Hi all, I am giving netmap a try and have tested it on my Realtech and Intel 1G NICs (by using r8169 and e1000e kernel modules), and it is working fine. However, I am facing problem while running it on my intel 10G NIC (82598EB 10-Gigabit AF Dual Port Network Connection). Whenever, I run the pkt-gen example with 10G interface, it shows me following error ======================================================================= sudo ./pkt-gen -i eth1 -f tx -l 60 extract_ip_range [119] extract IP range from 10.0.0.1 extract_ip_range [129] 10.0.0.1 starts at 10.0.0.1 extract_ip_range [119] extract IP range from 10.1.0.1 extract_ip_range [129] 10.1.0.1 starts at 10.1.0.1 extract_mac_range [135] extract MAC range from 00:1b:21:ce:f3:6a extract_mac_range [150] 00:1b:21:ce:f3:6a starts at 0:1b:21:ce:f3:6a extract_mac_range [135] extract MAC range from ff:ff:ff:ff:ff:ff extract_mac_range [150] ff:ff:ff:ff:ff:ff starts at ff:ff:ff:ff:ff:ff main [1053] map size is 207712 Kb main [1059] Unable to get if info for eth1 main [1066] bad nthreads 1, have 0 queues main [1075] mmapping 207712 Kbytes main [1094] Unable to register interface eth1 Sending on eth1: 0 queues, 1 threads and 1 cpus. 10.0.0.1 -> 10.1.0.1 (00:1b:21:ce:f3:6a -> ff:ff:ff:ff:ff:ff) main [1128] Wait 2 secs for phy reset main [1130] Ready... main [1181] Unable to register eth1 main [1242] 0 pps Sent 0 packets, 60 bytes each, in 0.00 seconds. ======================================================================= Any idea that what's going wrong here? Regards Tahir Rauf (+92) 312-7767761 -------------------------------------------------------------------------------------------------------------------------------------------------------------- This electronic message transmission contains information from the Company that may be proprietary, confidential and/or privileged. The information is intended only for the use of the individuals or entity named above. If you are not the intended recipient, be aware that any disclosure, copying or distribution or use of the contents of this information is prohibited. If you have received this electronic transmission in error, please notify the sender immediately by replying to this email.Received on Tue Feb 19 2013 - 04:51:56 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:35 UTC