> Roger Hammerstein wrote: > > And then wait 30 seconds to a minute. > > I get a bunch of g_vfs_done():ad8[write(offset=146023743488,length=16384)]error=6 > > This part look suspicious. ENXIO may mean that device disappeared. Shown > "use after free" panic also may tell the same. Could you boot with > verbose kernel messages and repeat it again? It would be interesting to > get some prehistory of what's going on. > > This may be result of some hardware issue, not properly handled by > software. Error recovery is not a best point of old ata(4). You could > try to switch to CAM-based ATA using ATA_CAM kernel option. It probably > won't fix original problem, but it better handles situations with > disappearing devices and may give more ideas. Thank you all for the replies. Will try ATA_CAM shortly. Google does have some results for firmware and raptor drives giving errors/causing problems. For kicks, I booted a recent Ubuntu install, and copying /usr/src/linux to that disk caused errors in the kernel log, but the disk was still usable and linux did not panic. Here's the dmesg detection and the errors from ubuntu. root_at_linux-desktop:/c/k# dmesg | grep ata3 [ 0.899555] ata3: SATA max UDMA/133 mmio m8192_at_0xfc9fe000 port 0xfc9fe200 irq 11 [ 1.896040] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.904823] ata3.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 [ 1.904903] ata3.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.920839] ata3.00: configured for UDMA/133 [51657.988039] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x40000000 action 0x6 frozen [51657.988117] ata3: SError: { } [51657.988149] ata3.00: cmd ca/00:88:6f:80:06/00:00:00:00:00/eb tag 0 dma 69632 out [51657.988252] ata3.00: status: { DRDY } [51657.988284] ata3: hard resetting link [51658.308042] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [51658.332842] ata3.00: configured for UDMA/133 [51658.332846] ata3.00: device reported invalid CHS sector 0 [51658.332852] ata3: EH complete [51730.988037] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x40000000 action 0x6 frozen [51730.988096] ata3: SError: { } [51730.988128] ata3.00: cmd ca/00:10:57:ce:0f/00:00:00:00:00/e0 tag 0 dma 8192 out [51730.988231] ata3.00: status: { DRDY } [51730.988263] ata3: hard resetting link [51731.532040] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [51731.556831] ata3.00: configured for UDMA/133 [51731.556835] ata3.00: device reported invalid CHS sector 0 [51731.556840] ata3: EH complete root_at_linux-desktop:/c/k# This is the messages file from a verbose boot and the panic: Nov 23 15:22:18 butter kernel: --- trap 0, rip = 0, rsp = 0xffffff80001b4cf0, rbp = 0 --- Nov 23 15:30:35 butter kernel: ata4: reiniting channel .. Nov 23 15:30:35 butter kernel: ata4: SATA connect time=0ms status=00000113 Nov 23 15:30:35 butter kernel: ata4: reset tp1 mask=01 ostat0=d0 ostat1=00 Nov 23 15:30:35 butter kernel: ata4: stat0=0xd0 err=0x00 lsb=0x70 msb=0x02 Nov 23 15:31:06 butter last message repeated 305 times Nov 23 15:37:28 butter syslogd: kernel boot file is /boot/kernel/kernel Nov 23 15:37:28 butter kernel: ata4: reset tp2 stat0=d0 stat1=00 devices=0x0 Nov 23 15:37:28 butter kernel: ata4: reinit done .. Nov 23 15:37:28 butter kernel: Nov 23 15:37:28 butter kernel: Nov 23 15:37:28 butter kernel: Fatal trap 9: general protection fault while in kernel mode Nov 23 15:37:28 butter kernel: cpuid = 0; apic id = 00 Nov 23 15:37:28 butter kernel: instruction pointer = 0x20:0xffffffff805f9f61 Nov 23 15:37:28 butter kernel: stack pointer = 0x28:0xffffff8000057970 Nov 23 15:37:28 butter kernel: frame pointer = 0x28:0xffffff80000579a0 Nov 23 15:37:28 butter kernel: code segment = base 0x0, limit 0xfffff, type 0x1b Nov 23 15:37:28 butter kernel: = DPL 0, pres 1, long 1, def32 0, gran 1 Nov 23 15:37:28 butter kernel: processor eflags = interrupt enabled, resume, IOPL = 0 Nov 23 15:37:28 butter kernel: current process = 12 (swi6: task queue) Nov 23 15:37:28 butter kernel: panic: from debugger Nov 23 15:37:28 butter kernel: cpuid = 0 Nov 23 15:37:28 butter kernel: Uptime: 18m21s (kgdb) bt #0 doadump () at /usr/src/sys/kern/kern_shutdown.c:250 #1 0xffffffff805cf2d7 in kern_reboot (howto=260) at /usr/src/sys/kern/kern_shutdown.c:418 #2 0xffffffff805cf761 in panic (fmt=Variable "fmt" is not available. ) at /usr/src/sys/kern/kern_shutdown.c:591 #3 0xffffffff801e5147 in db_panic (addr=Variable "addr" is not available. ) at /usr/src/sys/ddb/db_command.c:478 #4 0xffffffff801e55f1 in db_command (last_cmdp=0xffffffff80c90fc0, cmd_table=Variable "cmd_table" is not available. ) at /usr/src/sys/ddb/db_command.c:445 #5 0xffffffff801e5840 in db_command_loop () at /usr/src/sys/ddb/db_command.c:498 #6 0xffffffff801e78a9 in db_trap (type=Variable "type" is not available. ) at /usr/src/sys/ddb/db_main.c:229 #7 0xffffffff806037de in kdb_trap (type=9, code=0, tf=0xffffff80000578c0) at /usr/src/sys/kern/subr_kdb.c:546 #8 0xffffffff808c9c5d in trap_fatal (frame=0xffffff80000578c0, eva=Variable "eva" is not available. ) at /usr/src/sys/amd64/amd64/trap.c:828 #9 0xffffffff808ca225 in trap (frame=0xffffff80000578c0) at /usr/src/sys/amd64/amd64/trap.c:644 #10 0xffffffff808b4804 in calltrap () at /usr/src/sys/amd64/amd64/exception.S:228 #11 0xffffffff805f9f61 in devclass_get_name (dc=0xdeadc0dedeadc0de) at /usr/src/sys/kern/subr_bus.c:1291 #12 0xffffffff805fa4f9 in device_print_prettyname (dev=0xffffff0002635b00) at /usr/src/sys/kern/subr_bus.c:2235 #13 0xffffffff805fcc32 in device_printf (dev=Variable "dev" is not available. ) at /usr/src/sys/kern/subr_bus.c:2255 #14 0xffffffff8027fe9e in ata_completed (context=Variable "context" is not available. ) at /usr/src/sys/dev/ata/ata-queue.c:298 #15 0xffffffff806105b3 in taskqueue_run_locked (queue=0xffffff000278d280) at /usr/src/sys/kern/subr_taskqueue.c:245 #16 0xffffffff806106fd in taskqueue_run (queue=0xffffff000278d280) at /usr/src/sys/kern/subr_taskqueue.c:259 #17 0xffffffff805a8116 in intr_event_execute_handlers (p=Variable "p" is not available. ) at /usr/src/sys/kern/kern_intr.c:1220 #18 0xffffffff805a8e92 in ithread_loop (arg=0xffffff0002526800) at /usr/src/sys/kern/kern_intr.c:1233 #19 0xffffffff805a60da in fork_exit (callout=0xffffffff805a8de0 <ithread_loop>, arg=0xffffff0002526800, frame=0xffffff8000057c40) at /usr/src/sys/kern/kern_fork.c:835 #20 0xffffffff808b4cde in fork_trampoline () at /usr/src/sys/amd64/amd64/exception.S:570 #21 0x0000000000000000 in ?? () #22 0x0000000000000000 in ?? () #23 0x0000000000000001 in ?? () #24 0x0000000000000000 in ?? () #25 0x0000000000000000 in ?? () #26 0x0000000000000000 in ?? () #27 0x0000000000000000 in ?? () #28 0x0000000000000000 in ?? () #29 0x0000000000000000 in ?? () #30 0x0000000000000000 in ?? () #31 0x0000000000000000 in ?? () verbose boot message: Uptime: 7m11s Table 'FACP' at 0x7fff0290 Table 'APIC' at 0x7fff0390 APIC: Found table at 0x7fff0390 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 1: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 2: enabled SMP: Added CPU 1 (AP) MADT: Found CPU APIC ID 130 ACPI ID 3: disabled MADT: Found CPU APIC ID 131 ACPI ID 4: disabled Copyright (c) 1992-2010 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.0-CURRENT #0: Mon Nov 22 10:30:08 EST 2010 root_at_butter.local:/usr/obj/usr/src/sys/GENERIC amd64 WARNING: WITNESS option enabled, expect reduced performance. Table 'FACP' at 0x7fff0290 Table 'APIC' at 0x7fff0390 Table 'OEMB' at 0x7fffe040 Table 'SRAT' at 0x7fff41d0 SRAT: Found table at 0x7fff41d0 SRAT: Found CPU APIC ID 0 domain 0: enabled SRAT: Found CPU APIC ID 1 domain 1: enabled SRAT: Found CPU APIC ID 2 domain 2: disabled SRAT: Found CPU APIC ID 3 domain 3: disabled SRAT: Found memory domain 0 addr 100000 len 3ff00000: enabled SRAT: Found memory domain 1 addr 40000000 len 40000000: enabled SRAT: Found memory domain 2 addr 0 len 0: disabled SRAT: Found memory domain 3 addr 0 len 0: disabled SRAT: Found memory domain 0 addr 0 len 0: disabled SRAT: Found memory domain 0 addr 0 len 9fc00: enabled SRAT: No memory region found for 10fb000 - 7ffe0000 Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff810cd000. Calibrating TSC clock ... TSC clock: 2394058013 Hz CPU: AMD Opteron(tm) Processor 250 (2394.06-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x20f51 Family = f Model = 25 Stepping = 1 Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> Features2=0x1<SSE3> AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!> AMD Features2=0x1<LAHF> L1 2MB data TLB: 8 entries, fully associative L1 2MB instruction TLB: 8 entries, fully associative L1 4KB data TLB: 32 entries, fully associative L1 4KB instruction TLB: 32 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 2MB unified TLB: 0 entries, disabled/not present L2 4KB data TLB: 512 entries, 4-way associative L2 4KB instruction TLB: 512 entries, 4-way associative L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative WARNING: This architecture revision has known SMP hardware bugs which may cause random instability real memory = 2147483648 (2048 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages) 0x00000000010fb000 - 0x000000007c38ffff, 2066305024 bytes (504469 pages) avail memory = 2050400256 (1955 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <A M I OEMAPIC > INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 2 package(s) x 1 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 2 x86bios: IVT 0x000000-0x0004ff at 0xffffff0000000000 x86bios: SSEG 0x001000-0x001fff at 0xffffff800000d000 x86bios: EBDA 0x09f000-0x09ffff at 0xffffff000009f000 x86bios: ROM 0x0a0000-0x0fefff at 0xffffff00000a0000 ULE: setup cpu 0 ULE: setup cpu 1 ACPI: RSDP 0xf9cd0 00024 (v02 ACPIAM) ACPI: XSDT 0x7fff0100 00044 (v01 A M I OEMXSDT 06000630 MSFT 00000097) ACPI: FACP 0x7fff0290 000F4 (v03 A M I OEMFACP 06000630 MSFT 00000097) ACPI: DSDT 0x7fff0410 03DBD (v01 0ABGZ 0ABGZ005 00000005 INTL 02002026) ACPI: FACS 0x7fffe000 00040 ACPI: APIC 0x7fff0390 00080 (v01 A M I OEMAPIC 06000630 MSFT 00000097) ACPI: OEMB 0x7fffe040 00056 (v01 A M I AMI_OEM 06000630 MSFT 00000097) ACPI: SRAT 0x7fff41d0 00160 (v01 A M I OEMSRAT 06000630 MSFT 00000097) MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 MADT: Found IO APIC ID 3, Interrupt 16 at 0xfec01000 MADT: Found IO APIC ID 4, Interrupt 32 at 0xfec02000 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high MADT: Forcing active-low polarity and level trigger for SCI ioapic0: intpin 9 polarity: low ioapic0: intpin 9 trigger: level ioapic0 <Version 1.1> irqs 0-15 on motherboard ioapic1 <Version 1.1> irqs 16-31 on motherboard ioapic2 <Version 1.1> irqs 32-47 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00040010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00000000 err: 0x000000f0 pmc: 0x00010400 wlan: <802.11 Link Layer> kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> nfslock: pseudo-device null: <null device, zero device> random: <entropy source, Software, Yarrow> io: <I/O> hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 CPU0: local APIC error 0x80 acpi0: <A M I OEMXSDT> on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 ACPI: Executed 1 blocks of module-level executable AML code acpi0: Power Button (fixed) acpi0: Sleep Button (fixed) acpi0: reservation of 540, 20 (4) failed acpi0: reservation of 500, 20 (4) failed acpi0: reservation of 560, 20 (4) failed acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 7ff00000 (3) failed ACPI timer: 0/4 0/4 0/4 0/4 0/3 0/4 0/4 0/3 0/4 0/4 -> 0 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu0: switching to generic Cx mode cpu1: <ACPI CPU> on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 9 10 11 12 14 15 Validation 0 255 N 0 3 4 5 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 9 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 9 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 5 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link8: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link9: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link10: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link11: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link12: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 10 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link13: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link14: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link15: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link16: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link17: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link18: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link19: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link20: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link21: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link22: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link23: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link24: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link25: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link26: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link27: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link28: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link29: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link30: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 9 10 11 12 14 15 pci_link31: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 10 Validation 0 10 N 0 10 After Disable 0 255 N 0 10 pci_link32: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 11 Validation 0 11 N 0 11 After Disable 0 255 N 0 11 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x1166, dev=0x0036, revid=0x00 domain=0, bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0205, revid=0x00 domain=0, bus=0, slot=2, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0107, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0214, revid=0x00 domain=0, bus=0, slot=2, func=1 class=01-01-8a, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0200, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type I/O Port, range 32, base 0xffa0, size 4, enabled found-> vendor=0x1166, dev=0x0234, revid=0x00 domain=0, bus=0, slot=2, func=2 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0107, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0223, revid=0x01 domain=0, bus=0, slot=3, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xfebfa000, size 12, enabled map[14]: type I/O Port, range 32, base 0xe800, size 8, enabled pcib0: matched entry for 0.3.INTA pcib0: slot 3 INTA hardwired to IRQ 10 ioapic0: Changing trigger for pin 10 to level ioapic0: Changing polarity for pin 10 to low ohci early: SMM active, request owner change found-> vendor=0x1166, dev=0x0223, revid=0x01 domain=0, bus=0, slot=3, func=1 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xfebf9000, size 12, enabled map[14]: type I/O Port, range 32, base 0xd800, size 8, enabled pcib0: matched entry for 0.3.INTA pcib0: slot 3 INTA hardwired to IRQ 10 ohci early: SMM active, request owner change found-> vendor=0x1166, dev=0x0223, revid=0x01 domain=0, bus=0, slot=3, func=2 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfebf8000, size 12, enabled map[14]: type I/O Port, range 32, base 0xd400, size 8, enabled pcib0: matched entry for 0.3.INTA pcib0: slot 3 INTA hardwired to IRQ 10 found-> vendor=0x1002, dev=0x4752, revid=0x27 domain=0, bus=0, slot=5, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0087, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfd000000, size 24, enabled map[14]: type I/O Port, range 32, base 0xe000, size 8, enabled map[18]: type Memory, range 32, base 0xfebff000, size 12, enabled pcib0: matched entry for 0.5.INTA pcib0: slot 5 INTA hardwired to IRQ 28 found-> vendor=0x1166, dev=0x0130, revid=0xa3 domain=0, bus=0, slot=8, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0130, revid=0xa3 domain=0, bus=0, slot=9, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0132, revid=0xa3 domain=0, bus=0, slot=10, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0132, revid=0xa3 domain=0, bus=0, slot=11, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0132, revid=0xa3 domain=0, bus=0, slot=12, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0132, revid=0xa3 domain=0, bus=0, slot=13, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1100, revid=0x00 domain=0, bus=0, slot=24, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1101, revid=0x00 domain=0, bus=0, slot=24, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1102, revid=0x00 domain=0, bus=0, slot=24, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1103, revid=0x00 domain=0, bus=0, slot=24, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1100, revid=0x00 domain=0, bus=0, slot=25, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1101, revid=0x00 domain=0, bus=0, slot=25, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1102, revid=0x00 domain=0, bus=0, slot=25, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1103, revid=0x00 domain=0, bus=0, slot=25, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 2 pcib1: I/O decode 0xa000-0xbfff pcib1: memory decode 0xfc900000-0xfc9fffff pcib1: no prefetched decode pci1: <ACPI PCI bus> on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x1166, dev=0x0104, revid=0xb2 domain=0, bus=1, slot=13, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0016, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x02 (500 ns) found-> vendor=0x1166, dev=0x024a, revid=0x00 domain=0, bus=1, slot=14, func=0 class=01-04-05, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[10]: type I/O Port, range 32, base 0xbc00, size 3, enabled pcib1: requested I/O range 0xbc00-0xbc07: in range map[14]: type I/O Port, range 32, base 0xb880, size 2, enabled pcib1: requested I/O range 0xb880-0xb883: in range map[18]: type I/O Port, range 32, base 0xb800, size 3, enabled pcib1: requested I/O range 0xb800-0xb807: in range map[1c]: type I/O Port, range 32, base 0xb480, size 2, enabled pcib1: requested I/O range 0xb480-0xb483: in range map[20]: type I/O Port, range 32, base 0xb400, size 5, enabled pcib1: requested I/O range 0xb400-0xb41f: in range map[24]: type Memory, range 32, base 0xfc9fe000, size 13, enabled pcib1: requested memory range 0xfc9fe000-0xfc9fffff: good pcib1: matched entry for 1.14.INTA pcib1: slot 14 INTA hardwired to IRQ 11 ioapic0: Changing trigger for pin 11 to level ioapic0: Changing polarity for pin 11 to low pcib2: <ACPI PCI-PCI bridge> at device 13.0 on pci1 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0x0-0x0 pcib2: no prefetched decode pci2: <ACPI PCI bus> on pcib2 pci2: domain=0, physical bus=2 atapci0: <ServerWorks HT1000 SATA150 controller> port 0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb807,0xb480-0xb483,0xb400-0xb41f mem 0xfc9fe000-0xfc9fffff irq 11 at device 14.0 on pci1 ioapic0: routing intpin 11 (ISA IRQ 11) to lapic 0 vector 49 ata2: <ATA channel 0> on atapci0 ata2: SATA connect time=0ms status=00000113 ata2: reset tp1 mask=01 ostat0=50 ostat1=00 ata2: stat0=0xd0 err=0x00 lsb=0x01 msb=0x0c ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1 ata3: <ATA channel 1> on atapci0 ata3: SATA connect time=0ms status=00000113 ata3: reset tp1 mask=01 ostat0=50 ostat1=00 ata3: stat0=0xd0 err=0x00 lsb=0x10 msb=0x00 ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata3: reset tp2 stat0=50 stat1=00 devices=0x1 ata4: <ATA channel 2> on atapci0 ata4: SATA connect time=0ms status=00000113 ata4: reset tp1 mask=01 ostat0=50 ostat1=00 ata4: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata4: reset tp2 stat0=50 stat1=00 devices=0x1 ata5: <ATA channel 3> on atapci0 ata5: SATA connect time=0ms status=00000113 ata5: reset tp1 mask=01 ostat0=50 ostat1=00 ata5: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata5: reset tp2 stat0=50 stat1=00 devices=0x1 atapci1: <ServerWorks HT1000 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 2.1 on pci0 ata0: <ATA channel 0> on atapci1 ata0: reset tp1 mask=02 ostat0=ff ostat1=50 ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: reset tp2 stat0=00 stat1=00 devices=0x20000 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 50 ata1: <ATA channel 1> on atapci1 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 51 isab0: <PCI-ISA bridge> at device 2.2 on pci0 isa0: <ISA bus> on isab0 ohci0: <OHCI (generic) USB controller> port 0xe800-0xe8ff mem 0xfebfa000-0xfebfafff irq 10 at device 3.0 on pci0 ohci0: usbpf attached ohci0: (New OHCI DeviceId=0x02231166) ioapic0: routing intpin 10 (ISA IRQ 10) to lapic 0 vector 52 usbus0: <OHCI (generic) USB controller> on ohci0 ohci1: <OHCI (generic) USB controller> port 0xd800-0xd8ff mem 0xfebf9000-0xfebf9fff irq 10 at device 3.1 on pci0 ohci1: usbpf attached ohci1: (New OHCI DeviceId=0x02231166) usbus1: <OHCI (generic) USB controller> on ohci1 ehci0: <EHCI (generic) USB 2.0 controller> port 0xd400-0xd4ff mem 0xfebf8000-0xfebf8fff irq 10 at device 3.2 on pci0 ehci0: usbpf attached ehci0: (New EHCI DeviceId=0x02231166) usbus2: EHCI version 1.0 usbus2: <EHCI (generic) USB 2.0 controller> on ehci0 vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xfd000000-0xfdffffff,0xfebff000-0xfebfffff irq 28 at device 5.0 on pci0 pcib3: <ACPI PCI-PCI bridge> at device 8.0 on pci0 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0x0-0x0 pcib3: no prefetched decode pci3: <ACPI PCI bus> on pcib3 pci3: domain=0, physical bus=3 pcib4: <ACPI PCI-PCI bridge> at device 9.0 on pci0 pcib4: domain 0 pcib4: secondary bus 4 pcib4: subordinate bus 4 pcib4: I/O decode 0x0-0x0 pcib4: memory decode 0xfca00000-0xfcafffff pcib4: prefetched decode 0xff500000-0xff5fffff pci4: <ACPI PCI bus> on pcib4 pci4: domain=0, physical bus=4 found-> vendor=0x14e4, dev=0x166a, revid=0x03 domain=0, bus=4, slot=4, func=0 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0116, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) intpin=a, irq=9 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type Memory, range 64, base 0xfcaf0000, size 16, enabled pcib4: requested memory range 0xfcaf0000-0xfcafffff: good map[18]: type Memory, range 64, base 0xfcae0000, size 16, enabled pcib4: requested memory range 0xfcae0000-0xfcaeffff: good pcib4: matched entry for 4.4.INTA pcib4: slot 4 INTA hardwired to IRQ 17 found-> vendor=0x14e4, dev=0x166a, revid=0x03 domain=0, bus=4, slot=4, func=1 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0116, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type Memory, range 64, base 0xfcad0000, size 16, enabled pcib4: requested memory range 0xfcad0000-0xfcadffff: good map[18]: type Memory, range 64, base 0xfcac0000, size 16, enabled pcib4: requested memory range 0xfcac0000-0xfcacffff: good pcib4: matched entry for 4.4.INTB pcib4: slot 4 INTB hardwired to IRQ 19 pci0:4:4:0: bad VPD cksum, remain 14 bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x008003> mem 0xfcaf0000-0xfcafffff,0xfcae0000-0xfcaeffff irq 17 at device 4.0 on pci4 bge0: attempting to allocate 1 MSI vectors (8 supported) msi: routing MSI IRQ 256 to local APIC 0 vector 56 bge0: using IRQ 256 for MSI bge0: CHIP ID 0x00008003; ASIC REV 0x08; CHIP REV 0x80; PCI-X miibus0: <MII bus> on bge0 brgphy0: <BCM5780 10/100/1000baseTX PHY> PHY 1 on miibus0 brgphy0: OUI 0x000818, model 0x0035, rev. 0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: bpf attached bge0: Ethernet address: 00:xx:xx:xx:xx:xx pci0:4:4:1: bad VPD cksum, remain 14 bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x008003> mem 0xfcad0000-0xfcadffff,0xfcac0000-0xfcacffff irq 19 at device 4.1 on pci4 bge1: attempting to allocate 1 MSI vectors (8 supported) msi: routing MSI IRQ 257 to local APIC 0 vector 64 bge1: using IRQ 257 for MSI bge1: CHIP ID 0x00008003; ASIC REV 0x08; CHIP REV 0x80; PCI-X miibus1: <MII bus> on bge1 brgphy1: <BCM5780 10/100/1000baseTX PHY> PHY 1 on miibus1 brgphy1: OUI 0x000818, model 0x0035, rev. 0 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge1: bpf attached bge1: Ethernet address: 00:xx:xx:xx:xx:xx pcib5: <ACPI PCI-PCI bridge> at device 10.0 on pci0 pcib5: domain 0 pcib5: secondary bus 5 pcib5: subordinate bus 5 pcib5: I/O decode 0x0-0x0 pcib5: no prefetched decode pci5: <ACPI PCI bus> on pcib5 pci5: domain=0, physical bus=5 pcib6: <ACPI PCI-PCI bridge> at device 11.0 on pci0 pcib6: domain 0 pcib6: secondary bus 6 pcib6: subordinate bus 6 pcib6: I/O decode 0x0-0x0 pcib6: no prefetched decode pci6: <ACPI PCI bus> on pcib6 pci6: domain=0, physical bus=6 pcib7: <ACPI PCI-PCI bridge> at device 12.0 on pci0 pcib7: domain 0 pcib7: secondary bus 7 pcib7: subordinate bus 7 pcib7: I/O decode 0x0-0x0 pcib7: no prefetched decode pci7: <ACPI PCI bus> on pcib7 pci7: domain=0, physical bus=7 pcib8: <ACPI PCI-PCI bridge> at device 13.0 on pci0 pcib8: domain 0 pcib8: secondary bus 8 pcib8: subordinate bus 8 pcib8: I/O decode 0x0-0x0 pcib8: no prefetched decode pcib8: could not get PCI interrupt routing table for \\_SB_.PCI0.BR46 - AE_NOT_FOUND pci8: <ACPI PCI bus> on pcib8 pci8: domain=0, physical bus=8 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 53 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s) ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 54 Event timer "RTC" frequency 32768 Hz quality 0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 55 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 73 ioapic0: routing intpin 6 (ISA IRQ 6) to lapic 0 vector 57 fd0: <1440-KB 3.5" drive> on fdc0 drive 0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 58 uart0: fast interrupt uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 59 uart1: fast interrupt acpi0: wakeup code va 0xffffff8000184000 pa 0x4000 ex_isa_identify() ahc_isa_probe 0: ioport 0xc00 alloc failed ahc_isa_probe 11: ioport 0xbc00 alloc failed isa_probe_children: disabling PnP devices atkbdc: atkbdc0 already exists; skipping it atrtc: atrtc0 already exists; skipping it fdc: fdc0 already exists; skipping it sc: sc0 already exists; skipping it uart: uart0 already exists; skipping it uart: uart1 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc9fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: cannot reserve I/O port range ppc0: <Parallel port> failed to probe at irq 7 on isa0 isa_probe_children: probing PnP devices powernow0: <Cool`n'Quiet K8> on cpu0 powernow0: STATUS: 0x4060604101010 powernow0: STATUS: maxfid: 0x10 powernow0: STATUS: maxvid: 0x04 device_attach: powernow0 attach returned 6 powernow1: <Cool`n'Quiet K8> on cpu1 powernow1: STATUS: 0x4060604101010 powernow1: STATUS: maxfid: 0x10 powernow1: STATUS: maxvid: 0x04 device_attach: powernow1 attach returned 6 Device configuration finished. procfs registered Timecounter "TSC" frequency 2394058013 Hz quality -100 lapic: Divisor 2, Frequency 99752434 Hz Timecounters tick every 1.000 msec vlan: initialized, using hash tables with chaining lo0: bpf attached hptrr: no controller detected. ata0: Identifying devices: 00020000 ata0: New devices: 00020000 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=40 wire acd0: DMA limited to UDMA33, device found non-ATA66 cable acd0: setting UDMA33 acd0: <MATSHITADVD-ROM SR-8178/PZ16> DVDROM drive at ata0 as slave acd0: read 4125KB/s (4125KB/s), 256KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata1: Identifying devices: 00000000 ata1: New devices: 00000000 ata2: Identifying devices: 00000001 ata2: New devices: 00000001 ugen0.1: <0x1166> at usbus0 uhub0: <0x1166 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <0x1166> at usbus1 uhub1: <0x1166 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <0x1166> at usbus2 uhub2: <0x1166 EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad4: setting UDMA100 ad4: 190782MB <Seagate ST3200826AS 3.02> at ata2-master UDMA100 SATA 1.5Gb/s ad4: 390721968 sectors [387621C/16H/63S] 16 sectors/interrupt 1 depth queue ad4: Adaptec check1 failed ad4: LSI (v3) check1 failed ad4: LSI (v2) check1 failed ad4: FreeBSD check1 failed ata3: Identifying devices: 00000001 ata3: New devices: 00000001 ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad6: setting UDMA100 ad6: 190782MB <Seagate ST3200826AS 3.02> at ata3-master UDMA100 SATA 1.5Gb/s ad6: 390721968 sectors [387621C/16H/63S] 16 sectors/interrupt 1 depth queue ad6: Adaptec check1 failed ad6: LSI (v3) check1 failed ad6: LSI (v2) check1 failed ad6: FreeBSD check1 failed ata4: Identifying devices: 00000001 ata4: New devices: 00000001 ata4-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad8: setting UDMA100 ad8: 143089MB <WDC WD1500ADFD-00NLR1 20.07P20> at ata4-master UDMA100 SATA 1.5Gb/s ad8: 293046768 sectors [290721C/16H/63S] 16 sectors/interrupt 1 depth queue ad8: Adaptec check1 failed ad8: LSI (v3) check1 failed ad8: LSI (v2) check1 failed ad8: FreeBSD check1 failed ata5: Identifying devices: 00000001 ata5: New devices: 00000001 ata5-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad10: setting UDMA100 ad10: 143089MB <WDC WD1500ADFD-00NLR1 20.07P20> at ata5-master UDMA100 SATA 1.5Gb/s ad10: 293046768 sectors [290721C/16H/63S] 16 sectors/interrupt 1 depth queue ad10: Adaptec check1 failed ad10: LSI (v3) check1 failed ad10: LSI (v2) check1 failed ad10: FreeBSD check1 failed ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00040010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00000000 err: 0x000000f0 pmc: 0x00010400 ioapic0: routing intpin 1 (CPU1: local APIC error 0x80ISA IRQ 1 ) to lapic 1 vector 48 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 1 vector 49 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 1 vector 50 ioapic0: routing intpin 11 (ISA IRQ 11) to lapic 1 vector 51 ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 1 vector 52 msi: Assigning MSI IRQ 257 to local APIC 1 vector 53 WARNING: WITNESS option enabled, expect reduced performance. uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered GEOM: new disk ad4 GEOM: new disk ad6 GEOM: new disk ad8 GEOM: new disk ad10 Root mount waiting for: usbus2 uhub2: 4 ports with 4 removable, self powered Trying to mount root from ufs:/dev/ad4s1a [rw]... ct_to_ts([2010-11-23 15:12:47]) = 1290525167.000000000 start_init: trying /sbin/initReceived on Tue Nov 23 2010 - 19:55:13 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:09 UTC