On Tue, May 01, 2012 at 12:35:26PM +0100, Anton Shterenlikht wrote: > On Mon, Apr 30, 2012 at 08:43:14AM -0400, John Baldwin wrote: > > > > > > I also see: > > > > > > ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0exb > > > ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 > > > ata0: reset tp2 stat0=00 stat1=00 devices=0x10000 > > > > Hmmm, I don't know how to grok these lines, but does your disk work at all now > > with any kernel? It may be that your disk has died (or a cable, etc.) and it > > just happened to coincide with your upgrade? > > I reverted back to r231158, built world and generic > kernel (minus all modules, i.e. "option MODULES_OVERRIDE="). > This works, see the verbose boot dmesg at the end. > > I think I'll just do a binary search. I traced it to r233677. The only change from 233676 to 233677 is in /sys/dev/pci/pci.c My kernel is GENERIC with no modules and with various bits removed, e.g. all raid devices and PCI network devices, which I definitely haven't got on this laptop. Below is the verbose boot with r233676. Apparently at the beginning there's also the previous unsuccessful boot with r233677. Is this a new feature? I didn't know the previous dmesg is preserved after a reboot. Anyway, you can see clearly the error with r233677. I guess this is something to do with ata -> ada change? I probably need to change ad4 into ada0 in /etc/fstab? Many thanks Copyright (c) 1992-2012 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.9-CURRENT #11 r233677M: Thu May 3 15:58:38 BST 2012 root_at_mech-aslap239.men.bris.ac.uk:/usr/obj/usr/src/sys/GEN2 amd64 WARNING: WITNESS option enabled, expect reduced performance. CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-60 (1995.05-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x60f82 Family = f Model = 68 Stepping = 2 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x2001<SSE3,CX16> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch> real memory = 3221225472 (3072 MB) avail memory = 2955333632 (2818 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <HP 0944 > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ACPI Error: 32/64X address mismatch in Pm2ControlBlock: 0x00008800/0x0000000000008100, using 32 (20120320/tbfadt-474) ioapic0: Changing APIC ID to 2 ioapic0 <Version 2.1> irqs 0-23 on motherboard kbd1 at kbdmux0 ctl: CAM Target Layer loaded acpi0: <HPQOEM SLIC-MPC> on motherboard acpi0: Power Button (fixed) unknown: I/O range not supported acpi0: reservation of 0, 8000000 (3) failed acpi0: reservation of 100000, fff00000 (3) failed cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x73 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x11> port 0x62,0x66 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pcib0: Length mismatch for 3 range: 11ff000 vs 11fefff pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0x4000-0x40ff mem 0xc0000000-0xc7ffffff,0xcc200000-0xcc20ffff,0xcc300000-0xcc3fffff irq 19 at device 5.0 on pci1 pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci16: <ACPI PCI bus> on pcib2 bge0: <Broadcom BCM5906 A2, ASIC rev. 0x00c002> mem 0xcc000000-0xcc00ffff irq 16 at device 0.0 on pci16 bge0: CHIP ID 0x0000c002; ASIC REV 0x0c; CHIP REV 0xc0; PCI-E miibus0: <MII bus> on bge0 brgphy0: <BCM5906 10/100baseTX media interface> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow bge0: Ethernet address: 00:1a:4b:89:4b:4e pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0 pci32: <ACPI PCI bus> on pcib3 ahci0: <ATI IXP600 AHCI SATA controller> port 0x9000-0x9007,0x9008-0x900b,0x9010-0x9017,0x5018-0x501b,0x5020-0x502f mem 0xcc409000-0xcc4093ff irq 16 at device 18.0 on pci0 ahci0: AHCI v0.00 with 1 ?Gbps ports, Port Multiplier not supported with FBS ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich7: <AHCI channel> at channel 7 on ahci0 device_attach: ahcich7 attach returned 6 ahcich8: <AHCI channel> at channel 8 on ahci0 device_attach: ahcich8 attach returned 6 ahcich9: <AHCI channel> at channel 9 on ahci0 device_attach: ahcich9 attach returned 6 ahcich10: <AHCI channel> at channel 10 on ahci0 device_attach: ahcich10 attach returned 6 ahcich11: <AHCI channel> at channel 11 on ahci0 device_attach: ahcich11 attach returned 6 ahcich12: <AHCI channel> at channel 12 on ahci0 device_attach: ahcich12 attach returned 6 ahcich13: <AHCI channel> at channel 13 on ahci0 device_attach: ahcich13 attach returned 6 ahcich14: <AHCI channel> at channel 14 on ahci0 device_attach: ahcich14 attach returned 6 ahcich15: <AHCI channel> at channel 15 on ahci0 device_attach: ahcich15 attach returned 6 ahcich21: <AHCI channel> at channel 21 on ahci0 device_attach: ahcich21 attach returned 6 ahcich24: <AHCI channel> at channel 24 on ahci0 device_attach: ahcich24 attach returned 6 ahcich25: <AHCI channel> at channel 25 on ahci0 device_attach: ahcich25 attach returned 6 ahcich26: <AHCI channel> at channel 26 on ahci0 device_attach: ahcich26 attach returned 6 ahcich28: <AHCI channel> at channel 28 on ahci0 device_attach: ahcich28 attach returned 6 ahcich29: <AHCI channel> at channel 29 on ahci0 device_attach: ahcich29 attach returned 6 ahcich30: <AHCI channel> at channel 30 on ahci0 device_attach: ahcich30 attach returned 6 ahcich31: <AHCI channel> at channel 31 on ahci0 device_attach: ahcich31 attach returned 6 ahcich32: <AHCI channel> at channel 32 on ahci0 device_attach: ahcich32 attach returned 6 ahcich33: <AHCI channel> at channel 33 on ahci0 device_attach: ahcich33 attach returned 6 ahcich39: <AHCI channel> at channel 39 on ahci0 device_attach: ahcich39 attach returned 6 ahcich40: <AHCI channel> at channel 40 on ahci0 device_attach: ahcich40 attach returned 6 ahcich41: <AHCI channel> at channel 41 on ahci0 device_attach: ahcich41 attach returned 6 ahcich42: <AHCI channel> at channel 42 on ahci0 device_attach: ahcich42 attach returned 6 ahcich43: <AHCI channel> at channel 43 on ahci0 device_attach: ahcich43 attach returned 6 ahcich44: <AHCI channel> at channel 44 on ahci0 device_attach: ahcich44 attach returned 6 ahcich45: <AHCI channel> at channel 45 on ahci0 device_attach: ahcich45 attach returned 6 ahcich46: <AHCI channel> at channel 46 on ahci0 device_attach: ahcich46 attach returned 6 ahcich47: <AHCI channel> at channel 47 on ahci0 device_attach: ahcich47 attach returned 6 ahcich53: <AHCI channel> at channel 53 on ahci0 device_attach: ahcich53 attach returned 6 ahcich56: <AHCI channel> at channel 56 on ahci0 device_attach: ahcich56 attach returned 6 ahcich57: <AHCI channel> at channel 57 on ahci0 device_attach: ahcich57 attach returned 6 ahcich58: <AHCI channel> at channel 58 on ahci0 device_attach: ahcich58 attach returned 6 ahcich60: <AHCI channel> at channel 60 on ahci0 device_attach: ahcich60 attach returned 6 ahcich61: <AHCI channel> at channel 61 on ahci0 device_attach: ahcich61 attach returned 6 ahcich62: <AHCI channel> at channel 62 on ahci0 device_attach: ahcich62 attach returned 6 ahcich63: <AHCI channel> at channel 63 on ahci0 device_attach: ahcich63 attach returned 6 ohci0: <OHCI (generic) USB controller> mem 0xcc401000-0xcc401fff irq 23 at device 19.0 on pci0 usbus0 on ohci0 ohci1: <OHCI (generic) USB controller> mem 0xcc402000-0xcc402fff irq 17 at device 19.1 on pci0 usbus1 on ohci1 ohci2: <OHCI (generic) USB controller> mem 0xcc403000-0xcc403fff irq 17 at device 19.2 on pci0 usbus2 on ohci2 ohci3: <OHCI (generic) USB controller> mem 0xcc404000-0xcc404fff irq 17 at device 19.3 on pci0 usbus3 on ohci3 ohci4: <OHCI (generic) USB controller> mem 0xcc405000-0xcc405fff irq 17 at device 19.4 on pci0 usbus4 on ohci4 ehci0: <EHCI (generic) USB 2.0 controller> mem 0xcc406000-0xcc4060ff irq 23 at device 19.5 on pci0 ehci0: AMD SB600/700 quirk applied usbus5: EHCI version 1.0 usbus5 on ehci0 pci0: <serial bus, SMBus> at device 20.0 (no driver attached) atapci0: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x5040-0x504f irq 16 at device 20.1 on pci0 ata0: <ATA channel> at channel 0 on atapci0 hdac0: <ATI SB600 HDA Controller> irq 16 at device 20.2 on pci0 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pcib4: failed to allocate initial memory window: 0xcc100000-0xcc1fffff pci2: <ACPI PCI bus> on pcib4 cbb0: <RF5C476 PCI-CardBus Bridge> irq 20 at device 4.0 on pci2 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 battery0: <ACPI Control Method Battery> on acpi0 battery1: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_button0: <Sleep Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 orm0: <ISA Option ROM> at iomem 0xd0000-0xd0fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 powernow0: <PowerNow! K8> on cpu0 acpi_throttle1: <ACPI CPU Throttling> on cpu1 acpi_throttle1: failed to attach P_CNT device_attach: acpi_throttle1 attach returned 6 powernow1: <PowerNow! K8> on cpu1 Timecounters tick every 1.000 msec hdacc0: <Analog Devices AD1981HD HDA CODEC> at cad 0 on hdac0 hdaa0: <Analog Devices AD1981HD HDA CODEC Audio Function Group> at nid 1 on hdacc0 pcm0: <Analog Devices AD1981HD HDA CODEC PCM (Analog 2.0+HP/2.0)> at nid 5,6 and 8,9 on hdaa0 hdacc1: <Lucent/Agere Systems (0x1040) HDA CODEC> at cad 1 on hdac0 unknown: <Lucent/Agere Systems (0x1040) HDA CODEC Modem Function Group> at nid 1 on hdacc1 (no driver attached) usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 480Mbps High Speed USB v2.0 ugen0.1: <ATI> at usbus0 uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <ATI> at usbus1 uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <ATI> at usbus2 uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <ATI> at usbus3 uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <ATI> at usbus4 uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <ATI> at usbus5 uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 ahcich0: Poll timeout on slot 0 port 0 ahcich0: is 00000000 cs 00000001 ss 00000000 rs 00000001 tfd 150 serr 00000000 cmd 00002007 cd0 at ata0 bus 0 scbus2 target 0 lun 0 cd0: <MATSHITA DVD-RAM UJ-861H 1.50> Removable CD-ROM SCSI-0 device cd0: 16.700MB/s transfers (WDMA2, ATAPI 12bytes, PIO 65534bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed SMP: AP CPU #1 Launched! WARNING: WITNESS option enabled, expect reduced performance. Root mount waiting for: usbus5 usbus4 usbus3 usbus2 usbus1 usbus0 uhub1: 2 ports with 2 removable, self powered uhub0: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered Root mount waiting for: usbus5 Root mount waiting for: usbus5 Root mount waiting for: usbus5 Root mount waiting for: usbus5 uhub5: 10 ports with 10 removable, self powered Trying to mount root from ufs:/dev/ad4s1a [rw]... mountroot: waiting for device /dev/ad4s1a ... Mounting from ufs:/dev/ad4s1a failed with error 19. Loader variables: vfs.root.mountfrom=ufs:/dev/ad4s1a vfs.root.mountfrom.options=rw Manual root filesystem specification: <fstype>:<device> [options] Mount <device> using filesystem <fstype> and with the specified (optional) option list. eg. ufs:/dev/da0s1a zfs:tank cd9660:/dev/acd0 ro (which is equivalent to: mount -t cd9660 -o ro /dev/acd0 /) ? List valid disk boot devices . Yield 1 second (for background tasks) <empty line> Abort manual input mountroot> List of GEOM managed disk devices: cd0 mountroot> panic: mountroot: unable to (re-)mount root. cpuid = 1 KDB: enter: panic Table 'FACP' at 0xb7fc8084 Table 'SLIC' at 0xb7fc8220 Table 'EPTH' at 0xb7fc8398 Table 'APIC' at 0xb7fc83d0 APIC: Found table at 0xb7fc83d0 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 1: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 2: enabled SMP: Added CPU 1 (AP) Copyright (c) 1992-2012 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.9-CURRENT #9 r233676M: Thu May 3 15:30:08 BST 2012 root_at_mech-aslap239.men.bris.ac.uk:/usr/obj/usr/src/sys/GEN2 amd64 WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel.old/kernel" at 0xffffffff811b3000. Calibrating TSC clock ... TSC clock: 1995045302 Hz CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-60 (1995.05-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x60f82 Family = f Model = 68 Stepping = 2 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x2001<SSE3,CX16> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch> L1 2MB data TLB: 8 entries, fully associative L1 2MB instruction TLB: 8 entries, fully associative L1 4KB data TLB: 32 entries, fully associative L1 4KB instruction TLB: 32 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 2MB unified TLB: 0 entries, disabled/not present L2 4KB data TLB: 512 entries, 4-way associative L2 4KB instruction TLB: 512 entries, 4-way associative L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative real memory = 3221225472 (3072 MB) Physical memory chunk(s): 0x0000000000010000 - 0x000000000009bfff, 573440 bytes (140 pages) 0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages) 0x00000000011e2000 - 0x00000000b28ecfff, 2976952320 bytes (726795 pages) avail memory = 2955333632 (2818 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <HP 0944 > INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 2 x86bios: IVT 0x000000-0x0004ff at 0xfffffe0000000000 x86bios: SSEG 0x098000-0x098fff at 0xffffff8000210000 x86bios: EBDA 0x09f000-0x09ffff at 0xfffffe000009f000 x86bios: ROM 0x0a0000-0x0fefff at 0xfffffe00000a0000 ULE: setup cpu 0 ULE: setup cpu 1 ACPI: RSDP 0xfe0b0 00024 (v02 HP ) ACPI: XSDT 0xb7fc81bc 00064 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: FACP 0xb7fc8084 000F4 (v04 HP 0944 00000003 HP 00000001) ACPI Error: 32/64X address mismatch in Pm2ControlBlock: 0x00008800/0x0000000000008100, using 32 (20120320/tbfadt-474) ACPI: DSDT 0xb7fc84a4 11437 (v01 HP SB400 00010000 MSFT 03000001) ACPI: FACS 0xb7fe7d80 00040 ACPI: SLIC 0xb7fc8220 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: EPTH 0xb7fc8398 00038 (v01 HP 0944 00000001 HP 00000001) ACPI: APIC 0xb7fc83d0 00062 (v01 HP 0944 00000001 HP 00000001) ACPI: MCFG 0xb7fc8434 0003C (v01 HP 0944 00000001 HP 00000001) ACPI: TCPA 0xb7fc8470 00032 (v02 HP 0944 00000001 HP 00000001) ACPI: SSDT 0xb7fd98db 00059 (v01 HP HPQNLP 00000001 MSFT 03000001) ACPI: SSDT 0xb7fd9934 00206 (v01 HP PSSTBLID 00000001 HP 00000001) MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 2 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0: intpin 9 polarity: low lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high ioapic0 <Version 2.1> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 wlan: <802.11 Link Layer> mem: <memory> nfslock: pseudo-device null: <null device, zero device> random: <entropy source, Software, Yarrow> io: <I/O> kbd: new array size 4 kbd1 at kbdmux0 ctl: CAM Target Layer loaded acpi0: <HPQOEM SLIC-MPC> on motherboard PCIe: Memory Mapped configuration base _at_ 0xe0000000 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 acpi0: Power Button (fixed) unknown: I/O range not supported acpi0: reservation of 0, 8000000 (3) failed acpi0: reservation of 100000, fff00000 (3) failed cpu0: <ACPI CPU> on acpi0 cpu0: switching to generic Cx mode cpu1: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 49 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x73 irq 8 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s) ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 50 Event timer "RTC" frequency 32768 Hz quality 0 ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x11> port 0x62,0x66 on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 10 11 Validation 0 255 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 10 11 Validation 0 255 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 10 11 Validation 0 255 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 10 11 Validation 0 255 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 10 11 Validation 0 255 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 9 Validation 0 255 N 0 9 After Disable 0 255 N 0 9 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 10 11 Validation 0 255 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 10 11 Validation 0 255 N 0 10 11 After Disable 0 255 N 0 10 11 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pcib0: decoding 4 range 0-0xcf7 pcib0: decoding 4 range 0xd00-0xffff pcib0: decoding 3 range 0xa0000-0xbffff pcib0: decoding 3 range 0xc0000000-0xfedfffff pcib0: Length mismatch for 3 range: 11ff000 vs 11fefff pcib0: decoding 3 range 0xfee01000-0xffffffff pcib0: decoding 3 range 0xd3000-0xdffff pci0: <ACPI PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x1002, dev=0x7910, revid=0x00 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2220, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x7912, revid=0x00 domain=0, bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x7914, revid=0x00 domain=0, bus=0, slot=4, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x1002, dev=0x7915, revid=0x00 domain=0, bus=0, slot=5, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x1002, dev=0x4380, revid=0x00 domain=0, bus=0, slot=18, func=0 class=01-01-8f, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0x9000, size 3, enabled pcib0: allocated type 4 (0x9000-0x9007) for rid 10 of pci0:0:18:0 map[14]: type I/O Port, range 32, base 0x9008, size 2, enabled pcib0: allocated type 4 (0x9008-0x900b) for rid 14 of pci0:0:18:0 map[18]: type I/O Port, range 32, base 0x9010, size 3, enabled pcib0: allocated type 4 (0x9010-0x9017) for rid 18 of pci0:0:18:0 map[1c]: type I/O Port, range 32, base 0x5018, size 2, enabled pcib0: allocated type 4 (0x5018-0x501b) for rid 1c of pci0:0:18:0 map[20]: type I/O Port, range 32, base 0x5020, size 4, enabled pcib0: allocated type 4 (0x5020-0x502f) for rid 20 of pci0:0:18:0 map[24]: type Memory, range 32, base 0xcc409000, size 10, enabled pcib0: allocated type 3 (0xcc409000-0xcc4093ff) for rid 24 of pci0:0:18:0 pcib0: matched entry for 0.18.INTA pcib0: slot 18 INTA hardwired to IRQ 16 found-> vendor=0x1002, dev=0x4387, revid=0x00 domain=0, bus=0, slot=19, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x02a0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[10]: type Memory, range 32, base 0xcc401000, size 12, enabled pcib0: allocated type 3 (0xcc401000-0xcc401fff) for rid 10 of pci0:0:19:0 pcib0: matched entry for 0.19.INTA pcib0: slot 19 INTA hardwired to IRQ 23 found-> vendor=0x1002, dev=0x4388, revid=0x00 domain=0, bus=0, slot=19, func=1 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02a0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 map[10]: type Memory, range 32, base 0xcc402000, size 12, enabled pcib0: allocated type 3 (0xcc402000-0xcc402fff) for rid 10 of pci0:0:19:1 pcib0: matched entry for 0.19.INTB pcib0: slot 19 INTB hardwired to IRQ 17 found-> vendor=0x1002, dev=0x4389, revid=0x00 domain=0, bus=0, slot=19, func=2 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02a0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=5 map[10]: type Memory, range 32, base 0xcc403000, size 12, enabled pcib0: allocated type 3 (0xcc403000-0xcc403fff) for rid 10 of pci0:0:19:2 pcib0: matched entry for 0.19.INTC pcib0: slot 19 INTC hardwired to IRQ 17 found-> vendor=0x1002, dev=0x438a, revid=0x00 domain=0, bus=0, slot=19, func=3 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02a0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 map[10]: type Memory, range 32, base 0xcc404000, size 12, enabled pcib0: allocated type 3 (0xcc404000-0xcc404fff) for rid 10 of pci0:0:19:3 pcib0: matched entry for 0.19.INTB pcib0: slot 19 INTB hardwired to IRQ 17 found-> vendor=0x1002, dev=0x438b, revid=0x00 domain=0, bus=0, slot=19, func=4 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02a0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=5 map[10]: type Memory, range 32, base 0xcc405000, size 12, enabled pcib0: allocated type 3 (0xcc405000-0xcc405fff) for rid 10 of pci0:0:19:4 pcib0: matched entry for 0.19.INTC pcib0: slot 19 INTC hardwired to IRQ 17 found-> vendor=0x1002, dev=0x4386, revid=0x00 domain=0, bus=0, slot=19, func=5 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xcc406000, size 8, enabled pcib0: allocated type 3 (0xcc406000-0xcc4060ff) for rid 10 of pci0:0:19:5 pcib0: matched entry for 0.19.INTD pcib0: slot 19 INTD hardwired to IRQ 23 found-> vendor=0x1002, dev=0x4385, revid=0x14 domain=0, bus=0, slot=20, func=0 class=0c-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0003, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type I/O Port, range 32, base 0x8200, size 4, enabled pcib0: allocated type 4 (0x8200-0x820f) for rid 10 of pci0:0:20:0 found-> vendor=0x1002, dev=0x438c, revid=0x00 domain=0, bus=0, slot=20, func=1 class=01-01-82, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0220, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 pcib0: allocated type 4 (0x1f0-0x1f7) for rid 10 of pci0:0:20:1 pcib0: allocated type 4 (0x3f6-0x3f6) for rid 14 of pci0:0:20:1 pcib0: allocated type 4 (0x170-0x177) for rid 18 of pci0:0:20:1 pcib0: allocated type 4 (0x376-0x376) for rid 1c of pci0:0:20:1 map[20]: type I/O Port, range 32, base 0x5040, size 4, enabled pcib0: allocated type 4 (0x5040-0x504f) for rid 20 of pci0:0:20:1 pcib0: matched entry for 0.20.INTA pcib0: slot 20 INTA hardwired to IRQ 16 found-> vendor=0x1002, dev=0x4383, revid=0x00 domain=0, bus=0, slot=20, func=2 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0410, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 64, base 0xcc408000, size 14, enabled pcib0: matched entry for 0.20.INTA pcib0: slot 20 INTA hardwired to IRQ 16 found-> vendor=0x1002, dev=0x438d, revid=0x00 domain=0, bus=0, slot=20, func=3 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x4384, revid=0x00 domain=0, bus=0, slot=20, func=4 class=06-04-01, hdrtype=0x01, mfdev=1 cmdreg=0x0027, statreg=0x02a0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1100, revid=0x00 domain=0, bus=0, slot=24, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1101, revid=0x00 domain=0, bus=0, slot=24, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1102, revid=0x00 domain=0, bus=0, slot=24, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1103, revid=0x00 domain=0, bus=0, slot=24, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib0: allocated type 4 (0x4000-0x4fff) for rid 1c of pcib1 pcib0: allocated type 3 (0xcc200000-0xcc3fffff) for rid 20 of pcib1 pcib0: allocated type 3 (0xc0000000-0xc7ffffff) for rid 24 of pcib1 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x4000-0x4fff pcib1: memory decode 0xcc200000-0xcc3fffff pcib1: prefetched decode 0xc0000000-0xc7ffffff pci1: <ACPI PCI bus> on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x1002, dev=0x791f, revid=0x00 domain=0, bus=1, slot=5, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Prefetchable Memory, range 64, base 0xc0000000, size 27, enabled pcib1: allocated prefetch range (0xc0000000-0xc7ffffff) for rid 10 of pci0:1:5:0 map[18]: type Memory, range 64, base 0xcc200000, size 16, enabled pcib1: allocated memory range (0xcc200000-0xcc20ffff) for rid 18 of pci0:1:5:0 map[20]: type I/O Port, range 32, base 0x4000, size 8, enabled pcib1: allocated I/O port range (0x4000-0x40ff) for rid 20 of pci0:1:5:0 map[24]: type Memory, range 32, base 0xcc300000, size 20, enabled pcib1: allocated memory range (0xcc300000-0xcc3fffff) for rid 24 of pci0:1:5:0 pcib1: matched entry for 1.5.INTB pcib1: slot 5 INTB hardwired to IRQ 19 vgapci0: <VGA-compatible display> port 0x4000-0x40ff mem 0xc0000000-0xc7ffffff,0xcc200000-0xcc20ffff,0xcc300000-0xcc3fffff irq 19 at device 5.0 on pci1 pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pcib0: allocated type 3 (0xcc000000-0xcc0fffff) for rid 20 of pcib2 pcib2: domain 0 pcib2: secondary bus 16 pcib2: subordinate bus 16 pcib2: memory decode 0xcc000000-0xcc0fffff pcib2: no prefetched decode pcib2: could not get PCI interrupt routing table for \\_SB_.C08B.C24F - AE_NOT_FOUND pci16: <ACPI PCI bus> on pcib2 pci16: domain=0, physical bus=16 found-> vendor=0x14e4, dev=0x1713, revid=0x02 domain=0, bus=16, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xcc000000, size 16, enabled pcib2: allocated memory range (0xcc000000-0xcc00ffff) for rid 10 of pci0:16:0:0 pcib0: matched entry for 0.4.INTA pcib0: slot 4 INTA hardwired to IRQ 16 pcib2: slot 0 INTA is routed to irq 16 bge0: <Broadcom BCM5906 A2, ASIC rev. 0x00c002> mem 0xcc000000-0xcc00ffff irq 16 at device 0.0 on pci16 bge0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 256 to local APIC 0 vector 51 bge0: using IRQ 256 for MSI bge0: CHIP ID 0x0000c002; ASIC REV 0x0c; CHIP REV 0xc0; PCI-E miibus0: <MII bus> on bge0 brgphy0: <BCM5906 10/100baseTX media interface> PHY 1 on miibus0 brgphy0: OUI 0x0050ef, model 0x0004, rev. 0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow bge0: bpf attached bge0: Ethernet address: 00:1a:4b:89:4b:4e pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0 pcib0: allocated type 4 (0x2000-0x3fff) for rid 1c of pcib3 pcib0: allocated type 3 (0xc8000000-0xcbffffff) for rid 20 of pcib3 pcib3: domain 0 pcib3: secondary bus 32 pcib3: subordinate bus 32 pcib3: I/O decode 0x2000-0x3fff pcib3: memory decode 0xc8000000-0xcbffffff pcib3: no prefetched decode pcib3: could not get PCI interrupt routing table for \\_SB_.C08B.C254 - AE_NOT_FOUND pci32: <ACPI PCI bus> on pcib3 pci32: domain=0, physical bus=32 ahci0: <ATI IXP600 AHCI SATA controller> port 0x9000-0x9007,0x9008-0x900b,0x9010-0x9017,0x5018-0x501b,0x5020-0x502f mem 0xcc409000-0xcc4093ff irq 16 at device 18.0 on pci0 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 52 ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier not supported ahci0: Caps: 64bit NCQ SNTF MPS ALP AL CLO 3Gbps PMD SSC PSC 32cmd CCC 4ports ahci0: Caps2: ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich0: Caps: ahcich1: not probed (disabled) ahcich2: not probed (disabled) ahcich3: not probed (disabled) ohci0: <OHCI (generic) USB controller> mem 0xcc401000-0xcc401fff irq 23 at device 19.0 on pci0 ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 53 usbus0 on ohci0 usbus0: bpf attached ohci0: usbpf: Attached ohci1: <OHCI (generic) USB controller> mem 0xcc402000-0xcc402fff irq 17 at device 19.1 on pci0 ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 54 usbus1 on ohci1 usbus1: bpf attached ohci1: usbpf: Attached ohci2: <OHCI (generic) USB controller> mem 0xcc403000-0xcc403fff irq 17 at device 19.2 on pci0 usbus2 on ohci2 usbus2: bpf attached ohci2: usbpf: Attached ohci3: <OHCI (generic) USB controller> mem 0xcc404000-0xcc404fff irq 17 at device 19.3 on pci0 usbus3 on ohci3 usbus3: bpf attached ohci3: usbpf: Attached ohci4: <OHCI (generic) USB controller> mem 0xcc405000-0xcc405fff irq 17 at device 19.4 on pci0 usbus4 on ohci4 usbus4: bpf attached ohci4: usbpf: Attached ehci0: <EHCI (generic) USB 2.0 controller> mem 0xcc406000-0xcc4060ff irq 23 at device 19.5 on pci0 ehci0: AMD SB600/700 quirk applied ehci0: Dropped interrupts workaround enabled usbus5: EHCI version 1.0 usbus5 on ehci0 usbus5: bpf attached ehci0: usbpf: Attached pci0: <serial bus, SMBus> at device 20.0 (no driver attached) atapci0: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x5040-0x504f irq 16 at device 20.1 on pci0 ata0: <ATA channel> at channel 0 on atapci0 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 55 hdac0: <ATI SB600 HDA Controller> irq 16 at device 20.2 on pci0 hdac0: HDA Driver Revision: 20120126_0002 hdac0: Config options: on=0x00000000 off=0x00000000 pcib0: allocated type 3 (0xcc100000-0xcc103fff) for rid 10 of hdac0 hdac0: Lazy allocation of 0x4000 bytes rid 0x10 type 3 at 0xcc100000 hdac0: Caps: OSS 4, ISS 4, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pcib4: failed to allocate initial memory window: 0xcc100000-0xcc1fffff pcib4: domain 0 pcib4: secondary bus 2 pcib4: subordinate bus 3 pcib4: no prefetched decode pcib4: Subtractively decoded bridge. pci2: <ACPI PCI bus> on pcib4 pci2: domain=0, physical bus=2 found-> vendor=0x1180, dev=0x0476, revid=0xb6 domain=0, bus=2, slot=4, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x07 (1750 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xcc100000, size 12, enabled pcib4: failed to allocate initial memory window (0xcc100000-0xcc1fffff,0x100000) pcib4: matched entry for 2.4.INTA pcib4: slot 4 INTA hardwired to IRQ 20 cbb0: <RF5C476 PCI-CardBus Bridge> irq 20 at device 4.0 on pci2 pcib0: allocated type 3 (0xcc500000-0xcc5fffff) for rid 20 of pcib4 pcib4: allocated initial memory window of 0xcc500000-0xcc5fffff pcib4: allocated memory range (0xcc500000-0xcc500fff) for rid 10 of cbb0 cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xcc500000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 56 cbb0: PCI Configuration space: 0x00: 0x04761180 0x02100007 0x060700b6 0x00824000 0x10: 0xcc500000 0x020000dc 0x20030302 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x07000114 0x40: 0x30c2103c 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x30a00001 0x00000000 0x04630463 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000008 0x00000000 0x00000000 0x00000000 0xb0: 0x00000000 0xbe000000 0x00003000 0x00000000 0xc0: 0x30c2103c 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001 0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 battery0: <ACPI Control Method Battery> on acpi0 battery1: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_button0: <Sleep Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 57 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 psm0: current command byte:0065 psm0: <PS/2 Mouse> irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 58 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00004000, flags:00000008, packet size:4 psm0: syncmask:08, syncbits:00 acpi0: wakeup code va 0xffffff80cd86b000 pa 0x90000 pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0 pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0 pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0 pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0 pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0 pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0 pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0 pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0 pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0 pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0 pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0 pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0 pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0 pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0 pcib0: allocated type 3 (0xd3000-0xd37ff) for rid 1 of orm0 pcib0: allocated type 3 (0xd3800-0xd3fff) for rid 1 of orm0 pcib0: allocated type 3 (0xd4000-0xd47ff) for rid 1 of orm0 pcib0: allocated type 3 (0xd4800-0xd4fff) for rid 1 of orm0 pcib0: allocated type 3 (0xd5000-0xd57ff) for rid 1 of orm0 pcib0: allocated type 3 (0xd5800-0xd5fff) for rid 1 of orm0 pcib0: allocated type 3 (0xd6000-0xd67ff) for rid 1 of orm0 pcib0: allocated type 3 (0xd6800-0xd6fff) for rid 1 of orm0 pcib0: allocated type 3 (0xd7000-0xd77ff) for rid 1 of orm0 pcib0: allocated type 3 (0xd7800-0xd7fff) for rid 1 of orm0 pcib0: allocated type 3 (0xd8000-0xd87ff) for rid 1 of orm0 pcib0: allocated type 3 (0xd8800-0xd8fff) for rid 1 of orm0 pcib0: allocated type 3 (0xd9000-0xd97ff) for rid 1 of orm0 pcib0: allocated type 3 (0xd9800-0xd9fff) for rid 1 of orm0 pcib0: allocated type 3 (0xda000-0xda7ff) for rid 1 of orm0 pcib0: allocated type 3 (0xda800-0xdafff) for rid 1 of orm0 pcib0: allocated type 3 (0xdb000-0xdb7ff) for rid 1 of orm0 pcib0: allocated type 3 (0xdb800-0xdbfff) for rid 1 of orm0 pcib0: allocated type 3 (0xdc000-0xdc7ff) for rid 1 of orm0 pcib0: allocated type 3 (0xdc800-0xdcfff) for rid 1 of orm0 pcib0: allocated type 3 (0xdd000-0xdd7ff) for rid 1 of orm0 pcib0: allocated type 3 (0xdd800-0xddfff) for rid 1 of orm0 pcib0: allocated type 3 (0xde000-0xde7ff) for rid 1 of orm0 pcib0: allocated type 3 (0xde800-0xdefff) for rid 1 of orm0 pcib0: allocated type 3 (0xdf000-0xdf7ff) for rid 1 of orm0 pcib0: allocated type 3 (0xdf800-0xdffff) for rid 1 of orm0 ahc_isa_probe 0: ioport 0xc00 alloc failed ahc_isa_probe 1: ioport 0x1c00 alloc failed ahc_isa_probe 2: ioport 0x2c00 alloc failed ahc_isa_probe 3: ioport 0x3c00 alloc failed ahc_isa_probe 4: ioport 0x4c00 alloc failed ahc_isa_probe 5: ioport 0x5c00 alloc failed ahc_isa_probe 6: ioport 0x6c00 alloc failed ahc_isa_probe 7: ioport 0x7c00 alloc failed ahc_isa_probe 8: ioport 0x8c00 alloc failed ahc_isa_probe 9: ioport 0x9c00 alloc failed ahc_isa_probe 10: ioport 0xac00 alloc failed ahc_isa_probe 11: ioport 0xbc00 alloc failed ahc_isa_probe 12: ioport 0xcc00 alloc failed ahc_isa_probe 13: ioport 0xdc00 alloc failed ahc_isa_probe 14: ioport 0xec00 alloc failed isa_probe_children: disabling PnP devices atkbdc: atkbdc0 already exists; skipping it atrtc: atrtc0 already exists; skipping it attimer: attimer0 already exists; skipping it sc: sc0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: <ISA Option ROM> at iomem 0xd0000-0xd0fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0 pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0 fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 ppc0 failed to probe at irq 7 on isa0 pcib0: allocated type 4 (0x3f8-0x3ff) for rid 0 of uart0 uart0 failed to probe at port 0x3f8-0x3ff irq 4 on isa0 pcib0: allocated type 4 (0x2f8-0x2ff) for rid 0 of uart1 uart1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 wbwd0 failed to probe on isa0 isa_probe_children: probing PnP devices acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_throttle0: P_CNT from P_BLK 0x8010 powernow0: <PowerNow! K8> on cpu0 acpi_throttle1: <ACPI CPU Throttling> on cpu1 acpi_throttle1: failed to attach P_CNT device_attach: acpi_throttle1 attach returned 6 powernow1: <PowerNow! K8> on cpu1 Device configuration finished. procfs registered lapic: Divisor 2, Frequency 99750240 Hz Timecounters tick every 1.000 msec vlan: initialized, using hash tables with chaining lo0: bpf attached hdacc0: <Analog Devices AD1981HD HDA CODEC> at cad 0 on hdac0 hdacc0: Root Node at nid=0: 1 subnodes 1-1 hdaa0: <Analog Devices AD1981HD HDA CODEC Audio Function Group> at nid 1 on hdacc0 hdaa0: Audio Function Group at nid=1: 30 subnodes 2-31 hdaa0: NumGPIO=4 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=1 hdaa0: GPIO0: disabled hdaa0: GPIO1: disabled hdaa0: GPIO2: disabled hdaa0: GPIO3: disabled hdaa0: WARNING: nid=2 has cnid outside of the AFG range j=0 entnum=4 index=0 res=0x00000401 hdaa0: Original pins configuration: hdaa0: nid 0x as seq device conn jack loc color misc hdaa0: 5 92174110 1 0 Speaker Fixed Analog 0x12 Green 1 hdaa0: 6 0421201f 1 15 Headphones Jack 1/8 Right Grey 0 hdaa0: 7 410710f0 15 0 Line-out None Analog Rear Black 0 hdaa0: 8 04a12020 2 0 Mic Jack 1/8 Right Grey 0 hdaa0: 9 0181302e 2 14 Line-in Jack 1/8 Rear Blue 0 hdaa0: 10 4145f0f0 15 0 SPDIF-out None Optical Rear Other 0 hdaa0: 22 995711f0 15 0 Digital-out Fixed Analog Onboard Black 1 hdaa0: 23 5993e0f0 15 0 AUX None ATAPI Onboard White 0 hdaa0: 24 f0a79159 5 9 Mic Both Analog Other Pink 1 hdaa0: 25 593310f0 15 0 CD None ATAPI Onboard Black 0 hdaa0: Patched pins configuration: hdaa0: nid 0x as seq device conn jack loc color misc hdaa0: 5 92174110 1 0 Speaker Fixed Analog 0x12 Green 1 hdaa0: 6 0421201f 1 15 Headphones Jack 1/8 Right Grey 0 hdaa0: 7 410710f0 15 0 Line-out None Analog Rear Black 0 DISA hdaa0: 8 04a12020 2 0 Mic Jack 1/8 Right Grey 0 hdaa0: 9 0181302e 2 14 Line-in Jack 1/8 Rear Blue 0 hdaa0: 10 4145f0f0 15 0 SPDIF-out None Optical Rear Other 0 DISA hdaa0: 22 995711f0 15 0 Digital-out Fixed Analog Onboard Black 1 hdaa0: 23 5993e0f0 15 0 AUX None ATAPI Onboard White 0 DISA hdaa0: 24 f0a79159 5 9 Mic Both Analog Other Pink 1 hdaa0: 25 593310f0 15 0 CD None ATAPI Onboard Black 0 DISA hdaa0: 4 associations found: hdaa0: Association 0 (1) out: hdaa0: Pin nid=5 seq=0 hdaa0: Pin nid=6 seq=15 hdaa0: Association 1 (2) in: hdaa0: Pin nid=8 seq=0 hdaa0: Pin nid=9 seq=14 hdaa0: Association 2 (5) in: hdaa0: Pin nid=24 seq=9 hdaa0: Association 3 (15) out: hdaa0: Pin nid=22 seq=0 hdaa0: Tracing association 0 (1) hdaa0: Pin 5 traced to DAC 3 hdaa0: Pin 6 traced to DAC 3 and hpredir 0 hdaa0: Association 0 (1) trace succeeded hdaa0: Tracing association 1 (2) hdaa0: Pin 8 traced to ADC 4 hdaa0: Pin 9 traced to ADC 4 hdaa0: Association 1 (2) trace succeeded hdaa0: Tracing association 2 (5) hdaa0: Association 2 (5) trace failed hdaa0: Tracing association 3 (15) hdaa0: Unable to trace pin 22 seq 0 with min nid 0 hdaa0: Association 3 (15) trace failed hdaa0: Looking for additional DAC for association 0 (1) hdaa0: Looking for additional ADC for association 1 (2) hdaa0: Tracing input monitor hdaa0: Tracing nid 12 to out hdaa0: Tracing other input monitors hdaa0: Tracing nid 8 to out hdaa0: nid 8 is input monitor hdaa0: Tracing nid 9 to out hdaa0: nid 9 is input monitor hdaa0: Tracing beeper hdaa0: nid 16 traced to out hdaa0: Headphones redirection for association 0 nid=6 using unsolicited responses. hdaa0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref hdaa0: hdaa0: +-------------------+ hdaa0: | DUMPING HDA NODES | hdaa0: +-------------------+ hdaa0: hdaa0: Default Parameter hdaa0: ----------------- hdaa0: Stream cap: 0x00000001 hdaa0: PCM hdaa0: PCM cap: 0x000e007f hdaa0: 16 20 24 bits, 8 11 16 22 32 44 48 KHz hdaa0: IN amp: 0x00270300 hdaa0: OUT amp: 0x80053f3d hdaa0: hdaa0: nid: 2 [DISABLED] hdaa0: Name: audio output hdaa0: Widget cap: 0x00030311 hdaa0: DIGITAL STEREO hdaa0: Stream cap: 0x00000005 hdaa0: AC3 PCM hdaa0: PCM cap: 0x00020060 hdaa0: 16 bits, 44 48 KHz hdaa0: connections: 2 hdaa0: | hdaa0: + [DISABLED] <- nid=1 [GHOST!] [UNKNOWN] (selected) hdaa0: + <- nid=4 [audio input] hdaa0: hdaa0: nid: 3 hdaa0: Name: audio output hdaa0: Widget cap: 0x00000441 hdaa0: PWR PROC STEREO hdaa0: Association: 0 (0x00008001) hdaa0: OSS: pcm (pcm) hdaa0: Stream cap: 0x00000001 hdaa0: PCM hdaa0: PCM cap: 0x000e007f hdaa0: 16 20 24 bits, 8 11 16 22 32 44 48 KHz hdaa0: hdaa0: nid: 4 hdaa0: Name: audio input hdaa0: Widget cap: 0x00100511 hdaa0: PWR STEREO hdaa0: Association: 1 (0x00004001) hdaa0: Stream cap: 0x00000001 hdaa0: PCM hdaa0: PCM cap: 0x0006007f hdaa0: 16 20 bits, 8 11 16 22 32 44 48 KHz hdaa0: connections: 1 hdaa0: | hdaa0: + <- nid=21 [audio selector] hdaa0: hdaa0: nid: 5 hdaa0: Name: pin: Speaker (Fixed) hdaa0: Widget cap: 0x00400187 hdaa0: UNSOL STEREO hdaa0: Association: 0 (0x00000001) hdaa0: Pin cap: 0x0001173f hdaa0: ISC TRQD PDC HP OUT IN VREF[ 50 80 GROUND HIZ ] EAPD hdaa0: Pin config: 0x92174110 hdaa0: Pin control: 0x00000040 OUT hdaa0: EAPD: 0x00000002 hdaa0: Output amp: 0x80053f3d hdaa0: mute=1 step=63 size=5 offset=61 hdaa0: Input amp: 0x00270300 hdaa0: mute=0 step=3 size=39 offset=0 hdaa0: connections: 2 hdaa0: | hdaa0: + [DISABLED] <- nid=3 [audio output] hdaa0: + <- nid=14 [audio mixer] (selected) hdaa0: hdaa0: nid: 6 hdaa0: Name: pin: Headphones (Grey Jack) hdaa0: Widget cap: 0x00400185 hdaa0: UNSOL STEREO hdaa0: Association: 0 (0x00008000) hdaa0: Pin cap: 0x0000001f hdaa0: ISC TRQD PDC HP OUT hdaa0: Pin config: 0x0421201f hdaa0: Pin control: 0x000000c0 HP OUT hdaa0: Output amp: 0x80053f3d hdaa0: mute=1 step=63 size=5 offset=61 hdaa0: connections: 2 hdaa0: | hdaa0: + [DISABLED] <- nid=3 [audio output] hdaa0: + <- nid=14 [audio mixer] (selected) hdaa0: hdaa0: nid: 7 [DISABLED] hdaa0: Name: pin: Line-out (None) hdaa0: Widget cap: 0x00400104 hdaa0: Pin cap: 0x00000010 hdaa0: OUT hdaa0: Pin config: 0x410710f0 hdaa0: Pin control: 0x00000000 hdaa0: Output amp: 0x80053f3d hdaa0: mute=1 step=63 size=5 offset=61 hdaa0: connections: 1 hdaa0: | hdaa0: + [DISABLED] <- nid=15 [audio mixer] [DISABLED] hdaa0: hdaa0: nid: 8 hdaa0: Name: pin: Mic (Grey Jack) hdaa0: Widget cap: 0x00400083 hdaa0: UNSOL STEREO hdaa0: Association: 1 (0x00000001) hdaa0: OSS: mic (mic) hdaa0: Pin cap: 0x00001727 hdaa0: ISC TRQD PDC IN VREF[ 50 80 GROUND HIZ ] hdaa0: Pin config: 0x04a12020 hdaa0: Pin control: 0x00000024 IN VREFs hdaa0: Input amp: 0x00270300 hdaa0: mute=0 step=3 size=39 offset=0 hdaa0: hdaa0: nid: 9 hdaa0: Name: pin: Line-in (Blue Jack) hdaa0: Widget cap: 0x00400187 hdaa0: UNSOL STEREO hdaa0: Association: 1 (0x00004000) hdaa0: OSS: line (line) hdaa0: Pin cap: 0x00001737 hdaa0: ISC TRQD PDC OUT IN VREF[ 50 80 GROUND HIZ ] hdaa0: Pin config: 0x0181302e hdaa0: Pin control: 0x00000024 IN VREFs hdaa0: Output amp: 0x80053f3d hdaa0: mute=1 step=63 size=5 offset=61 hdaa0: Input amp: 0x00270300 hdaa0: mute=0 step=3 size=39 offset=0 hdaa0: connections: 2 hdaa0: | hdaa0: + [DISABLED] <- nid=3 [audio output] (selected) hdaa0: + [DISABLED] <- nid=14 [audio mixer] hdaa0: hdaa0: nid: 10 [DISABLED] hdaa0: Name: pin: SPDIF-out (None) hdaa0: Widget cap: 0x00400301 hdaa0: DIGITAL STEREO hdaa0: Pin cap: 0x00000010 hdaa0: OUT hdaa0: Pin config: 0x4145f0f0 hdaa0: Pin control: 0x00000000 hdaa0: connections: 1 hdaa0: | hdaa0: + <- nid=2 [audio output] [DISABLED] hdaa0: hdaa0: nid: 11 [DISABLED] hdaa0: Name: audio selector hdaa0: Widget cap: 0x00300101 hdaa0: STEREO hdaa0: connections: 6 hdaa0: | hdaa0: + <- nid=3 [audio output] (selected) hdaa0: + <- nid=12 [audio mixer] hdaa0: + <- nid=9 [pin: Line-in (Blue Jack)] hdaa0: + <- nid=14 [audio mixer] hdaa0: + <- nid=5 [pin: Speaker (Fixed)] hdaa0: + <- nid=24 [pin: Mic (Both)] [DISABLED] hdaa0: hdaa0: nid: 12 hdaa0: Name: audio mixer hdaa0: Widget cap: 0x00200101 hdaa0: STEREO hdaa0: Association: 1 (0x00000001) hdaa0: OSS: mic hdaa0: connections: 2 hdaa0: | hdaa0: + <- nid=30 [audio selector] hdaa0: + [DISABLED] <- nid=31 [audio selector] [DISABLED] hdaa0: hdaa0: nid: 13 hdaa0: Name: audio selector hdaa0: Widget cap: 0x0030010c hdaa0: Association: -2 (0x00000000) hdaa0: OSS: speaker hdaa0: Output amp: 0x800b0f0f hdaa0: mute=1 step=15 size=11 offset=15 hdaa0: connections: 2 hdaa0: | hdaa0: + <- nid=16 [beep widget] (selected) hdaa0: + [DISABLED] <- nid=22 [pin: Digital-out (Fixed)] [DISABLED] hdaa0: hdaa0: nid: 14 hdaa0: Name: audio mixer hdaa0: Widget cap: 0x00200101 hdaa0: STEREO hdaa0: Association: 0 (0x00008001) hdaa0: OSS: pcm, speaker, line, mic hdaa0: connections: 8 hdaa0: | hdaa0: + <- nid=13 [audio selector] hdaa0: + <- nid=17 [audio selector] hdaa0: + <- nid=18 [audio selector] hdaa0: + <- nid=19 [audio selector] hdaa0: + [DISABLED] <- nid=26 [audio selector] [DISABLED] hdaa0: + [DISABLED] <- nid=27 [audio selector] [DISABLED] hdaa0: + [DISABLED] <- nid=28 [audio selector] [DISABLED] hdaa0: + [DISABLED] <- nid=29 [audio selector] [DISABLED] hdaa0: hdaa0: nid: 15 [DISABLED] hdaa0: Name: audio mixer hdaa0: Widget cap: 0x00200100 hdaa0: connections: 1 hdaa0: | hdaa0: + <- nid=11 [audio selector] [DISABLED] hdaa0: hdaa0: nid: 16 hdaa0: Name: beep widget hdaa0: Widget cap: 0x00700000 hdaa0: Association: -2 (0x00000000) hdaa0: OSS: speaker (speaker) hdaa0: hdaa0: nid: 17 hdaa0: Name: audio selector hdaa0: Widget cap: 0x0030010d hdaa0: STEREO hdaa0: Association: 0 (0x00008001) hdaa0: OSS: pcm hdaa0: Output amp: 0x80051f17 hdaa0: mute=1 step=31 size=5 offset=23 hdaa0: connections: 1 hdaa0: | hdaa0: + <- nid=3 [audio output] hdaa0: hdaa0: nid: 18 hdaa0: Name: audio selector hdaa0: Widget cap: 0x0030010d hdaa0: STEREO hdaa0: Association: -2 (0x00000000) hdaa0: OSS: mic hdaa0: Output amp: 0x80051f17 hdaa0: mute=1 step=31 size=5 offset=23 hdaa0: connections: 1 hdaa0: | hdaa0: + <- nid=8 [pin: Mic (Grey Jack)] hdaa0: hdaa0: nid: 19 hdaa0: Name: audio selector hdaa0: Widget cap: 0x0030010d hdaa0: STEREO hdaa0: Association: -2 (0x00000000) hdaa0: OSS: line hdaa0: Output amp: 0x80051f17 hdaa0: mute=1 step=31 size=5 offset=23 hdaa0: connections: 1 hdaa0: | hdaa0: + <- nid=9 [pin: Line-in (Blue Jack)] hdaa0: hdaa0: nid: 20 [DISABLED] hdaa0: Name: power widget hdaa0: Widget cap: 0x00500500 hdaa0: PWR hdaa0: connections: 13 hdaa0: | hdaa0: + <- nid=13 [audio selector] (selected) hdaa0: + <- nid=14 [audio mixer] hdaa0: + <- nid=15 [audio mixer] [DISABLED] hdaa0: + <- nid=16 [beep widget] hdaa0: + <- nid=19 [audio selector] hdaa0: + <- nid=20 [power widget] [DISABLED] hdaa0: + <- nid=21 [audio selector] hdaa0: + <- nid=22 [pin: Digital-out (Fixed)] [DISABLED] hdaa0: + <- nid=23 [pin: AUX (None)] [DISABLED] hdaa0: + <- nid=24 [pin: Mic (Both)] [DISABLED] hdaa0: + <- nid=25 [pin: CD (None)] [DISABLED] hdaa0: + <- nid=26 [audio selector] [DISABLED] hdaa0: + <- nid=29 [audio selector] [DISABLED] hdaa0: hdaa0: nid: 21 hdaa0: Name: audio selector hdaa0: Widget cap: 0x0030010d hdaa0: STEREO hdaa0: Association: 1 (0x00004001) hdaa0: OSS: line, mic hdaa0: Output amp: 0x80050f00 hdaa0: mute=1 step=15 size=5 offset=0 hdaa0: connections: 8 hdaa0: | hdaa0: + <- nid=12 [audio mixer] hdaa0: + <- nid=9 [pin: Line-in (Blue Jack)] (selected) hdaa0: + [DISABLED] <- nid=14 [audio mixer] hdaa0: + [DISABLED] <- nid=15 [audio mixer] [DISABLED] hdaa0: + [DISABLED] <- nid=25 [pin: CD (None)] [DISABLED] hdaa0: + [DISABLED] <- nid=5 [pin: Speaker (Fixed)] hdaa0: + [DISABLED] <- nid=24 [pin: Mic (Both)] [DISABLED] hdaa0: + [DISABLED] <- nid=23 [pin: AUX (None)] [DISABLED] hdaa0: hdaa0: nid: 22 [DISABLED] hdaa0: Name: pin: Digital-out (Fixed) hdaa0: Widget cap: 0x00400000 hdaa0: Pin cap: 0x00000020 hdaa0: IN hdaa0: Pin config: 0x995711f0 hdaa0: Pin control: 0x00000000 hdaa0: hdaa0: nid: 23 [DISABLED] hdaa0: Name: pin: AUX (None) hdaa0: Widget cap: 0x00400081 hdaa0: UNSOL STEREO hdaa0: Pin cap: 0x00000027 hdaa0: ISC TRQD PDC IN hdaa0: Pin config: 0x5993e0f0 hdaa0: Pin control: 0x00000000 hdaa0: hdaa0: nid: 24 [DISABLED] hdaa0: Name: pin: Mic (Both) hdaa0: Widget cap: 0x00400187 hdaa0: UNSOL STEREO hdaa0: Pin cap: 0x00001737 hdaa0: ISC TRQD PDC OUT IN VREF[ 50 80 GROUND HIZ ] hdaa0: Pin config: 0xf0a79159 hdaa0: Pin control: 0x00000000 hdaa0: Output amp: 0x80053f3d hdaa0: mute=1 step=63 size=5 offset=61 hdaa0: Input amp: 0x00270300 hdaa0: mute=0 step=3 size=39 offset=0 hdaa0: connections: 2 hdaa0: | hdaa0: + [DISABLED] <- nid=3 [audio output] (selected) hdaa0: + <- nid=14 [audio mixer] hdaa0: hdaa0: nid: 25 [DISABLED] hdaa0: Name: pin: CD (None) hdaa0: Widget cap: 0x00400001 hdaa0: STEREO hdaa0: Pin cap: 0x00000020 hdaa0: IN hdaa0: Pin config: 0x593310f0 hdaa0: Pin control: 0x00000000 hdaa0: hdaa0: nid: 26 [DISABLED] hdaa0: Name: audio selector hdaa0: Widget cap: 0x0030010d hdaa0: STEREO hdaa0: Output amp: 0x80051f17 hdaa0: mute=1 step=31 size=5 offset=23 hdaa0: connections: 1 hdaa0: | hdaa0: + <- nid=5 [pin: Speaker (Fixed)] hdaa0: hdaa0: nid: 27 [DISABLED] hdaa0: Name: audio selector hdaa0: Widget cap: 0x0030010d hdaa0: STEREO hdaa0: Output amp: 0x80051f17 hdaa0: mute=1 step=31 size=5 offset=23 hdaa0: connections: 1 hdaa0: | hdaa0: + [DISABLED] <- nid=23 [pin: AUX (None)] [DISABLED] hdaa0: hdaa0: nid: 28 [DISABLED] hdaa0: Name: audio selector hdaa0: Widget cap: 0x0030010d hdaa0: STEREO hdaa0: Output amp: 0x80051f17 hdaa0: mute=1 step=31 size=5 offset=23 hdaa0: connections: 1 hdaa0: | hdaa0: + <- nid=24 [pin: Mic (Both)] [DISABLED] hdaa0: hdaa0: nid: 29 [DISABLED] hdaa0: Name: audio selector hdaa0: Widget cap: 0x0030010d hdaa0: STEREO hdaa0: Output amp: 0x80051f17 hdaa0: mute=1 step=31 size=5 offset=23 hdaa0: connections: 1 hdaa0: | hdaa0: + [DISABLED] <- nid=25 [pin: CD (None)] [DISABLED] hdaa0: hdaa0: nid: 30 hdaa0: Name: audio selector hdaa0: Widget cap: 0x0030010d hdaa0: STEREO hdaa0: Association: 1 (0x00000001) hdaa0: OSS: mic hdaa0: Output amp: 0x80000000 hdaa0: mute=1 step=0 size=0 offset=0 hdaa0: connections: 1 hdaa0: | hdaa0: + <- nid=8 [pin: Mic (Grey Jack)] hdaa0: hdaa0: nid: 31 [DISABLED] hdaa0: Name: audio selector hdaa0: Widget cap: 0x0030010d hdaa0: STEREO hdaa0: Output amp: 0x80000000 hdaa0: mute=1 step=0 size=0 offset=0 hdaa0: connections: 1 hdaa0: | hdaa0: + <- nid=24 [pin: Mic (Both)] [DISABLED] hdaa0: pcm0: <Analog Devices AD1981HD HDA CODEC PCM (Analog 2.0+HP/2.0)> at nid 5,6 and 8,9 on hdaa0 pcm0: +--------------------------------------+ pcm0: | DUMPING PCM Playback/Record Channels | pcm0: +--------------------------------------+ pcm0: pcm0: Playback: pcm0: pcm0: Stream cap: 0x00000001 pcm0: PCM pcm0: PCM cap: 0x000e007f pcm0: 16 20 24 bits, 8 11 16 22 32 44 48 KHz pcm0: DAC: 3 pcm0: pcm0: Record: pcm0: pcm0: Stream cap: 0x00000001 pcm0: PCM pcm0: PCM cap: 0x0006007f pcm0: 16 20 bits, 8 11 16 22 32 44 48 KHz pcm0: DAC: 4 pcm0: pcm0: +-------------------------------+ pcm0: | DUMPING Playback/Record Paths | pcm0: +-------------------------------+ pcm0: pcm0: Playback: pcm0: pcm0: nid=5 [pin: Speaker (Fixed)] pcm0: | pcm0: + <- nid=14 [audio mixer] [src: pcm, speaker, line, mic] pcm0: | pcm0: + <- nid=13 [audio selector] [src: speaker] pcm0: | pcm0: + <- nid=16 [beep widget] [src: speaker] pcm0: + <- nid=17 [audio selector] [src: pcm] pcm0: | pcm0: + <- nid=3 [audio output] [src: pcm] pcm0: + <- nid=18 [audio selector] [src: mic] pcm0: | pcm0: + <- nid=8 [pin: Mic (Grey Jack)] [src: mic] pcm0: + <- nid=19 [audio selector] [src: line] pcm0: | pcm0: + <- nid=9 [pin: Line-in (Blue Jack)] [src: line] pcm0: pcm0: nid=6 [pin: Headphones (Grey Jack)] pcm0: | pcm0: + <- nid=14 [audio mixer] [src: pcm, speaker, line, mic] pcm0: | pcm0: + <- nid=13 [audio selector] [src: speaker] pcm0: | pcm0: + <- nid=16 [beep widget] [src: speaker] pcm0: + <- nid=17 [audio selector] [src: pcm] pcm0: | pcm0: + <- nid=3 [audio output] [src: pcm] pcm0: + <- nid=18 [audio selector] [src: mic] pcm0: | pcm0: + <- nid=8 [pin: Mic (Grey Jack)] [src: mic] pcm0: + <- nid=19 [audio selector] [src: line] pcm0: | pcm0: + <- nid=9 [pin: Line-in (Blue Jack)] [src: line] pcm0: pcm0: Record: pcm0: pcm0: nid=4 [audio input] pcm0: | pcm0: + <- nid=21 [audio selector] [src: line, mic] pcm0: | pcm0: + <- nid=12 [audio mixer] [src: mic] pcm0: | pcm0: + <- nid=30 [audio selector] [src: mic] pcm0: | pcm0: + <- nid=8 [pin: Mic (Grey Jack)] [src: mic] pcm0: + <- nid=9 [pin: Line-in (Blue Jack)] [src: line] pcm0: pcm0: +-------------------------+ pcm0: | DUMPING Volume Controls | pcm0: +-------------------------+ pcm0: pcm0: Master Volume (OSS: vol): -91/3dB pcm0: | pcm0: +- ctl 1 (nid 5 in ): -91/3dB (64 steps) + mute pcm0: +- ctl 3 (nid 6 in ): -91/3dB (64 steps) + mute pcm0: +- ctl 8 (nid 13 out): -45/0dB (16 steps) + mute pcm0: +- ctl 9 (nid 17 out): -34/12dB (32 steps) + mute pcm0: +- ctl 10 (nid 18 out): -34/12dB (32 steps) + mute pcm0: +- ctl 11 (nid 19 out): -34/12dB (32 steps) + mute pcm0: pcm0: PCM Volume (OSS: pcm): -34/12dB pcm0: | pcm0: +- ctl 9 (nid 17 out): -34/12dB (32 steps) + mute pcm0: pcm0: Microphone Volume (OSS: mic): 0/30dB pcm0: | pcm0: +- ctl 5 (nid 8 out): 0/30dB (4 steps) pcm0: +- ctl 10 (nid 18 out): -34/12dB (32 steps) + mute pcm0: +- ctl 12 (nid 21 out): 0/22dB (16 steps) + mute pcm0: +- ctl 19 (nid 30 out): mute pcm0: pcm0: Line-in Volume (OSS: line): 0/30dB pcm0: | pcm0: +- ctl 7 (nid 9 out): 0/30dB (4 steps) pcm0: +- ctl 11 (nid 19 out): -34/12dB (32 steps) + mute pcm0: +- ctl 12 (nid 21 out): 0/22dB (16 steps) + mute pcm0: pcm0: Speaker/Beep Volume (OSS: speaker): -45/0dB pcm0: | pcm0: +- ctl 8 (nid 13 out): -45/0dB (16 steps) + mute pcm0: pcm0: Recording Level (OSS: rec): 0/22dB pcm0: | pcm0: +- ctl 12 (nid 21 out): 0/22dB (16 steps) + mute pcm0: +- ctl 19 (nid 30 out): mute pcm0: pcm0: Input Monitoring Level (OSS: igain): -34/0dB pcm0: | pcm0: +- ctl 8 (nid 13 out): -45/0dB (16 steps) + mute pcm0: +- ctl 10 (nid 18 out): -34/12dB (32 steps) + mute pcm0: +- ctl 11 (nid 19 out): -34/12dB (32 steps) + mute pcm0: pcm0: Mixer "vol": pcm0: Mixer "pcm": pcm0: Mixer "speaker": pcm0: Mixer "line": pcm0: Mixer "mic": pcm0: Mixer "rec": pcm0: Mixer "igain": pcm0: Mixer "ogain": pcm0: clone manager: deadline=750ms flags=0x8000001e pcm0: sndbuf_setmap 6080000, 10000; 0xffffff80cd87e000 -> 6080000 pcm0: sndbuf_setmap 60c0000, 10000; 0xffffff80cd8be000 -> 60c0000 hdacc1: <Lucent/Agere Systems (0x1040) HDA CODEC> at cad 1 on hdac0 hdacc1: Root Node at nid=0: 1 subnodes 1-1 unknown: <Lucent/Agere Systems (0x1040) HDA CODEC Modem Function Group> at nid 1 on hdacc1 (no driver attached) usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 480Mbps High Speed USB v2.0 acpi_tz0: _AC3: temperature 77.0 >= setpoint 40.0 acpi_tz0: _AC2: temperature 77.0 >= setpoint 50.0 acpi_tz0: _AC1: temperature 77.0 >= setpoint 60.0 acpi_tz0: _AC0: temperature 77.0 >= setpoint 70.0 acpi_tz0: switched from NONE to _AC0: 77.0C ugen0.1: <ATI> at usbus0 uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <ATI> at usbus1 uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <ATI> at usbus2 uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <ATI> at usbus3 uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <ATI> at usbus4 uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <ATI> at usbus5 uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 ahcich0: AHCI reset... ahcich0: SATA connect time=1800us status=00000113 ahcich0: AHCI reset: device found ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ahcich0: AHCI reset: device ready after 100ms (aprobe0:ahcich0:0:0:0): SIGNATURE: 0000 ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=00 stat1=00 devices=0x10000 (aprobe1:ata0:0:0:0): SIGNATURE: eb14 battery0: battery initialization start battery1: battery initialization start acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times acpi_tz0: _AC3: temperature 77.0 >= setpoint 40.0 acpi_tz0: _AC2: temperature 77.0 >= setpoint 50.0 acpi_tz0: _AC1: temperature 77.0 >= setpoint 60.0 acpi_tz0: _AC3: temperature 77.0 >= setpoint 40.0 acpi_tz0: _AC2: temperature 77.0 >= setpoint 50.0 acpi_tz0: _AC1: temperature 77.0 >= setpoint 60.0 battery0: battery initialization done, tried 1 times uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered (probe0:ctl2cam0:0:1:0): Error 6, Unretryable error pass0 at ahcich0 bus 0 scbus0 target 0 lun 0 pass0: GEOM: new disk cd0 <ST9160821AS 3.BHE> ATA-7 SATA 1.x device pass0: Serial Number 5MA83WKD pass0: 150.000MB/s transfers ((cd0:ata0:0:0:0): SCSI status error (cd0:ata0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (cd0:ata0:0:0:0): CAM status: SCSI Status Error (cd0:ata0:0:0:0): SCSI status: Check Condition (cd0:ata0:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray closed) (cd0:ata0:0:0:0): Error 6, Unretryable error cd0 at ata0 bus 0 scbus1 target 0 lun 0 cd0: <MATSHITA DVD-RAM UJ-861H 1.50> Removable CD-ROM SCSI-0 device cd0: Serial Number HE58 101390 cd0: 16.700MB/s transfers (WDMA2, ATAPI 12bytes, PIO 65534bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed SATA 1.x, UDMA5, PIO 8192bytes) pass1 at ata0 bus 0 scbus1 target 0 lun 0 pass1: <MATSHITA DVD-RAM UJ-861H 1.50> Removable CD-ROM SCSI-0 device pass1: Serial Number HE58 101390 pass1: 16.700MB/s transfers (WDMA2, ATAPI 12bytes, PIO 65534bytes) ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <ST9160821AS 3.BHE> ATA-7 SATA 1.x device ada0: Serial Number 5MA83WKD ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) ada0: 152627MB (312581808 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad4 (cd0:ata0:0:0:0): SCSI status error (cd0:ata0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (cd0:ata0:0:0:0): CAM status: SCSI Status Error (cd0:ata0:0:0:0): SCSI status: Check Condition (cd0:ata0:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray closed) (cd0:ata0:0:0:0): Error 6, Unretryable error SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 TSC timecounter discards lower 7 bit(s) Timecounter "TSC-low" frequency 15586291 Hz quality -100 WARNING: WITNESS option enabled, expect reduced performance. (cd0:ata0:0:0:0): SCSI status error (cd0:ata0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (cd0:ata0:0:0:0): CAM status: SCSI Status Error (cd0:ata0:0:0:0): SCSI status: Check Condition (cd0:ata0:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray closed) (cd0:ata0:0:0:0): Error 6, Unretryable error (cd0:ata0:0:0:0): SCSI status error (cd0:ata0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (cd0:ata0:0:0:0): CAM status: SCSI Status Error (cd0:ata0:0:0:0): SCSI status: Check Condition (cd0:ata0:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray closed) (cd0:ata0:0:0:0): Error 6, Unretryable error GEOM: new disk ada0 Root mount waiting for: usbus5 uhub5: 10 ports with 10 removable, self powered Trying to mount root from ufs:/dev/ad4s1a [rw]... start_init: trying /sbin/init acpi_tz0: _AC3: temperature 71.0 >= setpoint 40.0 acpi_tz0: _AC2: temperature 71.0 >= setpoint 50.0 acpi_tz0: _AC1: temperature 71.0 >= setpoint 60.0 -- Anton Shterenlikht Room 2.6, Queen's Building Mech Eng Dept Bristol University University Walk, Bristol BS8 1TR, UK Tel: +44 (0)117 331 5944 Fax: +44 (0)117 929 4423Received on Thu May 03 2012 - 13:36:23 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:26 UTC