Re: No disks usable on a P5NE MB

On Monday, July 25, 2011 6:14:12 pm Baptiste Daroussin wrote:
> On Mon, 25 Jul 2011 21:49:44 +0000, Baptiste Daroussin wrote:
> > On Mon, 25 Jul 2011 15:19:42 -0400, John Baldwin wrote:
> >> On Monday, July 25, 2011 2:42:59 pm Baptiste Daroussin wrote:
> >>> On Mon, 25 Jul 2011 13:09:04 -0400, John Baldwin wrote:
> >>> > On Sunday, July 24, 2011 9:48:02 am Baptiste Daroussin wrote:
> >>> >> Hi,
> >>> >>
> >>> >> Trying to upgrade one of my box from 8-stable to 9-current lead 
> >>> >> be to some important problems.
> >>> >>
> >>> >> I'm have tried both from sources (svn buildworld etc.) and from
> >>> >> memdisk provided by allbsd.org.
> >>> >>
> >>> >> The motherboard is ASUS P5N-E SLI ACPI BIOS Revision 0901
> >>> >>
> >>> >> more informations here :
> >>> >> http://people.freebsd.org/~bapt/P5N-E.dmidecode.txt and
> >>> >> http://people.freebsd.org/~bapt/P5N-E.pciconv.txt
> >>> >
> >>> > Can you get a verbose dmesg from 8-stable?
> >>>
> >>> A boot -v from current memdisk is full of:
> >>> (aprobe0:ata0:0:1:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 
> >>> 00
> >>> 00 00 00
> >>> (aprobe0:ata0:0:1:0): CAM status: Command timeout
> >>>
> >>> here is the dmesg from boot -v on 8-stable:
> >>> http://people.freebsd.org/~bapt/P5NE-dmesg-8-stable.txt
> >>>
> >>> the xpt_config message disapear by removing sbp from the kernel
> >>
> >> It seems that you have an ATAPI floppy-drive device that 8 doesn't 
> >> like:
> >>
> >> afd0: setting PIO3
> >> device_attach: afd0 attach returned 6
> >>
> >> Have you tried enabling ATA_CAM on 8 as a test, or removing the 
> >> ATAPI floppy-drive as a test?
> >
> > Ok I'm dumb, I tested atapicam instead of ata_cam.
> >
> > I rebuild 8-stable kernel with ATA_CAM and it works (with lots of
> > warnings concerning the dvdrw).
> >
> > Here is the 8-stable dmesg with boot -v:
> > http://people.freebsd.org/~bapt/P5NE-dmesg-8-stable-ata_cam.txt
> 
> New informations it doesn't work either on -CURRENT without ATA_CAM.

Hmm, can you break into ddb on 9 and run 'show intrcnt' to see if you
have non-zero interrupt counts for IRQs 14 and 15?

-- 
John Baldwin