On Wed, 2010-06-23 at 15:00 -0500, Alexander Motin wrote: > hint.atrtc.0.clock=0 > hint.attimer.0.clock=0 > hint.hpet.0.legacy_route=1 after adding those to the VM: Copyright (c) 1992-2010 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.0-CURRENT #2 r209470: Wed Jun 23 11:15:21 PDT 2010 sbruno_at_test:/mnt/nfs/fbsd/head/sys/amd64/compile/SEAN amd64 WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80b72000. Calibrating TSC clock ... TSC clock: 2527057361 Hz CPU: QEMU Virtual CPU version 0.11.0 (2527.06-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x623 Family = 6 Model = 2 Stepping = 3 Features=0x783fbfd<FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,SSE2> Features2=0x80000001<SSE3,<b31>> AMD Features=0x20100800<SYSCALL,NX,LM> real memory = 2147483648 (2048 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009afff, 630784 bytes (154 pages) 0x0000000000ba0000 - 0x000000007c38ffff, 2071920640 bytes (505840 pages) avail memory = 2059055104 (1963 MB) Event timer "LAPIC" frequency 0 Hz quality 500 ACPI APIC Table: <QEMU QEMUAPIC> INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 2 package(s) x 1 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 x86bios: IVT 0x000000-0x0004ff at 0xffffff0000000000 x86bios: SSEG 0x010000-0x01ffff at 0xffffff800000d000 x86bios: EBDA 0x09f000-0x09ffff at 0xffffff000009f000 x86bios: ROM 0x0a0000-0x0effff at 0xffffff00000a0000 ULE: setup cpu 0 ULE: setup cpu 1 ACPI: RSDP 0xfbd40 00014 (v0 QEMU ) ACPI: RSDT 0x7fff0000 00034 (v1 QEMU QEMURSDT 00000001 QEMU 00000001) ACPI: FACP 0x7fff01b4 00074 (v1 QEMU QEMUFACP 00000001 QEMU 00000001) ACPI: DSDT 0x7fff0280 01DD4 (v1 BXPC BXDSDT 00000001 INTL 20090123) ACPI: FACS 0x7fff0240 00040 ACPI: SSDT 0x7fff2054 009E3 (v1 BXPC BXSSDT 00000001 INTL 20090123) ACPI: APIC 0x7fff2a38 000EA (v1 QEMU QEMUAPIC 00000001 QEMU 00000001) ACPI: HPET 0x7fff2b90 00038 (v1 QEMU QEMUHPET 00000001 QEMU 00000001) MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 2 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 5, irq 5 ioapic0: intpin 5 trigger: level MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level MADT: Interrupt override: source 10, irq 10 ioapic0: intpin 10 trigger: level MADT: Interrupt override: source 11, irq 11 ioapic0: intpin 11 trigger: level ioapic0 <Version 1.1> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x00000000 random: <entropy source, Software, Yarrow> io: <I/O> nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> null: <null device, zero device> acpi0: <QEMU QEMURSDT> on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.PX13.P13C -> bus 0 dev 1 func 3 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.ISA_.P40C -> bus 0 dev 1 func 0 ACPI timer: 0/211 0/1431 0/166 0/168 0/38700 0/22874 0/2046 0/22171 0/204 0/579 -> 0 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xb008-0xb00b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu0: switching to generic Cx mode cpu1: <ACPI CPU> on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 5 10 11 Validation 0 10 N 0 5 10 11 After Disable 0 255 N 0 5 10 11 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 5 10 11 Validation 0 10 N 0 5 10 11 After Disable 0 255 N 0 5 10 11 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 5 10 11 Validation 0 11 N 0 5 10 11 After Disable 0 255 N 0 5 10 11 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 5 10 11 Validation 0 11 N 0 5 10 11 After Disable 0 255 N 0 5 10 11 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 hpet0: vendor 0x8086, rev 0x1, 100000000Hz 64bit, 3 timers, legacy route hpet0: t0: irqs 0x00000004 (0), 64bit, periodic hpet0: t1: irqs 0x00000004 (0), 64bit, periodic hpet0: t2: irqs 0x00000004 (0), 64bit, periodic Timecounter "HPET" frequency 100000000 Hz quality 900 ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 49 hpet0: [MPSAFE] hpet0: [FILTER] ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 50 hpet0: [MPSAFE] hpet0: [FILTER] Event timer "HPET" frequency 100000000 Hz quality 550 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ACPI: Found matching pin for 0.1.INTA at func 3: 9 pci_link0: BIOS IRQ 9 does not match initial IRQ 10 ACPI: Found matching pin for 0.1.INTD at func 2: 11 ACPI: Found matching pin for 0.3.INTA at func 0: 11 ACPI: Found matching pin for 0.4.INTA at func 0: 11 ACPI: Found matching pin for 0.5.INTA at func 0: 10 pci_link0: BIOS IRQ 10 for 0.5.INTA does not match previous BIOS IRQ 9 pci0: <ACPI PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x1237, revid=0x02 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7000, revid=0x00 domain=0, bus=0, slot=1, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7010, revid=0x00 domain=0, bus=0, slot=1, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type I/O Port, range 32, base 0xc000, size 4, enabled found-> vendor=0x8086, dev=0x7020, revid=0x01 domain=0, bus=0, slot=1, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 map[20]: type I/O Port, range 32, base 0xc020, size 5, enabled pcib0: matched entry for 0.1.INTD (src \\_SB_.LNKD:0) pcib0: slot 1 INTD routed to irq 11 via \\_SB_.LNKD found-> vendor=0x8086, dev=0x7113, revid=0x03 domain=0, bus=0, slot=1, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=9 pcib0: matched entry for 0.1.INTA (src \\_SB_.LNKA:0) pcib0: slot 1 INTA routed to irq 9 via \\_SB_.LNKA found-> vendor=0x1013, dev=0x00b8, revid=0x00 domain=0, bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type Prefetchable Memory, range 32, base 0xf0000000, size 25, enabled map[14]: type Memory, range 32, base 0xf2000000, size 12, enabled found-> vendor=0x8086, dev=0x100e, revid=0x03 domain=0, bus=0, slot=3, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0407, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[10]: type Memory, range 32, base 0xf2020000, size 17, enabled map[14]: type I/O Port, range 32, base 0xc040, size 6, enabled pcib0: matched entry for 0.3.INTA (src \\_SB_.LNKC:0) pcib0: slot 3 INTA routed to irq 11 via \\_SB_.LNKC found-> vendor=0x1274, dev=0x5000, revid=0x00 domain=0, bus=0, slot=4, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0400, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x80 (32000 ns) intpin=a, irq=11 map[10]: type I/O Port, range 32, base 0xc100, size 8, enabled pcib0: matched entry for 0.4.INTA (src \\_SB_.LNKD:0) pcib0: slot 4 INTA routed to irq 11 via \\_SB_.LNKD found-> vendor=0x1af4, dev=0x1002, revid=0x00 domain=0, bus=0, slot=5, func=0 class=05-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[10]: type I/O Port, range 32, base 0xc200, size 5, enabled pcib0: matched entry for 0.5.INTA (src \\_SB_.LNKA:0) pcib0: slot 5 INTA routed to irq 9 via \\_SB_.LNKA isab0: <PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX3 WDMA2 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xc000-0xc00f at device 1.1 on pci0 ata0: <ATA channel 0> on atapci0 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x00 lsb=0xff msb=0xff ata0: reset tp2 stat0=50 stat1=00 devices=0x1 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 51 ata0: [MPSAFE] ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: reset tp1 mask=03 ostat0=00 ostat1=00 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x00 lsb=0xff msb=0xff ata1: reset tp2 stat0=00 stat1=00 devices=0x10000 ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 52 ata1: [MPSAFE] ata1: [ITHREAD] uhci0: <Intel 82371SB (PIIX3) USB controller> port 0xc020-0xc03f irq 11 at device 1.2 on pci0 ioapic0: routing intpin 11 (ISA IRQ 11) to lapic 0 vector 53 uhci0: [MPSAFE] uhci0: [ITHREAD] usbus0: controller did not stop usbus0: <Intel 82371SB (PIIX3) USB controller> on uhci0 pci0: <bridge> at device 1.3 (no driver attached) vgapci0: <VGA-compatible display> mem 0xf0000000-0xf1ffffff,0xf2000000-0xf2000fff at device 2.0 on pci0 em0: <Intel(R) PRO/1000 Legacy Network Connection 1.0.1> port 0xc040-0xc07f mem 0xf2020000-0xf203ffff irq 11 at device 3.0 on pci0 em0: [FILTER] em0: bpf attached em0: Ethernet address: 52:54:00:3d:e6:07 em0: Link is up 1000 Mbps Full Duplex pci0: <multimedia, audio> at device 4.0 (no driver attached) pci0: <memory, RAM> at device 5.0 (no driver attached) atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us) atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0061 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 54 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to allocate IRQ psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 psm0: current command byte:0061 psm0: <PS/2 Mouse> irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 55 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse Explorer, device ID 4-00, 5 buttons psm0: config:00000000, flags:00000008, packet size:4 psm0: syncmask:08, syncbits:00 fdc0: <floppy drive controller> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: does not respond device_attach: fdc0 attach returned 6 uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 56 uart0: [FILTER] uart0: fast interrupt acpi0: wakeup code va 0xffffff8000112000 pa 0x4000 isa_probe_children: disabling PnP devices atkbdc: atkbdc0 already exists; skipping it atrtc: atrtc0 already exists; skipping it fdc: fdc0 already exists; skipping it sc: sc0 already exists; skipping it uart: uart0 already exists; skipping it isa_probe_children: probing non-PnP devices sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0 failed to probe at irq 7 on isa0 uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0 isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 132662 -> 100000 procfs registered Timecounter "TSC" frequency 2527057361 Hz quality -100 Starting kernel event timers: HPET _at_ 100Hz, LAPIC _at_ 128Hz lapic: Divisor 2, Frequency 500021395 Hz Event timer "LAPIC" is dead. Starting kernel event timers: HPET _at_ 400Hz, NONE _at_ 0Hz Timecounters tick every 10.000 msec vlan: initialized, using hash tables with chaining lo0: bpf attached Profiling kernel, textsize=4602064 [ffffffff8016be00..ffffffff805cf6d0] ata0: Identifying devices: 00000001 ata0: New devices: 00000001 ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire usbus0: 12Mbps Full Speed USB v1.0 ad0: setting WDMA2 ad0: 10240MB <QEMU HARDDISK 0.11.0> at ata0-master WDMA2 ad0: 20971520 sectors [20805C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 ad0: Intel check1 failed ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ad0: Adaptec check1 failed ad0: LSI (v3) check1 failed ad0: LSI (v2) check1 failed ad0: FreeBSD check1 failed ata1: Identifying devices: 00010000 ata1: New devices: 00010000 ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire acd0: setting WDMA2 acd0: <QEMU DVD-ROM/0.11.0> CDROM drive at ata1 as master acd0: read 689KB/s (689KB/s), 512KB buffer, WDMA2 acd0: Reads: acd0: Writes: acd0: Audio: play, 2 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x00000000 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 1 vector 48 ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 1 vector 49 ioapic0: routing intpin 11 (ISA IRQ 11) to lapic 1 vector 50 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 1 vector 51 WARNING: WITNESS option enabled, expect reduced performance. Root mount waiting for: usbus0 uhub0: 2 ports with 2 removable, self powered Trying to mount root from ufs:/dev/ad0s1a ct_to_ts([2010-06-23 20:42:33]) = 1277325753.000000000 start_init: trying /sbin/initReceived on Wed Jun 23 2010 - 18:53:57 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:05 UTC