On Wed, May 13, 2009 at 11:49:41AM -0500, Jon Loeliger wrote: > > Folks, > > I'm following the instructions on the Wiki here: > > http://wiki.freebsd.org/FreeBSDAvila > > After successfully building FreeBSD current using nanobsd > and placing it onto a Compact Flash, I am now trying to > build the boot2 image so that I can boot it. > > The instructions say: > > Build a kernel configured to mount the file system from ad0. This is > most easily done by copying the AVILA config file and stripping out > the BOOTP* options. > > Which I did, placing a new "BOOT2" config file in /usr/src/sys/arm/conf. > > Then: > > Build the second level bootstrap program by entering the arm/xscale > build environment and building sys/boot2/ixdp425: > > make TARGET_ARCH=arm TARGET_CPUTYPE=xscale \ > TARGET_BIG_ENDIAN=true buildenv > cd sys/boot/arm/ixp425/boot2/ > make > > The problem arises from that make: > > # make > Warning: Object directory not changed from original /usr/src/sys/boot/arm/ixp425/boot2 > cc -O -pipe -mbig-endian -march=armv5te -D__XSCALE__ -DBOOT_STACK=0x200000-4 -I/usr/src/sys/boot/arm/ixp425/boot2/../../../common -I/usr/src/sys/boot/arm/ixp425/boot2 -DFIXUP_BOOT_DRV -Os -ffreestanding -I/usr/src/sys/boot/arm/ixp425/boot2/../../../.. -I/usr/src/sys/boot/arm/ixp425/boot2/../../../../arm -DCPU_XSCALE_IXP425 -Wall -Waggregate-return -Werror -Wnested-externs -Wpointer-arith -Wshadow -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -DBOOT_IXP425 -std=gnu99 -c arm_init.S > cc1: error: unrecognized command line option "-mbig-endian" > arm_init.S:0: error: bad value (armv5te) for -march= switch > arm_init.S:0: error: bad value (armv5te) for -mtune= switch > *** Error code 1 > > Stop in /usr/src/sys/boot/arm/ixp425/boot2. Are you sure your cross compile toolchain is built? make TARGET_ARCH=arm TARGET_CPUTYPE=xscale \ TARGET_BIG_ENDIAN=true kernel-toolchain AndrewReceived on Wed May 13 2009 - 15:00:40 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:47 UTC