On Mon, Feb 18, 2013 at 9:51 PM, Tahir Rauf <tahir.rauf1_at_gmail.com> wrote: > Hi all, > > I am giving netmap a try and have tested it on my Realtech and Intel 1G > NICs (by using r8169 and e1000e kernel modules), and it is working fine. > > However, I am facing problem while running it on my intel 10G NIC (82598EB > 10-Gigabit AF Dual Port Network Connection). Whenever, I run the pkt-gen > example with 10G interface, it shows me following error > > likely you are running an unpatched version of the ixgbe driver. Does dmesg say anything about netmap when loading the ixgbe driver ? (also which version of the code are you using ? it seems you are running linux...) cheers luigi ======================================================================= > sudo ./pkt-gen -i eth1 -f tx -l 60 > extract_ip_range [119] extract IP range from 10.0.0.1 > extract_ip_range [129] 10.0.0.1 starts at 10.0.0.1 > extract_ip_range [119] extract IP range from 10.1.0.1 > extract_ip_range [129] 10.1.0.1 starts at 10.1.0.1 > extract_mac_range [135] extract MAC range from 00:1b:21:ce:f3:6a > extract_mac_range [150] 00:1b:21:ce:f3:6a starts at 0:1b:21:ce:f3:6a > extract_mac_range [135] extract MAC range from ff:ff:ff:ff:ff:ff > extract_mac_range [150] ff:ff:ff:ff:ff:ff starts at ff:ff:ff:ff:ff:ff > main [1053] map size is 207712 Kb > main [1059] Unable to get if info for eth1 > main [1066] bad nthreads 1, have 0 queues > main [1075] mmapping 207712 Kbytes > main [1094] Unable to register interface eth1 > Sending on eth1: 0 queues, 1 threads and 1 cpus. > 10.0.0.1 -> 10.1.0.1 (00:1b:21:ce:f3:6a -> ff:ff:ff:ff:ff:ff) > main [1128] Wait 2 secs for phy reset > main [1130] Ready... > main [1181] Unable to register eth1 > main [1242] 0 pps > Sent 0 packets, 60 bytes each, in 0.00 seconds. > ======================================================================= > > Any idea that what's going wrong here? > > Regards > > Tahir Rauf > (+92) 312-7767761 > > -------------------------------------------------------------------------------------------------------------------------------------------------------------- > This electronic message transmission contains information from the Company > that may be proprietary, confidential and/or privileged. The information is > intended only for the use of the individuals or entity named above. If you > are not the intended recipient, be aware that any disclosure, copying or > distribution or use of the contents of this information is prohibited. If > you have received this electronic transmission in error, please notify the > sender immediately by replying to this email. > _______________________________________________ > freebsd-current_at_freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org" > -- -----------------------------------------+------------------------------- Prof. Luigi RIZZO, rizzo_at_iet.unipi.it . Dip. di Ing. dell'Informazione http://www.iet.unipi.it/~luigi/ . Universita` di Pisa TEL +39-050-2211611 . via Diotisalvi 2 Mobile +39-338-6809875 . 56122 PISA (Italy) -----------------------------------------+-------------------------------Received on Tue Feb 19 2013 - 04:57:06 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:35 UTC