Re: tun setup (routing?) issue in head

From: Andriy Gapon <avg_at_icyb.net.ua>
Date: Mon, 25 Jan 2010 18:01:07 +0200
on 25/01/2010 17:52 Li, Qing said the following:
> Yes, the failure is due to route installation. To make a long story short, many of the
> scripts that worked before not necessary because of the right reasons. 
>  
> I have been very busy at work, but I do have a patch and I will try to get it 
> finalized shortly.

I see, cool!
Perhaps there is some interim work-around for this issue?
I can not access my work VPN because of this and I don't like having to roll back
my kernel.

> From: owner-freebsd-current_at_freebsd.org on behalf of Andriy Gapon
> Sent: Mon 1/25/2010 4:47 AM
> To: freebsd-net_at_freebsd.org; freebsd-current_at_freebsd.org
> Subject: tun setup (routing?) issue in head
> 
> 
> 
> 
> I've updated my HEAD amd64 system from December's sources to something more recent
> and I've got problems with security/vpnc. To be precise vpnc itself seems to work
> as good as before but its post-connect script is now failing:
> 
> $ ifconfig tun0 inet 10.99.15.144 10.99.15.144 netmask 255.255.255.255 mtu 1412 up
> ifconfig: ioctl (SIOCAIFADDR): File exists
> 
> Where tun0 is an interface created by vpnc.
> ktrace gives this:
> ifconfig CALL  socket(PF_INET,SOCK_DGRAM,IPPROTO_IP)
> ifconfig RET   socket 3
> ifconfig CALL  ioctl(0x3,SIOCSIFMTU,0x525a60)
> ifconfig RET   ioctl 0
> ifconfig CALL  ioctl(0x3,SIOCGIFFLAGS,0x7fffffffda30)
> ifconfig RET   ioctl 0
> ifconfig CALL  ioctl(0x3,SIOCSIFFLAGS,0x7fffffffda30)
> ifconfig RET   ioctl 0
> ifconfig CALL  ioctl(0x3,SIOCDIFADDR,0x525380)
> ifconfig RET   ioctl -1 errno 49 Can't assign requested address
> ifconfig CALL  ioctl(0x3,SIOCAIFADDR,0x525340)
> ifconfig RET   ioctl -1 errno 17 File exists
> ifconfig CALL  write(0x2,0x7fffffffd2d0,0xa)
> 
> So, what's happening?
> Do you I have to update the ifconfig command?
> Or is there some issue in the networking code?
> 
> BTW, I also get the following messages in the system log when vpnc is started:
> kernel: tun0: link state changed to UP
> kernel: ifa_add_loopback_route: insertion failed
> I have net.link.tap.up_on_open=1 in sysctl.conf if that matters.
> 
> --
> Andriy Gapon
> _______________________________________________
> freebsd-current_at_freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org"
> 
> 


-- 
Andriy Gapon
Received on Mon Jan 25 2010 - 15:02:07 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:00 UTC