re: 8.0RC1: Can't mount usb stick

On Fri, 2009-10-02 at 10:25 +0200, Goran Gajic wrote:
> Same here:
> 
> ugen2.2: <vendor 0x1005> at usbus2 (disconnected)
> umass0: at uhub2, port 5, addr 2 (disconnected)
> (da0:umass-sim0:0:0:0): lost device
> (da0:umass-sim0:0:0:0): removing device entry
> ugen2.2: <vendor 0x1005> at usbus2
> umass0: <vendor 0x1005 USB FLASH DRIVE, class 0/0, rev 2.00/1.10, addr 2> 
> on usbus2
> umass0:  SCSI over Bulk-Only; quirks = 0x0000
> umass0:1:0:-1: Attached to scbus1
> (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
> (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
> (probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
> (probe0:umass-sim0:0:0:0): Not ready to ready change, medium may have 
> changed
> (probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
> da0 at umass-sim0 bus 0 target 0 lun 0
> da0: < USB FLASH DRIVE PMAP> Removable Direct Access SCSI-0 device
> da0: 40.000MB/s transfers
> da0: 1968MB (4030464 512 byte sectors: 255H 63S/T 250C)
> 
> # mount -t msdosfs /dev/da0 /mnt
> mount_msdosfs: /dev/da0: Invalid argument

_and_ booting 8.0RC-1 from a ubs-stick results in a panic.....

cheers,
Marten

> 
> 
> gg.
> _______________________________________________
> freebsd-current_at_freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org"
-- 
Marten Vijn
linux 2.0.18 OpenBSD 3.6 FreeBSD 4.6
http://martenvijn.nl
http://opencommunitycamp.org
http://wifisoft.org