dummynet issues

From: Kevin Smith <kerbzo_at_gmail.com>
Date: Sun, 29 Nov 2009 16:55:12 +0100
Hi,

I'm experiencing some dummynet issues after upgrading from 7-STABLE to
8.0-RELEASE.
My /var/log/messages is full of these logs:

Nov 29 15:34:18 stone kernel: dummynet: OUCH! pipe should have been idle!
Nov 29 15:34:49 stone last message repeated 409 times
Nov 29 15:36:49 stone last message repeated 1595 times
Nov 29 15:46:50 stone last message repeated 8162 times
Nov 29 15:56:51 stone last message repeated 7099 times
Nov 29 16:06:52 stone last message repeated 4771 times
Nov 29 16:16:53 stone last message repeated 3859 times
Nov 29 16:26:54 stone last message repeated 3493 times
Nov 29 16:36:55 stone last message repeated 5874 times

Also I noticed that traffic shaping is not working any longer , i.e.:
actually outgoing pipes do not limit bandwidth at all.
Until 8 Release upgrading the same configuration was working perfectly.

This is my uname -a

FreeBSD stone.it 8.0-RELEASE FreeBSD 8.0-RELEASE #5: Sat Nov 28 20:22:30
CET 2009     kevin_at_stone.it:/usr/obj/usr/src/sys/STONE  i386

Attached my dmesg.boot and my kernel configuration.

Is anybody experiencing same issues?
Thank you,
regards,

--
Kevin

Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-RELEASE #5: Sat Nov 28 20:22:30 CET 2009
    tinotom_at_stone.it:/usr/obj/usr/src/sys/STONE
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: VIA Eden Processor 1200MHz (1200.01-MHz 686-class CPU)
  Origin = "CentaurHauls"  Id = 0x6d0  Stepping = 0
  Features=0xa7c9baff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,APIC,SEP,MTRR,PGE,CMOV,PAT,CLFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
  Features2=0x4181<SSE3,EST,TM2,xTPR>
  VIA Padlock Features=0xffcc<RNG,AES,AES-CTR,SHA1,SHA256,RSA>
real memory  = 1073741824 (1024 MB)
avail memory = 975413248 (930 MB)
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
padlock0: <AES-CBC,SHA1,SHA256> on motherboard
acpi0: <CN700 AWRDACPI> on motherboard
acpi0: [ITHREAD]
ACPI Error: Package List length (8) larger than NumElements count (2), truncated
 20090521 dsobject-590
ACPI Error: Package List length (8) larger than NumElements count (2), truncated
 20090521 dsobject-590
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 3bde0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci_link2: BIOS IRQ 5 for 0.9.INTA is invalid
pci_link2: BIOS IRQ 5 for 0.16.INTC is invalid
pci_link2: BIOS IRQ 5 for 0.17.INTC is invalid
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 3314 (P4M800CE) host to PCI bridge> on hostb0
agp0: aperture size is 32M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vgapci0: <VGA-compatible display> mem 0xf4000000-0xf7ffffff,0xfb000000-0xfbffffff irq 11 at device 0.0 on pci1
atapci0: <VIA 6421 SATA150 controller> port 0xff00-0xff0f,0xfe00-0xfe0f,0xfd00-0xfd0f,0xfc00-0xfc0f,0xfb00-0xfb1f,0xee00-0xeeff irq 11 at device 8.0 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
re0: <RealTek 8169SC/8110SC Single-chip Gigabit Ethernet> port 0xec00-0xecff mem 0xfdfff000-0xfdfff0ff irq 10 at device 9.0 on pci0
re0: Chip rev. 0x18000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: Ethernet address: 00:30:18:a3:3e:6e
re0: [FILTER]
re1: <RealTek 8169SC/8110SC Single-chip Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfdffe000-0xfdffe0ff irq 10 at device 11.0 on pci0
re1: Chip rev. 0x18000000
re1: MAC rev. 0x00000000
miibus1: <MII bus> on re1
rgephy1: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus1
rgephy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re1: Ethernet address: 00:30:18:a3:3e:6f
re1: [FILTER]
atapci1: <VIA 6420 SATA150 controller> port 0xfa00-0xfa07,0xf900-0xf903,0xf800-0xf807,0xf700-0xf703,0xf600-0xf60f,0xea00-0xeaff irq 11 at device 15.0 on pci0
atapci1: [ITHREAD]
ata5: <ATA channel 0> on atapci1
ata5: [ITHREAD]
ata6: <ATA channel 1> on atapci1
ata6: [ITHREAD]
atapci2: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf500-0xf50f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci2
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci2
ata1: [ITHREAD]
uhci0: <VIA 83C572 USB controller> port 0xf400-0xf41f irq 11 at device 16.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x0010
usbus0: <VIA 83C572 USB controller> on uhci0
uhci1: <VIA 83C572 USB controller> port 0xf300-0xf31f irq 11 at device 16.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x0010
usbus1: <VIA 83C572 USB controller> on uhci1
uhci2: <VIA 83C572 USB controller> port 0xf200-0xf21f irq 11 at device 16.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x0010
usbus2: <VIA 83C572 USB controller> on uhci2
uhci3: <VIA 83C572 USB controller> port 0xf100-0xf11f irq 11 at device 16.3 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x0010
usbus3: <VIA 83C572 USB controller> on uhci3
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xfdffd000-0xfdffd0ff irq 10 at device 16.4 on pci0
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: <VIA VT6202 USB 2.0 controller> on ehci0
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pci0: <multimedia, audio> at device 17.5 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x73 irq 8 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcf7ff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1200008037 Hz quality 800
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert enabled, nat loadable, rule-based forwarding disabled, default to accept, logging disabled
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ad0: 238475MB <MAXTOR STM3250620A 3.AAD> at ata0-master UDMA100
ugen0.1: <VIA> at usbus0
uhub0: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <VIA> at usbus1
uhub1: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <VIA> at usbus2
uhub2: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <VIA> at usbus3
uhub3: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <VIA> at usbus4
uhub4: <VIA EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ad1: 239372MB <Maxtor 6L250R0 BAH41G10> at ata0-slave UDMA133
ad4: 57231MB <Hitachi HTS721060G9SA00 MC3OC10H> at ata2-master SATA150
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
ad6: 476940MB <WDC WD5000AAKS-75TMA0 12.01C01> at ata3-master SATA150
ad10: 476940MB <Seagate ST3500320AS SD15> at ata5-master SATA150
GEOM: ad6s1: geometry does not match label (255h,63s != 16h,63s).
GEOM: ufsid/48f65a225aa70550: geometry does not match label (255h,63s != 16h,63s).
ad12: 1430799MB <Seagate ST31500341AS CC1H> at ata6-master SATA150
Root mount waiting for: usbus4
Root mount waiting for: usbus4
Root mount waiting for: usbus4
uhub4: 8 ports with 8 removable, self powered
Trying to mount root from ufs:/dev/ad12s1a
ugen0.2: <American Power Conversion> at usbus0
WARNING: attempt to domain_add(netgraph) after domainfinalize()
dummynet: OUCH! pipe should have been idle!
dummynet: OUCH! pipe should have been idle!
dummynet: OUCH! pipe should have been idle!
dummynet: OUCH! pipe should have been idle!

#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the config(5) manual page,
# and/or the handbook section on Kernel Configuration Files:
#
#    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.519.2.4.2.2 2009/11/09 23:48:01 kensmith Exp $

#cpu		I486_CPU
#cpu		I586_CPU
cpu		I686_CPU
ident		STONE

# To statically compile in device wiring instead of /boot/device.hints
#hints		"GENERIC.hints"		# Default places to look for devices.

# Use the following to compile in values accessible to the kernel
# through getenv() (or kenv(1) in userland). The format of the file
# is 'variable=value', see kenv(1)
#
# env		"GENERIC.env"

makeoptions	DEBUG=-g		# Build kernel with gdb(1) debug symbols

options 	SCHED_ULE		# ULE scheduler
#options 	PREEMPTION		# Enable kernel thread preemption
options 	INET			# InterNETworking
options 	INET6			# IPv6 communications protocols
options 	SCTP			# Stream Control Transmission Protocol
options 	FFS			# Berkeley Fast Filesystem
options 	SOFTUPDATES		# Enable FFS soft updates support
options 	UFS_ACL			# Support for access control lists
options 	UFS_DIRHASH		# Improve performance on big directories
options 	UFS_GJOURNAL		# Enable gjournal-based UFS journaling
options 	MD_ROOT			# MD is a potential root device
options 	NFSCLIENT		# Network Filesystem Client
options 	NFSSERVER		# Network Filesystem Server
options 	NFSLOCKD		# Network Lock Manager
options 	NFS_ROOT		# NFS usable as /, requires NFSCLIENT
options 	MSDOSFS			# MSDOS Filesystem
options 	CD9660			# ISO 9660 Filesystem
options 	PROCFS			# Process filesystem (requires PSEUDOFS)
options 	PSEUDOFS		# Pseudo-filesystem framework
options 	GEOM_PART_GPT		# GUID Partition Tables.
options 	GEOM_LABEL		# Provides labelization
options 	COMPAT_43TTY		# BSD 4.3 TTY compat (sgtty)
options 	COMPAT_FREEBSD4		# Compatible with FreeBSD4
options 	COMPAT_FREEBSD5		# Compatible with FreeBSD5
options 	COMPAT_FREEBSD6		# Compatible with FreeBSD6
options 	COMPAT_FREEBSD7		# Compatible with FreeBSD7
options 	SCSI_DELAY=1000		# Delay (in ms) before probing SCSI
options 	KTRACE			# ktrace(1) support
options 	STACK			# stack(9) support
options 	SYSVSHM			# SYSV-style shared memory
options 	SYSVMSG			# SYSV-style message queues
options 	SYSVSEM			# SYSV-style semaphores
options 	P1003_1B_SEMAPHORES	# POSIX-style semaphores
options 	_KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options 	PRINTF_BUFR_SIZE=128	# Prevent printf output being interspersed.
options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev
options 	HWPMC_HOOKS		# Necessary kernel hooks for hwpmc(4)
options 	AUDIT			# Security event auditing
options 	MAC			# TrustedBSD MAC Framework
options		FLOWTABLE		# per-cpu routing cache
#options 	KDTRACE_HOOKS		# Kernel DTrace hooks

# To make an SMP kernel, the next two lines are needed
#options 	SMP			# Symmetric MultiProcessor Kernel
#device		apic			# I/O APIC

# CPU frequency control
device		cpufreq

# Bus support.
device		acpi
device		eisa
device		pci

# Floppy drives
#device		fdc

# ATA and ATAPI devices
device		ata
device		atadisk		# ATA disk drives
device		ataraid		# ATA RAID drives
device		atapicd		# ATAPI CDROM drives
device		atapifd		# ATAPI floppy drives
device		atapist		# ATAPI tape drives
options 	ATA_STATIC_ID	# Static device numbering

# SCSI Controllers
#device		ahb		# EISA AHA1742 family
#device		ahc		# AHA2940 and onboard AIC7xxx devices
#options 	AHC_REG_PRETTY_PRINT	# Print register bitfields in debug
#					# output.  Adds ~128k to driver.
#device		ahd		# AHA39320/29320 and onboard AIC79xx devices
#options 	AHD_REG_PRETTY_PRINT	# Print register bitfields in debug
#					# output.  Adds ~215k to driver.
#device		amd		# AMD 53C974 (Tekram DC-390(T))
#device		hptiop		# Highpoint RocketRaid 3xxx series
#device		isp		# Qlogic family
##device		ispfw		# Firmware for QLogic HBAs- normally a module
#device		mpt		# LSI-Logic MPT-Fusion
##device		ncr		# NCR/Symbios Logic
#device		sym		# NCR/Symbios Logic (newer chipsets + those of `ncr')
#device		trm		# Tekram DC395U/UW/F DC315U adapters
#
#device		adv		# Advansys SCSI adapters
#device		adw		# Advansys wide SCSI adapters
#device		aha		# Adaptec 154x SCSI adapters
#device		aic		# Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
#device		bt		# Buslogic/Mylex MultiMaster SCSI adapters
#
#device		ncv		# NCR 53C500
#device		nsp		# Workbit Ninja SCSI-3
#device		stg		# TMC 18C30/18C50
#
# SCSI peripherals
device		scbus		# SCSI bus (required for SCSI)
device		ch		# SCSI media changers
device		da		# Direct Access (disks)
device		sa		# Sequential Access (tape etc)
device		cd		# CD
device		pass		# Passthrough device (direct SCSI access)
device		ses		# SCSI Environmental Services (and SAF-TE)

# RAID controllers interfaced to the SCSI subsystem
#device		amr		# AMI MegaRAID
#device		arcmsr		# Areca SATA II RAID
#device		asr		# DPT SmartRAID V, VI and Adaptec SCSI RAID
#device		ciss		# Compaq Smart RAID 5*
#device		dpt		# DPT Smartcache III, IV - See NOTES for options
#device		hptmv		# Highpoint RocketRAID 182x
#device		hptrr		# Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx
#device		iir		# Intel Integrated RAID
#device		ips		# IBM (Adaptec) ServeRAID
#device		mly		# Mylex AcceleRAID/eXtremeRAID
#device		twa		# 3ware 9000 series PATA/SATA RAID
#
## RAID controllers
#device		aac		# Adaptec FSA RAID
#device		aacp		# SCSI passthrough for aac (requires CAM)
#device		ida		# Compaq Smart RAID
#device		mfi		# LSI MegaRAID SAS
#device		mlx		# Mylex DAC960 family
#device		pst		# Promise Supertrak SX6000
#device		twe		# 3ware ATA RAID
#
# atkbdc0 controls both the keyboard and the PS/2 mouse
device		atkbdc		# AT keyboard controller
device		atkbd		# AT keyboard
device		psm		# PS/2 mouse

device		kbdmux		# keyboard multiplexer

device		vga		# VGA video card driver

device		splash		# Splash screen and screen saver support

# syscons is the default console driver, resembling an SCO console
device		sc

device		agp		# support several AGP chipsets

# Power management support (see NOTES for more options)
#device		apm
# Add suspend/resume support for the i8254.
device		pmtimer

# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
#device		cbb		# cardbus (yenta) bridge
#device		pccard		# PC Card (16-bit) bus
#device		cardbus		# CardBus (32-bit) bus
#
# Serial (COM) ports
device		uart		# Generic UART driver

# Parallel port
device		ppc
device		ppbus		# Parallel port bus (required)
device		lpt		# Printer
device		plip		# TCP/IP over parallel
device		ppi		# Parallel port interface device
#device		vpo		# Requires scbus and da

# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to sio, uart and/or ppc drivers):
#device		puc

# PCI Ethernet NICs.
#device		de		# DEC/Intel DC21x4x (``Tulip'')
#device		em		# Intel PRO/1000 Gigabit Ethernet Family
#device		igb		# Intel PRO/1000 PCIE Server Gigabit Family
#device		ixgb		# Intel PRO/10GbE Ethernet Card
#device		le		# AMD Am7900 LANCE and Am79C9xx PCnet
#device		ti		# Alteon Networks Tigon I/II gigabit Ethernet
#device		txp		# 3Com 3cR990 (``Typhoon'')
#device		vx		# 3Com 3c590, 3c595 (``Vortex'')

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device		miibus		# MII bus support
#device		ae		# Attansic/Atheros L2 FastEthernet
#device		age		# Attansic/Atheros L1 Gigabit Ethernet
#device		alc		# Atheros AR8131/AR8132 Ethernet
#device		ale		# Atheros AR8121/AR8113/AR8114 Ethernet
#device		bce		# Broadcom BCM5706/BCM5708 Gigabit Ethernet
#device		bfe		# Broadcom BCM440x 10/100 Ethernet
#device		bge		# Broadcom BCM570xx Gigabit Ethernet
#device		dc		# DEC/Intel 21143 and various workalikes
#device		et		# Agere ET1310 10/100/Gigabit Ethernet
#device		fxp		# Intel EtherExpress PRO/100B (82557, 82558)
#device		jme		# JMicron JMC250 Gigabit/JMC260 Fast Ethernet
#device		lge		# Level 1 LXT1001 gigabit Ethernet
#device		msk		# Marvell/SysKonnect Yukon II Gigabit Ethernet
#device		nfe		# nVidia nForce MCP on-board Ethernet
#device		nge		# NatSemi DP83820 gigabit Ethernet
#device		nve		# nVidia nForce MCP on-board Ethernet Networking
#device		pcn		# AMD Am79C97x PCI 10/100 (precedence over 'le')
device		re		# RealTek 8139C+/8169/8169S/8110S
#device		rl		# RealTek 8129/8139
#device		sf		# Adaptec AIC-6915 (``Starfire'')
#device		sis		# Silicon Integrated Systems SiS 900/SiS 7016
#device		sk		# SysKonnect SK-984x & SK-982x gigabit Ethernet
#device		ste		# Sundance ST201 (D-Link DFE-550TX)
#device		stge		# Sundance/Tamarack TC9021 gigabit Ethernet
#device		tl		# Texas Instruments ThunderLAN
#device		tx		# SMC EtherPower II (83c170 ``EPIC'')
#device		vge		# VIA VT612x gigabit Ethernet
#device		vr		# VIA Rhine, Rhine II
#device		wb		# Winbond W89C840F
#device		xl		# 3Com 3c90x (``Boomerang'', ``Cyclone'')

# ISA Ethernet NICs.  pccard NICs included.
#device		cs		# Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
#device		ed		# NE[12]000, SMC Ultra, 3c503, DS8390 cards
#device		ex		# Intel EtherExpress Pro/10 and Pro/10+
#device		ep		# Etherlink III based cards
#device		fe		# Fujitsu MB8696x based cards
#device		ie		# EtherExpress 8/16, 3C507, StarLAN 10 etc.
#device		sn		# SMC's 9000 series of Ethernet chips
#device		xe		# Xircom pccard Ethernet
#
# Wireless NIC cards
device		wlan		# 802.11 support
options 	IEEE80211_DEBUG	# enable debug msgs
options 	IEEE80211_AMPDU_AGE # age frames in AMPDU reorder q's
options 	IEEE80211_SUPPORT_MESH	# enable 802.11s draft support
device		wlan_wep	# 802.11 WEP support
device		wlan_ccmp	# 802.11 CCMP support
device		wlan_tkip	# 802.11 TKIP support
device		wlan_amrr	# AMRR transmit rate control algorithm
#device		an		# Aironet 4500/4800 802.11 wireless NICs.
#device		ath		# Atheros pci/cardbus NIC's
#device		ath_hal		# pci/cardbus chip support
#options 	AH_SUPPORT_AR5416	# enable AR5416 tx/rx descriptors
#device		ath_rate_sample	# SampleRate tx rate control for ath
#device		ral		# Ralink Technology RT2500 wireless NICs.
#device		wi		# WaveLAN/Intersil/Symbol 802.11 wireless NICs.
#device		wl		# Older non 802.11 Wavelan wireless NIC.

# Pseudo devices.
device		loop		# Network loopback
device		random		# Entropy device
device		ether		# Ethernet support
device		tun		# Packet tunnel.
device		pty		# BSD-style compatibility pseudo ttys
device		md		# Memory "disks"
device		gif		# IPv6 and IPv4 tunneling
device		faith		# IPv6-to-IPv4 relaying (translation)
device		firmware	# firmware assist module

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device		bpf		# Berkeley packet filter

# USB support
device		uhci		# UHCI PCI->USB interface
device		ohci		# OHCI PCI->USB interface
device		ehci		# EHCI PCI->USB interface (USB 2.0)
device		usb		# USB Bus (required)
#device		udbp		# USB Double Bulk Pipe devices
device		uhid		# "Human Interface Devices"
device		ukbd		# Keyboard
device		ulpt		# Printer
device		umass		# Disks/Mass storage - Requires scbus and da
device		ums		# Mouse
device		rum		# Ralink Technology RT2501USB wireless NICs
#device		ural		# Ralink Technology RT2500USB wireless NICs
#device		uath		# Atheros AR5523 wireless NICs
#device		zyd		# ZyDAS zb1211/zb1211b wireless NICs
#device		urio		# Diamond Rio 500 MP3 player
# USB Serial devices
#device		u3g		# USB-based 3G modems (Option, Huawei, Sierra)
#device		uark		# Technologies ARK3116 based serial adapters
#device		ubsa		# Belkin F5U103 and compatible serial adapters
#device		uftdi		# For FTDI usb serial adapters
#device		uipaq		# Some WinCE based devices
#device		uplcom		# Prolific PL-2303 serial adapters
#device		uslcom		# SI Labs CP2101/CP2102 serial adapters
#device		uvisor		# Visor and Palm devices
#device		uvscom		# USB serial support for DDI pocket's PHS
# USB Ethernet, requires miibus
#device		aue		# ADMtek USB Ethernet
#device		axe		# ASIX Electronics USB Ethernet
#device		cdce		# Generic USB over Ethernet
#device		cue		# CATC USB Ethernet
#device		kue		# Kawasaki LSI USB Ethernet
#device		rue		# RealTek RTL8150 USB Ethernet
#device		udav		# Davicom DM9601E USB

# FireWire support
#device		firewire	# FireWire bus code
#device		sbp		# SCSI over FireWire (Requires scbus and da)
#device		fwe		# Ethernet over FireWire (non-standard!)
#device		fwip		# IP over FireWire (RFC 2734,3146)
#device		dcons		# Dumb console driver
#device		dcons_crom	# Configuration ROM for dcons

options         NETGRAPH
options         MAC
device         drm
options         DUMMYNET
#options         VESA
options         SC_DISABLE_REBOOT
options         SC_PIXEL_MODE
options         SC_NORM_ATTR=(FG_GREEN|BG_BLACK)
options         SC_NORM_REV_ATTR=(FG_YELLOW|BG_GREEN)
options         SC_KERNEL_CONS_ATTR=(FG_GREEN|BG_BLACK)
options         SC_KERNEL_CONS_REV_ATTR=(FG_BLACK|BG_RED)

#device          atapicam

options         IPFIREWALL
options         IPFIREWALL_DEFAULT_TO_ACCEPT
options         IPFIREWALL_VERBOSE
options         IPDIVERT

device crypto
device padlock

options         HZ=1000
Received on Sun Nov 29 2009 - 15:19:37 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:58 UTC