Building boot2 for ixp425

From: Jon Loeliger <jdl_at_jdl.com>
Date: Wed, 13 May 2009 11:49:41 -0500
Folks,

I'm following the instructions on the Wiki here:

    http://wiki.freebsd.org/FreeBSDAvila

After successfully building FreeBSD current using nanobsd
and placing it onto a Compact Flash, I am now trying to
build the boot2 image so that I can boot it.

The instructions say:

    Build a kernel configured to mount the file system from ad0. This is
    most easily done by copying the AVILA config file and stripping out
    the BOOTP* options.

Which I did, placing a new "BOOT2" config file in /usr/src/sys/arm/conf.

Then:

    Build the second level bootstrap program by entering the arm/xscale
    build environment and building sys/boot2/ixdp425:

         make TARGET_ARCH=arm TARGET_CPUTYPE=xscale \
                              TARGET_BIG_ENDIAN=true buildenv
         cd sys/boot/arm/ixp425/boot2/
         make

The problem arises from that make:

    # make
    Warning: Object directory not changed from original /usr/src/sys/boot/arm/ixp425/boot2
    cc -O -pipe -mbig-endian -march=armv5te -D__XSCALE__ -DBOOT_STACK=0x200000-4  -I/usr/src/sys/boot/arm/ixp425/boot2/../../../common  -I/usr/src/sys/boot/arm/ixp425/boot2 -DFIXUP_BOOT_DRV -Os -ffreestanding  -I/usr/src/sys/boot/arm/ixp425/boot2/../../../..  -I/usr/src/sys/boot/arm/ixp425/boot2/../../../../arm  -DCPU_XSCALE_IXP425  -Wall -Waggregate-return   -Werror  -Wnested-externs  -Wpointer-arith -Wshadow -Wwrite-strings  -Wmissing-prototypes  -Wmissing-declarations -DBOOT_IXP425 -std=gnu99  -c arm_init.S
    cc1: error: unrecognized command line option "-mbig-endian"
    arm_init.S:0: error: bad value (armv5te) for -march= switch
    arm_init.S:0: error: bad value (armv5te) for -mtune= switch
    *** Error code 1

    Stop in /usr/src/sys/boot/arm/ixp425/boot2.

Any advice for the weary here?  If I just strip the three
offending flags from the Makefile, will it build properly?
I'm dubious, except that there are also these in the environment now:

    TARGET_CPUTYPE=xscale
    CPUTYPE=xscale
    TARGET_BIG_ENDIAN=true
    MACHINE_ARCH=arm
    MAKEOBJDIRPREFIX=/usr/obj/arm
    MAKEFLAGS= TARGET_ARCH=arm TARGET_CPUTYPE=xscale TARGET_BIG_ENDIAN=true -m /usr/src/share/mk

Thanks,
jdl
Received on Wed May 13 2009 - 14:49:42 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:47 UTC