Hi Jack, Any chance on MFC'ing this version of the em driver ? I have another MB that does not work with RELENG_8, only HEAD. Its an Intel branded server motherboard with two onboard NICs. S3420GPC. One of the em nics shows up on RELENG_8, but not both. em1 shows up on RELENG_8, but em0 does not attach on RELENG_8. dmesg below from a snapshot of HEAD from this morning. I guess the onboard NICs are two different types of em nics? BTW, Is one "better" than the other ? em0_at_pci0:0:25:0: class=0x020000 card=0x34ec8086 chip=0x10ef8086 rev=0x05 hdr=0x00 vendor = 'Intel Corporation' class = network subclass = ethernet cap 01[c8] = powerspec 2 supports D0 D3 current D0 cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message cap 13[e0] = PCI Advanced Features: FLR TP em1_at_pci0:3:0:0: class=0x020000 card=0x34ec8086 chip=0x10d38086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' class = network subclass = ethernet cap 01[c8] = powerspec 2 supports D0 D3 current D0 cap 05[d0] = MSI supports 1 message, 64 bit cap 10[e0] = PCI-Express 1 endpoint max data 128(256) link x1(x1) cap 11[a0] = MSI-X supports 5 messages in map 0x1c enabled FreeBSD 9.0-CURRENT #3: Fri Feb 5 11:43:38 EST 2010 mdtancsa_at_ich10.sentex.ca:/usr/HEAD/obj/usr/HEAD/src/sys/alix i386 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM) i5 CPU 750 _at_ 2.67GHz (2666.65-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x106e5 Stepping = 5 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x98e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT> AMD Features=0x28100000<NX,RDTSCP,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant real memory = 4294967296 (4096 MB) avail memory = 2582040576 (2462 MB) ACPI APIC Table: <INTEL S3420GPC> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 2 cpu2 (AP): APIC ID: 4 cpu3 (AP): APIC ID: 6 ioapic0 <Version 2.0> irqs 0-23 on motherboard lapic0: Forcing LINT1 to edge trigger kbd1 at kbdmux0 cryptosoft0: <software crypto> on motherboard acpi0: <INTEL S3420GPC> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 5.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem 0xb0000000-0xbfffffff,0xc1a00000-0xc1a0ffff irq 16 at device 0.0 on pci1 pci1: <multimedia, HDA> at device 0.1 (no driver attached) pci0: <base peripheral> at device 8.0 (no driver attached) pci0: <base peripheral> at device 8.1 (no driver attached) pci0: <base peripheral> at device 8.2 (no driver attached) pci0: <base peripheral> at device 8.3 (no driver attached) pci0: <base peripheral> at device 16.0 (no driver attached) pci0: <base peripheral> at device 16.1 (no driver attached) em0: <Intel(R) PRO/1000 Network Connection 6.9.25> port 0x3040-0x305f mem 0xc1b00000-0xc1b1ffff,0xc1b25000-0xc1b25fff irq 20 at device 25.0 on pci0 em0: Using MSI interrupt em0: [FILTER] em0: Ethernet address: 00:15:17:c8:4b:99 ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xc1b22000-0xc1b223ff irq 21 at device 26.0 on pci0 ehci0: [ITHREAD] usbus0: EHCI version 1.0 usbus0: <Intel PCH USB 2.0 controller USB-B> on ehci0 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 pci3: <ACPI PCI bus> on pcib3 em1: <Intel(R) PRO/1000 Network Connection 6.9.25> port 0x1000-0x101f mem 0xc1900000-0xc191ffff,0xc1920000-0xc1923fff irq 16 at device 0.0 on pci3 em1: Using MSIX interrupts em1: [ITHREAD] em1: [ITHREAD] em1: [ITHREAD] em1: Ethernet address: 00:15:17:c8:4b:98 pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 pci5: <ACPI PCI bus> on pcib5 ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xc1b21000-0xc1b213ff irq 23 at device 29.0 on pci0 ehci1: [ITHREAD] usbus1: EHCI version 1.0 usbus1: <Intel PCH USB 2.0 controller USB-A> on ehci1 pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci6: <ACPI PCI bus> on pcib6 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel AHCI controller> port 0x3068-0x306f,0x3074-0x3077,0x3060-0x3067,0x3070-0x3073,0x3020-0x303f mem 0xc1b20000-0xc1b207ff irq 18 at device 31.2 on pci0 atapci0: [ITHREAD] atapci0: AHCI v1.30 controller with 6 3Gbps ports, PM not supported ata2: <ATA channel 0> on atapci0 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: [ITHREAD] ata4: <ATA channel 2> on atapci0 ata4: [ITHREAD] ata5: <ATA channel 3> on atapci0 ata5: [ITHREAD] ata6: <ATA channel 4> on atapci0 ata6: [ITHREAD] ata7: <ATA channel 5> on atapci0 ata7: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_button0: <Sleep Button> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: [FILTER] uart0: console (9600,n,8,1) uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 uart1: [FILTER] cpu0: <ACPI CPU> on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 cpu2: <ACPI CPU> on acpi0 est2: <Enhanced SpeedStep Frequency Control> on cpu2 p4tcc2: <CPU Frequency Thermal Control> on cpu2 cpu3: <ACPI CPU> on acpi0 est3: <Enhanced SpeedStep Frequency Control> on cpu3 p4tcc3: <CPU Frequency Thermal Control> on cpu3 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xd0000-0xd0fff,0xd1000-0xd1fff pnpid ORM0000 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata0: [ITHREAD] ata1 at port 0x170-0x177,0x376 irq 15 on isa0 ata1: [ITHREAD] Timecounters tick every 1.000 msec IPsec: Initialized Security Association Processing. usbus0: 480Mbps High Speed USB v2.0 usbus1: 480Mbps High Speed USB v2.0 lapic6: Forcing LINT1 to edge trigger SMP: AP CPU #3 Launched! lapic4: Forcing LINT1 to edge trigger SMP: AP CPU #2 Launched! lapic2: Forcing LINT1 to edge trigger SMP: AP CPU #1 Launched! ugen1.1: <Intel> at usbus1Root mount waiting for:ugen0.1: <Intel> at usbus0 usbus1 usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered Root mount waiting for: usbus1 usbus0 ugen0.2: <vendor 0x8087> at usbus0 uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus0 ugen1.2: <vendor 0x8087> at usbus1 uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus1 uhub2: 6 ports with 6 removable, self powered uhub3: 6 ports with 6 removable, self powered ugen1.3: <American Megatrends Inc.> at usbus1ugen0.3: <GASIA> at usbus0 ukbd1: <GASIA PS2toUSB Adapter, class 0/0, rev 1.10/1.00, addr 3> on usbus0 Root mount waiting for: usbus1 usbus0 ukbd0: <Keyboard Interface> on usbus1 kbd0 at ukbd1 kbd2 at ukbd0 uhid1: <GASIA PS2toUSB Adapter, class 0/0, rev 1.10/1.00, addr 3> on usbus0 uhid0: <Mouse Interface> on usbus1 Trying to mount root from nfs: NFS ROOT: 10.255.255.1:/usr/home/pxe9/ At 02:49 PM 1/22/2010, Jack Vogel wrote: >Mike, can you tell me more details about the system, is this a laptop? > >Jack > > >On Fri, Jan 22, 2010 at 5:40 AM, Mike Tancsa ><<mailto:mike_at_sentex.net>mike_at_sentex.net> wrote: >Not sure how easy it is to repeat, but running HEAD from yesterday >causes the em0 do post a >em0: Watchdog timeout -- resetting >to the serial console on a new i3 system that we just got to test >with. At that point, the box's network is no longer responding. It >netboots off em0 so not sure if the hang after that is nfs not >recovering or not, but it does not respond to network traffic at all. > >em0_at_pci0:0:25:0: class=0x020000 card=0x00368086 >chip=0x10f08086 rev=0x06 hdr=0x00 > vendor = 'Intel Corporation' > class = network > subclass = ethernet > cap 01[c8] = powerspec 2 supports D0 D3 current D0 > cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message > cap 13[e0] = PCI Advanced Features: FLR TP >ehci0_at_pci0:0:26:0: class=0x0c0320 card=0x00368086 >chip=0x3b3c8086 rev=0x06 hdr=0x00 > >Copyright (c) 1992-2010 The FreeBSD Project. >Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. >FreeBSD is a registered trademark of The FreeBSD Foundation. >FreeBSD 9.0-CURRENT #0: Thu Jan 21 15:14:14 EST 2010 > mdtancsa_at_ich10.sentex.ca:/usr/HEAD/obj/usr/HEAD/src/sys/alix i386 >Timecounter "i8254" frequency 1193182 Hz quality 0 >CPU: Intel(R) Core(TM) i3 CPU 530 _at_ 2.93GHz (2926.02-MHz >686-class CPU) > Origin = "GenuineIntel" Id = 0x20652 Stepping = 2 > >Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > >Features2=0x98e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT> > AMD Features=0x28100000<NX,RDTSCP,LM> > AMD Features2=0x1<LAHF> > TSC: P-state invariant >real memory = 1073741824 (1024 MB) >avail memory = 894119936 (852 MB) >ACPI APIC Table: <INTEL DH55TC > >FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs >FreeBSD/SMP: 1 package(s) x 2 core(s) > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 4 >ACPI Warning: 32/64X FACS address mismatch in FADT - >3762AE40/ 03762AD40, using 32 (20091214/tbfadt-586) >ioapic0 <Version 2.0> irqs 0-23 on motherboard >kbd1 at kbdmux0 >cryptosoft0: <software crypto> on motherboard >acpi0: <INTEL DH55TC> on motherboard >acpi0: [ITHREAD] >acpi0: Power Button (fixed) >Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 >acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 >acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 >Timecounter "HPET" frequency 14318180 Hz quality 900 >pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 >pci0: <ACPI PCI bus> on pcib0 >vgapci0: <VGA-compatible display> port 0xf100-0xf107 mem >0xfe000000-0xfe3fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 >pci0: <simple comms> at device 22.0 (no driver attached) >atapci0: <Intel ATA controller> port >0xf0f0-0xf0f7,0xf0e0-0xf0e3,0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0bf > irq 18 at device 22.2 on pci0 >atapci0: [ITHREAD] >ata2: <ATA channel 0> on atapci0 >ata2: [ITHREAD] >ata3: <ATA channel 1> on atapci0 >ata3: [ITHREAD] >pci0: <simple comms, UART> at device 22.3 (no driver attached) >em0: <Intel(R) PRO/1000 Network Connection 6.9.24> port >0xf040-0xf05f mem 0xfe400000-0xfe41ffff,0xfe428000-0xfe428fff irq 20 >at device 25.0 on pci0 >em0: Using MSI interrupt >em0: [FILTER] >em0: Ethernet address: 00:27:0e:09:5e:00 >ehci0: <Intel PCH USB 2.0 controller USB-B> mem >0xfe427000-0xfe4273ff irq 16 at device 26.0 on pci0 >ehci0: [ITHREAD] >usbus0: EHCI version 1.0 >usbus0: <Intel PCH USB 2.0 controller USB-B> on ehci0 >pci0: <multimedia, HDA> at device 27.0 (no driver attached) >pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 >pci1: <ACPI PCI bus> on pcib1 >pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 >pci2: <ACPI PCI bus> on pcib2 >ehci1: <Intel PCH USB 2.0 controller USB-A> mem >0xfe426000-0xfe4263ff irq 23 at device 29.0 on pci0 >ehci1: [ITHREAD] >usbus1: EHCI version 1.0 >usbus1: <Intel PCH USB 2.0 controller USB-A> on ehci1 >pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 >pci3: <ACPI PCI bus> on pcib3 >isab0: <PCI-ISA bridge> at device 31.0 on pci0 >isa0: <ISA bus> on isab0 >atapci1: <Intel AHCI controller> port >0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf020-0xf03f > mem 0xfe425000-0xfe4257ff irq 19 at device 31.2 on pci0 >atapci1: [ITHREAD] >atapci1: AHCI v1.30 controller with 6 3Gbps ports, PM not supported >ata4: <ATA channel 0> on atapci1 >ata4: [ITHREAD] >ata5: <ATA channel 1> on atapci1 >ata5: [ITHREAD] >ata6: <ATA channel 2> on atapci1 >ata6: [ITHREAD] >ata7: <ATA channel 3> on atapci1 >ata7: [ITHREAD] >ata8: <ATA channel 4> on atapci1 >ata8: [ITHREAD] >ata9: <ATA channel 5> on atapci1 >ata9: [ITHREAD] >pci0: <serial bus, SMBus> at device 31.3 (no driver attached) >acpi_button0: <Power Button> on acpi0 >atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 >atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 >atkbd0: <AT Keyboard> irq 1 on atkbdc0 >kbd0 at atkbd0 >atkbd0: [GIANT-LOCKED] >atkbd0: [ITHREAD] >uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 >uart0: [FILTER] >uart0: console (9600,n,8,1) >cpu0: <ACPI CPU> on acpi0 >est0: <Enhanced SpeedStep Frequency Control> on cpu0 >p4tcc0: <CPU Frequency Thermal Control> on cpu0 >cpu1: <ACPI CPU> on acpi0 >est1: <Enhanced SpeedStep Frequency Control> on cpu1 >p4tcc1: <CPU Frequency Thermal Control> on cpu1 >pmtimer0 on isa0 >orm0: <ISA Option ROM> at iomem 0xcd000-0xcdfff pnpid ORM0000 on isa0 >sc0: <System console> at flags 0x100 on isa0 >sc0: VGA <16 virtual consoles, flags=0x300> >vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 >ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 >ata0: [ITHREAD] >ata1 at port 0x170-0x177,0x376 irq 15 on isa0 >ata1: [ITHREAD] >Timecounters tick every 1.000 msec >IPsec: Initialized Security Association Processing. >usbus0: 480Mbps High Speed USB v2.0 >usbus1: 480Mbps High Speed USB v2.0 >ad0: 76319MB <Seagate ST380811AS 3.AAE> at ata4-master UDMA100 SATA 1.5Gb/s >SMP: AP CPU #1 Launched! >ugen0.1: <Intel> at usbus0ugen1.1: <Intel> at usbus1 >uhub0: ><Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 >uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 >Root mount waiting for: usbus1 usbus0 >Root mount waiting for: usbus1 usbus0 >uhub0: 3 ports with 3 removable, self powered >uhub1: 3 ports with 3 removable, self powered >Root mount waiting for: usbus1 usbus0 >ugen0.2: <vendor 0x8087> at usbus0 >uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr >2> on usbus0 >ugen1.2: <vendor 0x8087> at usbus1 >uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr >2> on usbus1 >uhub2: 6 ports with 6 removable, self powered >Root mount waiting for: usbus1 >uhub3: 6 ports with 6 removable, self powered >Trying to mount root from nfs: >NFS ROOT: 10.255.255.1:/usr/home/pxe9/ > >-------------------------------------------------------------------- >Mike Tancsa, tel +1 519 651 3400 >Sentex >Communications, ><mailto:mike_at_sentex.net>mike_at_sentex.net >Providing Internet since >1994 <http://www.sentex.net>www.sentex.net >Cambridge, Ontario >Canada <http://www.sentex.net/mike>www.sentex.net/mike > -------------------------------------------------------------------- Mike Tancsa, tel +1 519 651 3400 Sentex Communications, mike_at_sentex.net Providing Internet since 1994 www.sentex.net Cambridge, Ontario Canada www.sentex.net/mikeReceived on Mon Feb 22 2010 - 18:46:33 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:01 UTC