Re: single SATA disk and yet identified as 'ad4'

From: Boris Kochergin <spawk_at_acm.poly.edu>
Date: Mon, 11 May 2009 10:16:54 -0400
By default, ATA disks are assigned numbers based on the ATA controller 
they are on, and whether they are primary or secondary on the 
controller. For example, the primary disk on the first controller would 
be ad0, the secondary disk on the first controller would be ad1, the 
primary disk on the second controller would be ad2, etc. This is the 
ATA_STATIC_ID kernel option. I expect that there are two ATA controllers 
before the one your disk is on. You may confirm this by running 
"atacontrol list".

-Boris

Saifi Khan wrote:
> Hi all:
>
> The system has just one SATA disk and yet bootloader process
> identified it as 'ad4'. Ideally, it should be ad1.
>
> Here is the PCI information
>
> 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
> 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
> 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
> 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
> 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
> 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 01)
> 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)
> 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01)
> 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01)
> 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
> 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
> 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01)
> 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
> 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 01)
> 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
> 06:00.0 Network controller: Broadcom Corporation BCM94311MCG wlan mini-PCI (rev 01)
> 08:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
>
> How does the labelling logic work ? 
>
>
> thanks
> Saifi.
> _______________________________________________
> freebsd-current_at_freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org"
>   
Received on Mon May 11 2009 - 12:44:50 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:47 UTC