Thanks Eric, in case of HP Proliant DL120 G7 server, BIOS's configuration needs to be "OS Control Mode". The similar would apply to other systems. Cheers, - Michio On May 18, 2013, at 10:07 PM, Eric van Gyzen wrote: > On 05/18/2013 10:09 AM, Michio Honda wrote: >> Hi, >> >> I'm trying to experiment with downclocking CPU. >> My environment is 10.0-CURRENT amd64. >> >> However, my CPU (Xeon E31220) seems not to be supported by the cpufreq module, thus dmesg shows: >> est0: <Enhanced SpeedStep Frequency Control> on cpu0 >> est: CPU supports Enhanced Speedstep, but is not recognized. >> >> As a result, although sysctl -a shows the list of available frequency values (dev.cpu.0.freq_levels: 3093/-1 2706/-1 2319/-1 1933/-1 1546/-1 1159/-1 773/-1 386/-1 >> dev.), I cannot set the value (the error message is "sysctl: dev.cpu.0.freq=773: Device not configured"). >> >> Do you have any idea to change CPU frequency for this CPU? > > In my experience, the "not recognized" message indicates that the feature is not enabled in the BIOS. > > Eric > _______________________________________________ > freebsd-current_at_freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org" >Received on Mon May 27 2013 - 10:13:49 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:38 UTC