> Thank you all for the replies. Will try ATA_CAM shortly. > To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org" Using ATA_CAM it doesn't panic, it removes the bad disk from /dev after the problem. new dmesg and the error log on the bottom Table 'FACP' at 0x7fff0290 Table 'APIC' at 0x7fff0390 APIC: Found table at 0x7fff0390 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 1: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 2: enabled SMP: Added CPU 1 (AP) MADT: Found CPU APIC ID 130 ACPI ID 3: disabled MADT: Found CPU APIC ID 131 ACPI ID 4: disabled Copyright (c) 1992-2010 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.0-CURRENT #1: Tue Nov 23 17:50:01 EST 2010 root_at_butter.local:/usr/obj/usr/src/sys/GENERIC amd64 WARNING: WITNESS option enabled, expect reduced performance. Table 'FACP' at 0x7fff0290 Table 'APIC' at 0x7fff0390 Table 'OEMB' at 0x7fffe040 Table 'SRAT' at 0x7fff41d0 SRAT: Found table at 0x7fff41d0 SRAT: Found CPU APIC ID 0 domain 0: enabled SRAT: Found CPU APIC ID 1 domain 1: enabled SRAT: Found CPU APIC ID 2 domain 2: disabled SRAT: Found CPU APIC ID 3 domain 3: disabled SRAT: Found memory domain 0 addr 100000 len 3ff00000: enabled SRAT: Found memory domain 1 addr 40000000 len 40000000: enabled SRAT: Found memory domain 2 addr 0 len 0: disabled SRAT: Found memory domain 3 addr 0 len 0: disabled SRAT: Found memory domain 0 addr 0 len 0: disabled SRAT: Found memory domain 0 addr 0 len 9fc00: enabled SRAT: No memory region found for 10fb000 - 7ffe0000 Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff810cd000. Calibrating TSC clock ... TSC clock: 2394052032 Hz CPU: AMD Opteron(tm) Processor 250 (2394.05-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x20f51 Family = f Model = 25 Stepping = 1 Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> Features2=0x1<SSE3> AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!> AMD Features2=0x1<LAHF> L1 2MB data TLB: 8 entries, fully associative L1 2MB instruction TLB: 8 entries, fully associative L1 4KB data TLB: 32 entries, fully associative L1 4KB instruction TLB: 32 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 2MB unified TLB: 0 entries, disabled/not present L2 4KB data TLB: 512 entries, 4-way associative L2 4KB instruction TLB: 512 entries, 4-way associative L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative WARNING: This architecture revision has known SMP hardware bugs which may cause random instability real memory = 2147483648 (2048 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages) 0x00000000010fb000 - 0x000000007c38ffff, 2066305024 bytes (504469 pages) avail memory = 2050400256 (1955 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <A M I OEMAPIC > INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 2 package(s) x 1 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 2 x86bios: IVT 0x000000-0x0004ff at 0xffffff0000000000 x86bios: SSEG 0x001000-0x001fff at 0xffffff800000d000 x86bios: EBDA 0x09f000-0x09ffff at 0xffffff000009f000 x86bios: ROM 0x0a0000-0x0fefff at 0xffffff00000a0000 ULE: setup cpu 0 ULE: setup cpu 1 ACPI: RSDP 0xf9cd0 00024 (v02 ACPIAM) ACPI: XSDT 0x7fff0100 00044 (v01 A M I OEMXSDT 06000630 MSFT 00000097) ACPI: FACP 0x7fff0290 000F4 (v03 A M I OEMFACP 06000630 MSFT 00000097) ACPI: DSDT 0x7fff0410 03DBD (v01 0ABGZ 0ABGZ005 00000005 INTL 02002026) ACPI: FACS 0x7fffe000 00040 ACPI: APIC 0x7fff0390 00080 (v01 A M I OEMAPIC 06000630 MSFT 00000097) ACPI: OEMB 0x7fffe040 00056 (v01 A M I AMI_OEM 06000630 MSFT 00000097) ACPI: SRAT 0x7fff41d0 00160 (v01 A M I OEMSRAT 06000630 MSFT 00000097) MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 MADT: Found IO APIC ID 3, Interrupt 16 at 0xfec01000 MADT: Found IO APIC ID 4, Interrupt 32 at 0xfec02000 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high MADT: Forcing active-low polarity and level trigger for SCI ioapic0: intpin 9 polarity: low ioapic0: intpin 9 trigger: level ioapic0 <Version 1.1> irqs 0-15 on motherboard ioapic1 <Version 1.1> irqs 16-31 on motherboard ioapic2 <Version 1.1> irqs 32-47 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00040010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00000000 err: 0x000000f0 pmc: 0x00010400 wlan: <802.11 Link Layer> kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> nfslock: pseudo-device null: <null device, zero device> random: <entropy source, Software, Yarrow> io: <I/O> hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 CPU0: local APIC error 0x80 acpi0: <A M I OEMXSDT> on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 ACPI: Executed 1 blocks of module-level executable AML code acpi0: Power Button (fixed) acpi0: Sleep Button (fixed) acpi0: reservation of 540, 20 (4) failed acpi0: reservation of 500, 20 (4) failed acpi0: reservation of 560, 20 (4) failed acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 7ff00000 (3) failed ACPI timer: 0/4 0/4 0/4 0/5 0/4 0/4 0/4 0/4 0/4 0/4 -> 0 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu0: switching to generic Cx mode cpu1: <ACPI CPU> on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 9 10 11 12 14 15 Validation 0 255 N 0 3 4 5 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 9 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 9 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 5 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link8: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link9: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link10: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link11: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link12: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 10 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link13: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link14: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link15: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link16: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link17: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link18: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link19: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link20: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link21: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link22: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link23: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link24: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link25: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link26: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link27: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link28: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link29: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link30: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link31: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 10 Validation 0 10 N 0 10 After Disable 0 255 N 0 10 pci_link32: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 11 Validation 0 11 N 0 11 After Disable 0 255 N 0 11 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x1166, dev=0x0036, revid=0x00 domain=0, bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0205, revid=0x00 domain=0, bus=0, slot=2, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0107, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0214, revid=0x00 domain=0, bus=0, slot=2, func=1 class=01-01-8a, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0200, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type I/O Port, range 32, base 0xffa0, size 4, enabled found-> vendor=0x1166, dev=0x0234, revid=0x00 domain=0, bus=0, slot=2, func=2 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0107, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0223, revid=0x01 domain=0, bus=0, slot=3, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xfebfa000, size 12, enabled map[14]: type I/O Port, range 32, base 0xe800, size 8, enabled pcib0: matched entry for 0.3.INTA pcib0: slot 3 INTA hardwired to IRQ 10 ioapic0: Changing trigger for pin 10 to level ioapic0: Changing polarity for pin 10 to low ohci early: SMM active, request owner change found-> vendor=0x1166, dev=0x0223, revid=0x01 domain=0, bus=0, slot=3, func=1 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xfebf9000, size 12, enabled map[14]: type I/O Port, range 32, base 0xd800, size 8, enabled pcib0: matched entry for 0.3.INTA pcib0: slot 3 INTA hardwired to IRQ 10 ohci early: SMM active, request owner change found-> vendor=0x1166, dev=0x0223, revid=0x01 domain=0, bus=0, slot=3, func=2 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfebf8000, size 12, enabled map[14]: type I/O Port, range 32, base 0xd400, size 8, enabled pcib0: matched entry for 0.3.INTA pcib0: slot 3 INTA hardwired to IRQ 10 found-> vendor=0x1002, dev=0x4752, revid=0x27 domain=0, bus=0, slot=5, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0087, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfd000000, size 24, enabled map[14]: type I/O Port, range 32, base 0xe000, size 8, enabled map[18]: type Memory, range 32, base 0xfebff000, size 12, enabled pcib0: matched entry for 0.5.INTA pcib0: slot 5 INTA hardwired to IRQ 28 found-> vendor=0x1166, dev=0x0130, revid=0xa3 domain=0, bus=0, slot=8, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0130, revid=0xa3 domain=0, bus=0, slot=9, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0132, revid=0xa3 domain=0, bus=0, slot=10, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0132, revid=0xa3 domain=0, bus=0, slot=11, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0132, revid=0xa3 domain=0, bus=0, slot=12, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0132, revid=0xa3 domain=0, bus=0, slot=13, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1100, revid=0x00 domain=0, bus=0, slot=24, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1101, revid=0x00 domain=0, bus=0, slot=24, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1102, revid=0x00 domain=0, bus=0, slot=24, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1103, revid=0x00 domain=0, bus=0, slot=24, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1100, revid=0x00 domain=0, bus=0, slot=25, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1101, revid=0x00 domain=0, bus=0, slot=25, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1102, revid=0x00 domain=0, bus=0, slot=25, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1103, revid=0x00 domain=0, bus=0, slot=25, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 2 pcib1: I/O decode 0xa000-0xbfff pcib1: memory decode 0xfc900000-0xfc9fffff pcib1: no prefetched decode pci1: <ACPI PCI bus> on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x1166, dev=0x0104, revid=0xb2 domain=0, bus=1, slot=13, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0016, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x02 (500 ns) found-> vendor=0x1166, dev=0x024a, revid=0x00 domain=0, bus=1, slot=14, func=0 class=01-04-05, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[10]: type I/O Port, range 32, base 0xbc00, size 3, enabled pcib1: requested I/O range 0xbc00-0xbc07: in range map[14]: type I/O Port, range 32, base 0xb880, size 2, enabled pcib1: requested I/O range 0xb880-0xb883: in range map[18]: type I/O Port, range 32, base 0xb800, size 3, enabled pcib1: requested I/O range 0xb800-0xb807: in range map[1c]: type I/O Port, range 32, base 0xb480, size 2, enabled pcib1: requested I/O range 0xb480-0xb483: in range map[20]: type I/O Port, range 32, base 0xb400, size 5, enabled pcib1: requested I/O range 0xb400-0xb41f: in range map[24]: type Memory, range 32, base 0xfc9fe000, size 13, enabled pcib1: requested memory range 0xfc9fe000-0xfc9fffff: good pcib1: matched entry for 1.14.INTA pcib1: slot 14 INTA hardwired to IRQ 11 ioapic0: Changing trigger for pin 11 to level ioapic0: Changing polarity for pin 11 to low pcib2: <ACPI PCI-PCI bridge> at device 13.0 on pci1 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0x0-0x0 pcib2: no prefetched decode pci2: <ACPI PCI bus> on pcib2 pci2: domain=0, physical bus=2 atapci0: <ServerWorks HT1000 SATA150 controller> port 0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb807,0xb480-0xb483,0xb400-0xb41f mem 0xfc9fe000-0xfc9fffff irq 11 at device 14.0 on pci1 ioapic0: routing intpin 11 (ISA IRQ 11) to lapic 0 vector 49 ata2: <ATA channel 0> on atapci0 ata3: <ATA channel 1> on atapci0 ata4: <ATA channel 2> on atapci0 ata5: <ATA channel 3> on atapci0 atapci1: <ServerWorks HT1000 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 2.1 on pci0 ata0: <ATA channel 0> on atapci1 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 50 ata1: <ATA channel 1> on atapci1 ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 51 isab0: <PCI-ISA bridge> at device 2.2 on pci0 isa0: <ISA bus> on isab0 ohci0: <OHCI (generic) USB controller> port 0xe800-0xe8ff mem 0xfebfa000-0xfebfafff irq 10 at device 3.0 on pci0 ohci0: usbpf attached ohci0: (New OHCI DeviceId=0x02231166) ioapic0: routing intpin 10 (ISA IRQ 10) to lapic 0 vector 52 usbus0: <OHCI (generic) USB controller> on ohci0 ohci1: <OHCI (generic) USB controller> port 0xd800-0xd8ff mem 0xfebf9000-0xfebf9fff irq 10 at device 3.1 on pci0 ohci1: usbpf attached ohci1: (New OHCI DeviceId=0x02231166) usbus1: <OHCI (generic) USB controller> on ohci1 ehci0: <EHCI (generic) USB 2.0 controller> port 0xd400-0xd4ff mem 0xfebf8000-0xfebf8fff irq 10 at device 3.2 on pci0 ehci0: usbpf attached ehci0: (New EHCI DeviceId=0x02231166) usbus2: EHCI version 1.0 usbus2: <EHCI (generic) USB 2.0 controller> on ehci0 vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xfd000000-0xfdffffff,0xfebff000-0xfebfffff irq 28 at device 5.0 on pci0 pcib3: <ACPI PCI-PCI bridge> at device 8.0 on pci0 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0x0-0x0 pcib3: no prefetched decode pci3: <ACPI PCI bus> on pcib3 pci3: domain=0, physical bus=3 pcib4: <ACPI PCI-PCI bridge> at device 9.0 on pci0 pcib4: domain 0 pcib4: secondary bus 4 pcib4: subordinate bus 4 pcib4: I/O decode 0x0-0x0 pcib4: memory decode 0xfca00000-0xfcafffff pcib4: prefetched decode 0xff500000-0xff5fffff pci4: <ACPI PCI bus> on pcib4 pci4: domain=0, physical bus=4 found-> vendor=0x14e4, dev=0x166a, revid=0x03 domain=0, bus=4, slot=4, func=0 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0116, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) intpin=a, irq=9 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type Memory, range 64, base 0xfcaf0000, size 16, enabled pcib4: requested memory range 0xfcaf0000-0xfcafffff: good map[18]: type Memory, range 64, base 0xfcae0000, size 16, enabled pcib4: requested memory range 0xfcae0000-0xfcaeffff: good pcib4: matched entry for 4.4.INTA pcib4: slot 4 INTA hardwired to IRQ 17 found-> vendor=0x14e4, dev=0x166a, revid=0x03 domain=0, bus=4, slot=4, func=1 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0116, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type Memory, range 64, base 0xfcad0000, size 16, enabled pcib4: requested memory range 0xfcad0000-0xfcadffff: good map[18]: type Memory, range 64, base 0xfcac0000, size 16, enabled pcib4: requested memory range 0xfcac0000-0xfcacffff: good pcib4: matched entry for 4.4.INTB pcib4: slot 4 INTB hardwired to IRQ 19 pci0:4:4:0: bad VPD cksum, remain 14 bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x008003> mem 0xfcaf0000-0xfcafffff,0xfcae0000-0xfcaeffff irq 17 at device 4.0 on pci4 bge0: attempting to allocate 1 MSI vectors (8 supported) msi: routing MSI IRQ 256 to local APIC 0 vector 56 bge0: using IRQ 256 for MSI bge0: CHIP ID 0x00008003; ASIC REV 0x08; CHIP REV 0x80; PCI-X miibus0: <MII bus> on bge0 brgphy0: <BCM5780 10/100/1000baseTX PHY> PHY 1 on miibus0 brgphy0: OUI 0x000818, model 0x0035, rev. 0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: bpf attached bge0: Ethernet address: 00:xx:xx:xx:xx:xx pci0:4:4:1: bad VPD cksum, remain 14 bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x008003> mem 0xfcad0000-0xfcadffff,0xfcac0000-0xfcacffff irq 19 at device 4.1 on pci4 bge1: attempting to allocate 1 MSI vectors (8 supported) msi: routing MSI IRQ 257 to local APIC 0 vector 64 bge1: using IRQ 257 for MSI bge1: CHIP ID 0x00008003; ASIC REV 0x08; CHIP REV 0x80; PCI-X miibus1: <MII bus> on bge1 brgphy1: <BCM5780 10/100/1000baseTX PHY> PHY 1 on miibus1 brgphy1: OUI 0x000818, model 0x0035, rev. 0 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge1: bpf attached bge1: Ethernet address: 00:xx:xx:xx:xx:xx pcib5: <ACPI PCI-PCI bridge> at device 10.0 on pci0 pcib5: domain 0 pcib5: secondary bus 5 pcib5: subordinate bus 5 pcib5: I/O decode 0x0-0x0 pcib5: no prefetched decode pci5: <ACPI PCI bus> on pcib5 pci5: domain=0, physical bus=5 pcib6: <ACPI PCI-PCI bridge> at device 11.0 on pci0 pcib6: domain 0 pcib6: secondary bus 6 pcib6: subordinate bus 6 pcib6: I/O decode 0x0-0x0 pcib6: no prefetched decode pci6: <ACPI PCI bus> on pcib6 pci6: domain=0, physical bus=6 pcib7: <ACPI PCI-PCI bridge> at device 12.0 on pci0 pcib7: domain 0 pcib7: secondary bus 7 pcib7: subordinate bus 7 pcib7: I/O decode 0x0-0x0 pcib7: no prefetched decode pci7: <ACPI PCI bus> on pcib7 pci7: domain=0, physical bus=7 pcib8: <ACPI PCI-PCI bridge> at device 13.0 on pci0 pcib8: domain 0 pcib8: secondary bus 8 pcib8: subordinate bus 8 pcib8: I/O decode 0x0-0x0 pcib8: no prefetched decode pcib8: could not get PCI interrupt routing table for \\_SB_.PCI0.BR46 - AE_NOT_FOUND pci8: <ACPI PCI bus> on pcib8 pci8: domain=0, physical bus=8 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 53 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s) ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 54 Event timer "RTC" frequency 32768 Hz quality 0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 55 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 73 ioapic0: routing intpin 6 (ISA IRQ 6) to lapic 0 vector 57 fd0: <1440-KB 3.5" drive> on fdc0 drive 0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 58 uart0: fast interrupt uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 59 uart1: fast interrupt acpi0: wakeup code va 0xffffff8000184000 pa 0x4000 ex_isa_identify() ahc_isa_probe 0: ioport 0xc00 alloc failed ahc_isa_probe 11: ioport 0xbc00 alloc failed isa_probe_children: disabling PnP devices atkbdc: atkbdc0 already exists; skipping it atrtc: atrtc0 already exists; skipping it fdc: fdc0 already exists; skipping it sc: sc0 already exists; skipping it uart: uart0 already exists; skipping it uart: uart1 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc9fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: cannot reserve I/O port range ppc0: <Parallel port> failed to probe at irq 7 on isa0 isa_probe_children: probing PnP devices powernow0: <Cool`n'Quiet K8> on cpu0 powernow0: STATUS: 0x4060604101010 powernow0: STATUS: maxfid: 0x10 powernow0: STATUS: maxvid: 0x04 device_attach: powernow0 attach returned 6 powernow1: <Cool`n'Quiet K8> on cpu1 powernow1: STATUS: 0x4060604101010 powernow1: STATUS: maxfid: 0x10 powernow1: STATUS: maxvid: 0x04 device_attach: powernow1 attach returned 6 Device configuration finished. procfs registered Timecounter "TSC" frequency 2394052032 Hz quality -100 lapic: Divisor 2, Frequency 99752186 Hz Timecounters tick every 1.000 msec vlan: initialized, using hash tables with chaining lo0: bpf attached hptrr: no controller detected. ata2: SATA connect time=0ms status=00000113 ata2: reset tp1 mask=01 ostat0=50 ostat1=00 ata2: stat0=0xd0 err=0x00 lsb=0x01 msb=0x0c ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1 ata3: SATA connect time=0ms status=00000113 ata3: reset tp1 mask=01 ostat0=50 ostat1=00 ata3: stat0=0xd0 err=0x00 lsb=0x10 msb=0x00 ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata3: reset tp2 stat0=50 stat1=00 devices=0x1 ata4: SATA connect time=0ms status=00000113 ata4: reset tp1 mask=01 ostat0=50 ostat1=00 ata4: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata4: reset tp2 stat0=50 stat1=00 devices=0x1 ata5: SATA connect time=0ms status=00000113 ata5: reset tp1 mask=01 ostat0=50 ostat1=00 ata5: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata5: reset tp2 stat0=50 stat1=00 devices=0x1 ata0: reset tp1 mask=02 ostat0=ff ostat1=50 ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: reset tp2 stat0=00 stat1=00 devices=0x20000 (aprobe0:ata2:0:0:0): SIGNATURE: 0000 (aprobe1:ata3:0:0:0): SIGNATURE: 0000 (aprobe2:ata4:0:0:0): SIGNATURE: 0000 (aprobe3:ata5:0:0:0): SIGNATURE: 0000 (aprobe4:ata0:0:1:0): SIGNATURE: eb14 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ada0 at ata2 bus 0 scbus0 target 0 lun 0(cd0:ata0:0:1:0): SCSI status error (cd0:ata0:0:1:0): Requesting SCSI sense data ada0: <ST3200826AS 3.02> ATA-7 SATA 1.x device(cd0:ata0:0:1:0): SCSI status error (cd0:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (cd0:ata0:0:1:0): CAM status: SCSI Status Error (cd0:ata0:0:1:0): SCSI status: Check Condition (cd0:ata0:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) (cd0:ata0:0:1:0): Error 6, Unretryable error cd0 at ata0 bus 0 scbus4 target 1 lun 0 cd0: <MATSHITA DVD-ROM SR-8178 PZ16> Removable CD-ROM SCSI-0 device cd0: 66.700MB/s transfers (UDMA4, ATAPI 12bytes, PIO 65534bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present ada0: Serial Number 3ND0D8MG ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) ada0: 190782MB (390721968 512 byte sectors: 16H 63S/T 16383C)ugen0.1: <0x1166> at usbus0 uhub0: <0x1166 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <0x1166> at usbus1 uhub1: <0x1166 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <0x1166> at usbus2 uhub2: <0x1166 EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ada1 at ata3 bus 0 scbus1 target 0 lun 0 ada1: <ST3200826AS 3.02> ATA-7 SATA 1.x device ada1: Serial Number 3ND09XDA ada1: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) ada1: 190782MB (390721968 512 byte sectors: 16H 63S/T 16383C) ada2 at ata4 bus 0 scbus2 target 0 lun 0 ada2: <WDC WD1500ADFD-00NLR1 20.07P20> ATA-7 SATA 1.x device ada2: Serial Number WD-WMAP41419538 ada2: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) ada2: 143089MB (293046768 512 byte sectors: 16H 63S/T 16383C) ada3 at ata5 bus 0 scbus3 target 0 lun 0 ada3: <WDC WD1500ADFD-00NLR1 20.07P20> ATA-7 SATA 1.x device ada3: Serial Number WD-WMAP41429759 ada3: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) ada3: 143089MB (293046768 512 byte sectors: 16H 63S/T 16383C) pass0 at ata2 bus 0 scbus0 target 0 lun 0 pass0: <ST3200826AS 3.02> ATA-7 SATA 1.x device pass0: Serial Number 3ND0D8MG pass0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) pass1 at ata3 bus 0 scbus1 target 0 lun 0 pass1: <ST3200826AS 3.02> ATA-7 SATA 1.x device pass1: Serial Number 3ND09XDA pass1: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) pass2 at ata4 bus 0 scbus2 target 0 lun 0 pass2: <WDC WD1500ADFD-00NLR1 20.07P20> ATA-7 SATA 1.x device pass2: Serial Number WD-WMAP41419538 pass2: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) pass3 at ata5 bus 0 scbus3 target 0 lun 0 pass3: <WDC WD1500ADFD-00NLR1 20.07P20> ATA-7 SATA 1.x device pass3: Serial Number WD-WMAP41429759 pass3: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) pass4 at ata0 bus 0 scbus4 target 1 lun 0 pass4: <MATSHITA DVD-ROM SR-8178 PZ16> Removable CD-ROM SCSI-0 device pass4: 66.700MB/s transfers (UDMA4, ATAPI 12bytes, PIO 65534bytes) ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00040010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00000000 err: 0x000000f0 pmc: 0x00010400 ioapic0: routing intpin 1 (CPU1: local APIC error 0x80ISA IRQ 1 ) to lapic 1 vector 48 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 1 vector 49 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 1 vector 50 ioapic0: routing intpin 11 (ISA IRQ 11) to lapic 1 vector 51 ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 1 vector 52 msi: Assigning MSI IRQ 257 to local APIC 1 vector 53 WARNING: WITNESS option enabled, expect reduced performance. uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered GEOM: new disk cd0 GEOM: new disk ada0 GEOM: new disk ada1 GEOM: new disk ada2 GEOM: new disk ada3 (cd0:ata0:0:1:0): SCSI status error (cd0:ata0:0:1:0): Requesting SCSI sense data (cd0:ata0:0:1:0): SCSI status error (cd0:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (cd0:ata0:0:1:0): CAM status: SCSI Status Error (cd0:ata0:0:1:0): SCSI status: Check Condition (cd0:ata0:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) (cd0:ata0:0:1:0): Error 6, Unretryable error (cd0:ata0:0:1:0): SCSI status error (cd0:ata0:0:1:0): Requesting SCSI sense data (cd0:ata0:0:1:0): SCSI status error (cd0:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (cd0:ata0:0:1:0): CAM status: SCSI Status Error (cd0:ata0:0:1:0): SCSI status: Check Condition (cd0:ata0:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) (cd0:ata0:0:1:0): Error 6, Unretryable error Root mount waiting for: usbus2 uhub2: 4 ports with 4 removable, self powered Trying to mount root from ufs:/dev/ada0s1a [rw]... ct_to_ts([2010-11-24 12:29:21]) = 1290601761.000000000 start_init: trying /sbin/init bge1: link state changed to UP Nov 24 12:36:15 butter kernel: ata4: SATA connect time=0ms status=00000113 Nov 24 12:36:15 butter kernel: ata4: reset tp1 mask=01 ostat0=d0 ostat1=00 Nov 24 12:36:15 butter kernel: ata4: stat0=0xd0 err=0x00 lsb=0x54 msb=0x02 Nov 24 12:36:15 butter last message repeated 309 times Nov 24 12:36:15 butter kernel: ata4: reset tp2 stat0=d0 stat1=00 devices=0x0 Nov 24 12:36:15 butter kernel: (ada2:ata4:0:0:0): Command timed out Nov 24 12:36:15 butter kernel: (ada2:ata4:0:0:0): Retrying command Nov 24 12:36:15 butter kernel: (pass2:ata4:0:0:0): lost device Nov 24 12:36:15 butter kernel: (pass2:ata4:0:0:0): removing device entry Nov 24 12:36:15 butter kernel: (ada2:ata4:0:0:0): lost device Nov 24 12:36:15 butter kernel: (ada2:ata4:0:0:0): Invalidating pack Nov 24 12:36:15 butter kernel: (ada2:ata4:0:0:0): Synchronize cache failed Nov 24 12:36:15 butter kernel: (ada2:ata4:0:0:0): removing device entry Nov 24 12:36:15 butter kernel: Looks like I'll be sticking with ATA_CAM.Received on Wed Nov 24 2010 - 16:43:13 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:09 UTC