/9,63xxESB) Hub > Interface to PCI Bridge' > class = bridge > subclass = PCI-PCI > cap 0d[50] = PCI Bridge card=0x4f538086 > isab0_at_pci0:0:31:0: class=0x060100 card=0x4f538086 > chip=0x3a168086 rev=0x00 hdr=0x00 > vendor = 'Intel Corporation' > class = bridge > subclass = PCI-ISA > cap 09[e0] = vendor (length 12) Intel cap 1 version 0 > features: SATA RAID-5, 4 PCI-e x1 slots > atapci1_at_pci0:0:31:2: class=0x010601 card=0x4f538086 > chip=0x3a228086 rev=0x00 hdr=0x00 > vendor = 'Intel Corporation' > class = mass storage > subclass = SATA > cap 05[80] = MSI supports 16 messages > cap 01[70] = powerspec 3 supports D0 D3 current D0 > cap 12[a8] = SATA Index-Data Pair > none6_at_pci0:0:31:3: class=0x0c0500 card=0x4f538086 > chip=0x3a308086 rev=0x00 hdr=0x00 > vendor = 'Intel Corporation' > class = serial bus > subclass = SMBus > em0_at_pci0:1:0:0: class=0x020000 card=0x10838086 chip=0x10b98086 > rev=0x06 hdr=0x00 > vendor = 'Intel Corporation' > device = '82572EI PRO/1000 PT Desktop Adapter (Copper)' > class = network > subclass = ethernet > cap 01[c8] = powerspec 2 supports D0 D3 current D0 > cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message > cap 10[e0] = PCI-Express 1 endpoint > atapci0_at_pci0:6:0:0: class=0x01018f card=0x4f538086 > chip=0x612111ab rev=0xb2 hdr=0x00 > vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)' > device = '6121 SATA2 Controller' > class = mass storage > subclass = ATA > cap 01[48] = powerspec 2 supports D0 D1 D3 current D0 > cap 05[50] = MSI supports 1 message > cap 10[e0] = PCI-Express 1 legacy endpoint > vgapci0_at_pci0:7:2:0: class=0x030000 card=0x00081002 > chip=0x474d1002 rev=0x65 hdr=0x00 > vendor = 'ATI Technologies Inc' > device = 'Rage XL AGP 2x SLAT' > class = display > subclass = VGA > cap 01[5c] = powerspec 1 supports D0 D1 D2 D3 current D0 > fwohci0_at_pci0:7:3:0: class=0x0c0010 card=0x4f538086 > chip=0x8023104c rev=0x00 hdr=0x00 > vendor = 'Texas Instruments (TI)' > device = 'TSB43AB21/A IEEE1394a-2000 OHCI PHY/Link-Layer Ctrlr' > class = serial bus > subclass = FireWire > cap 01[44] = powerspec 2 supports D0 D1 D2 D3 current D0 > 0[i7]# I would try to run it as RAID, as per the technical product spec from Intel it supports running single non-raid configs. -- Regards, Ulf. --------------------------------------------------------------------- Ulf Zimmermann, 1525 Pacific Ave., Alameda, CA-94501, #: 510-865-0204 You can find my resume at: http://www.Alameda.net/~ulf/resume.htmlReceived on Sat Mar 21 2009 - 21:21:17 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:44 UTC