Hello all, I am testing the all.13.1.patch , as well as xorg 7.5.2 on FreeBSD HEAD I have a Asus n53sv laptop with a sandybridge i7 CPU (as well as a Nvidia 540m) my main problem is I can't start x becasue I get these errors [ 301.537] (EE) No devices detected. [ 301.537] Fatal server error: [ 301.537] no screens found [ 301.537] if anyone could provide me suggestions. that would be great :) This is a clean install with no ports installed before I built the xorg-dev svn I will provide as much detail as possible below: cat /etc/make.conf WITH_NEW_XORG=yes WITH_KMS=yes # added by use.perl 2012-02-08 10:03:27 PERL_VERSION=5.12.4 301.354] (**) ModulePath set to "/usr/local/lib/xorg/modules" [ 301.354] (**) Extension "Composite" is enabled [ 301.354] (II) Loader magic: 0x7c7c60 [ 301.354] (II) Module ABI versions: [ 301.354] X.Org ANSI C Emulation: 0.4 [ 301.354] X.Org Video Driver: 10.0 [ 301.354] X.Org XInput driver : 12.2 [ 301.354] X.Org Server Extension : 5.0 [ 301.355] (!!) More than one possible primary device found [ 301.355] (--) PCI: (0:0:2:0) 8086:0116:1043:1642 rev 9, Mem _at_ 0xdc400000/4194304, 0xb0000000/268435456, I/O _at_ 0x0000e000/64, BIOS _at_ 0x????????/65536 [ 301.355] (--) PCI: (0:1:0:0) 10de:0df4:1043:1642 rev 161, Mem _at_ 0xdb000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O _at_ 0x0000d000/128, BIOS _at_ 0x????????/65536 [ 301.355] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file. [ 301.355] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file. [ 301.355] (II) "glx" will be loaded. This was enabled by default and also specified in the config file. [ 301.355] (II) "record" will be loaded by default. [ 301.355] (II) "dri" will be loaded by default. [ 301.355] (II) "dri2" will be loaded by default. [ 301.355] (II) LoadModule: "ddc" [ 301.355] (II) Module "ddc" already built-in [ 301.355] (II) LoadModule: "dbe" [ 301.388] (II) Loading /usr/local/lib/xorg/modules/extensions/libdbe.so [ 301.400] (II) Module dbe: vendor="X.Org Foundation" [ 301.400] compiled for 1.10.4, module version = 1.0.0 [ 301.400] Module class: X.Org Server Extension [ 301.400] ABI class: X.Org Server Extension, version 5.0 [ 301.400] (II) Loading extension DOUBLE-BUFFER [ 301.400] (II) LoadModule: "extmod" [ 301.401] (II) Loading /usr/local/lib/xorg/modules/extensions/libextmod.so [ 301.408] (II) Module extmod: vendor="X.Org Foundation" [ 301.408] compiled for 1.10.4, module version = 1.0.0 [ 301.408] Module class: X.Org Server Extension [ 301.408] ABI class: X.Org Server Extension, version 5.0 [ 301.408] (II) Loading extension MIT-SCREEN-SAVER [ 301.408] (II) Loading extension XFree86-VidModeExtension [ 301.408] (II) Loading extension XFree86-DGA [ 301.408] (II) Loading extension DPMS [ 301.408] (II) Loading extension XVideo [ 301.408] (II) Loading extension XVideo-MotionCompensation [ 301.408] (II) Loading extension X-Resource [ 301.408] (II) LoadModule: "glx" [ 301.409] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so [ 301.418] (II) Module glx: vendor="X.Org Foundation" [ 301.418] compiled for 1.10.4, module version = 1.0.0 [ 301.418] ABI class: X.Org Server Extension, version 5.0 [ 301.419] (==) AIGLX disabled [ 301.419] (II) Loading extension GLX [ 301.420] (II) LoadModule: "record" [ 301.420] (II) Loading /usr/local/lib/xorg/modules/extensions/librecord.so [ 301.421] (II) Module record: vendor="X.Org Foundation" [ 301.421] compiled for 1.10.4, module version = 1.13.0 [ 301.421] Module class: X.Org Server Extension [ 301.421] ABI class: X.Org Server Extension, version 5.0 [ 301.421] (II) Loading extension RECORD [ 301.421] (II) LoadModule: "dri" [ 301.422] (II) Loading /usr/local/lib/xorg/modules/extensions/libdri.so [ 301.437] (II) Module dri: vendor="X.Org Foundation" [ 301.437] compiled for 1.10.4, module version = 1.0.0 [ 301.437] ABI class: X.Org Server Extension, version 5.0 [ 301.437] (II) Loading extension XFree86-DRI [ 301.437] (II) LoadModule: "dri2" [ 301.438] (II) Loading /usr/local/lib/xorg/modules/extensions/libdri2.so [ 301.438] (II) Module dri2: vendor="X.Org Foundation" [ 301.438] compiled for 1.10.4, module version = 1.2.0 [ 301.438] ABI class: X.Org Server Extension, version 5.0 [ 301.438] (II) Loading extension DRI2 [ 301.438] (II) LoadModule: "intel" [ 301.465] (II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so [ 301.502] (II) Module intel: vendor="X.Org Foundation" [ 301.502] compiled for 1.10.4, module version = 2.17.0 [ 301.502] Module class: X.Org Video Driver [ 301.502] ABI class: X.Org Video Driver, version 10.0 [ 301.502] (II) LoadModule: "mouse" [ 301.503] (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so [ 301.516] (II) Module mouse: vendor="X.Org Foundation" [ 301.516] compiled for 1.10.4, module version = 1.7.1 [ 301.516] Module class: X.Org XInput Driver [ 301.516] ABI class: X.Org XInput driver, version 12.2 [ 301.516] (II) LoadModule: "kbd" [ 301.517] (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so [ 301.523] (II) Module kbd: vendor="X.Org Foundation" [ 301.523] compiled for 1.10.4, module version = 1.6.1 [ 301.523] Module class: X.Org XInput Driver [ 301.523] ABI class: X.Org XInput driver, version 12.2 [ 301.523] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server [ 301.524] (--) Using syscons driver with X support (version 2.0) [ 301.524] (--) using VT number 9 [ 301.537] (EE) No devices detected. [ 301.537] Fatal server error: [ 301.537] no screens found [ 301.537] Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 301.537] Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 301.537] sam# dmesg Copyright (c) 1992-2012 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.0-CURRENT #3 r231181M: Wed Feb 8 00:31:01 UTC 2012 sfourman_at_Titan:/usr/obj/usr/src/sys/GENERIC amd64 WARNING: WITNESS option enabled, expect reduced performance. CPU: Intel(R) Core(TM) i7-2630QM CPU _at_ 2.00GHz (1995.51-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x206a7 Family = 6 Model = 2a Stepping = 7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x1dbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,XSAVE,OSXSAVE,AVX> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant, performance statistics real memory = 4294967296 (4096 MB) avail memory = 3978256384 (3793 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <_ASUS_ Notebook> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 cpu4 (AP): APIC ID: 4 cpu5 (AP): APIC ID: 5 cpu6 (AP): APIC ID: 6 cpu7 (AP): APIC ID: 7 ACPI Warning: 32/64X FACS address mismatch in FADT - 0xAAFE4E40/0x00000000AAFE4D40, using 32 (20120111/tbfadt-531) ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 ctl: CAM Target Layer loaded acpi0: <_ASUS_ Notebook> on motherboard acpi_ec0: <Embedded Controller: GPE 0x1b, ECDT> port 0x62,0x66 on acpi0 acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 cpu4: <ACPI CPU> on acpi0 cpu5: <ACPI CPU> on acpi0 cpu6: <ACPI CPU> on acpi0 cpu7: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xd000-0xd07f mem 0xdb000000-0xdbffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 16 at device 0.0 on pci1 vgapci1: <VGA-compatible display> port 0xe000-0xe03f mem 0xdc400000-0xdc7fffff,0xb0000000-0xbfffffff irq 16 at device 2.0 on pci0 agp0: <SandyBridge mobile GT2 IG> on vgapci1 agp0: aperture size is 256M, detected 65532k stolen memory pci0: <simple comms> at device 22.0 (no driver attached) ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdf008000-0xdf0083ff irq 16 at device 26.0 on pci0 usbus0: EHCI version 1.0 usbus0: <EHCI (generic) USB 2.0 controller> on ehci0 hdac0: <Intel Cougar Point HDA Controller> mem 0xdf000000-0xdf003fff irq 22 at device 27.0 on pci0 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 pci3: <ACPI PCI bus> on pcib3 ath0: <Atheros 9285> mem 0xddc00000-0xddc0ffff irq 17 at device 0.0 on pci3 [ath] AR9285E_20 detected; using XE TX gain tables ath0: AR9285 mac 192.2 RF5133 phy 14.0 ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0 pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pci4: <ACPI PCI bus> on pcib4 xhci0: <XHCI (generic) USB 3.0 controller> mem 0xdd200000-0xdd20ffff irq 19 at device 0.0 on pci4 xhci0: 32 byte context size. usbus1 on xhci0 pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 pci5: <ACPI PCI bus> on pcib5 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port 0x9000-0x90ff mem 0xd2104000-0xd2104fff,0xd2100000-0xd2103fff irq 17 at device 0.0 on pci5 re0: Using 1 MSI-X message re0: turning off MSI enable bit. re0: ASPM disabled re0: Chip rev. 0x2c000000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Ethernet address: 14:da:e9:20:d9:96 ehci1: <EHCI (generic) USB 2.0 controller> mem 0xdf007000-0xdf0073ff irq 23 at device 29.0 on pci0 usbus2: EHCI version 1.0 usbus2: <EHCI (generic) USB 2.0 controller> on ehci1 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Cougar Point AHCI SATA controller> port 0xe0b0-0xe0b7,0xe0a0-0xe0a3,0xe090-0xe097,0xe080-0xe083,0xe060-0xe07f mem 0xdf006000-0xdf0067ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Sleep Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: cannot reserve I/O port range est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 est2: <Enhanced SpeedStep Frequency Control> on cpu2 p4tcc2: <CPU Frequency Thermal Control> on cpu2 est3: <Enhanced SpeedStep Frequency Control> on cpu3 p4tcc3: <CPU Frequency Thermal Control> on cpu3 est4: <Enhanced SpeedStep Frequency Control> on cpu4 p4tcc4: <CPU Frequency Thermal Control> on cpu4 est5: <Enhanced SpeedStep Frequency Control> on cpu5 p4tcc5: <CPU Frequency Thermal Control> on cpu5 est6: <Enhanced SpeedStep Frequency Control> on cpu6 p4tcc6: <CPU Frequency Thermal Control> on cpu6 est7: <Enhanced SpeedStep Frequency Control> on cpu7 p4tcc7: <CPU Frequency Thermal Control> on cpu7 Timecounters tick every 1.000 msec hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0 hdaa0: <Realtek ALC269 HDA CODEC Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek ALC269 HDA CODEC PCM (Analog 2.0+HP/2.0)> at nid 27,33 and 24,25 on hdaa0 pcm1: <Realtek ALC269 HDA CODEC PCM (Onboard Digital)> at nid 30 on hdaa0 hdacc1: <Intel Cougar Point HDA CODEC> at cad 3 on hdac0 hdaa1: <Intel Cougar Point HDA CODEC Audio Function Group> at nid 1 on hdacc1 pcm2: <Intel Cougar Point HDA CODEC PCM (HDMI/DP 8ch)> at nid 6 on hdaa1 usbus0: 480Mbps High Speed USB v2.0 usbus1: 5.0Gbps Super Speed USB v3.0 usbus2: 480Mbps High Speed USB v2.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 ugen1.1: <0x1b73> at usbus1 uhub1: <0x1b73 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 uhub1: 2 ports with 2 removable, self powered uhub0: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered ugen0.2: <vendor 0x8087> at usbus0 uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 ugen2.2: <vendor 0x8087> at usbus2 uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 uhub3: 6 ports with 6 removable, self powered uhub4: 6 ports with 6 removable, self powered ugen0.3: <vendor 0x13d3> at usbus0 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <ST9640320AS 0002SDM1> ATA-8 SATA 2.x device ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 610480MB (1250263728 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad4 SMP: AP CPU #1 Launched! cd0 at ahcich2 bus 0 scbus1 target 0 lun 0 cd0: <MATSHITA DVD-RAM UJ8A0ASW 1.01> Removable CD-ROM SCSI-0 device cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed SMP: AP CPU #4 Launched! SMP: AP CPU #6 Launched! SMP: AP CPU #5 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #7 Launched! SMP: AP CPU #2 Launched! Timecounter "TSC-low" frequency 15589953 Hz quality 1000 WARNING: WITNESS option enabled, expect reduced performance. ugen0.4: <USB2.0 UVC 2M WebCam> at usbus0 Trying to mount root from ufs:/dev/ada0p2 [rw]... wlan0: Ethernet address: 74:2f:68:3d:05:69 ubt0: <vendor 0x13d3 product 0x3304, class 224/1, rev 1.10/0.01, addr 3> on usbus0 WARNING: attempt to domain_add(bluetooth) after domainfinalize() WARNING: attempt to domain_add(netgraph) after domainfinalize() ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command OGF=0x3, OCF=0x3. Timeout ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED ath0: ath_start: sc_inreset_cnt > 0; bailing Sam Fourman Jr.Received on Wed Feb 08 2012 - 20:20:15 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:23 UTC