Building/installing is fine, and building, installing, and booting stable/9 _at_r264061 on the same hardware (different slice) is fine. (I didn't rebuild stable/10 this morning, asth only change was to src/cddl/contrib/opensolaris/cmd/zpool/zpool_main.c, and I don't use ZFS. stable/10 works fine on the same hardware _at_r264032.) And on my laptop, I had no problems (using AHCI). The build machine, though, starts OK, then comes to an inglorious end: Booting... GDB: no debug ports present KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2014 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 11.0-CURRENT #1455 r264070M/264070:1100016: Thu Apr 3 07:48:16 PDT 2014 root_at_freebeast.catwhisker.org:/common/S4/obj/usr/src/sys/GENERIC i386 FreeBSD clang version 3.4 (tags/RELEASE_34/final 197956) 20140216 WARNING: WITNESS option enabled, expect reduced performance. CPU: Intel(R) Xeon(TM) CPU 3.60GHz (3600.21-MHz 686-class CPU) Origin="GenuineIntel" Id=0xf41 Family=0xf Model=0x4 Stepping=1 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x659d<SSE3,DTES64,MON,DS_CPL,EST,TM2,CNXT-ID,CX16,xTPR> AMD Features=0x20100000<NX,LM> TSC: P-state invariant real memory = 2147483648 (2048 MB) avail memory = 2080395264 (1984 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <PTLTD APIC > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 2 package(s) x 1 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 6 random device not loaded; using insecure entropy ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 24-47 on motherboard ioapic2 <Version 2.0> irqs 48-71 on motherboard random: <Software, Yarrow> initialized kbd1 at kbdmux0 acpi0: <PTLTD RSDT> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <unknown> at device 0.1 (no driver attached) pci0: <base peripheral> at device 1.0 (no driver attached) pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1 pci3: <ACPI PCI bus> on pcib3 em0: <Intel(R) PRO/1000 Legacy Network Connection 1.0.6> port 0x2040-0x207f mem 0xd8220000-0xd823ffff irq 55 at device 2.1 on pci3 em0: Ethernet address: 00:30:48:2d:32:6b pcib4: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> irq 16 at device 6.0 on pci0 pci5: <ACPI PCI bus> on pcib5 uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x1400-0x141f irq 16 at device 29.0 on pci0 usbus0 on uhci0 uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x1420-0x143f irq 19 at device 29.1 on pci0 usbus1 on uhci1 uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0x1440-0x145f irq 18 at device 29.2 on pci0 usbus2 on uhci2 uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0x1460-0x147f irq 16 at device 29.3 on pci0 usbus3 on uhci3 ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem 0xd8001000-0xd80013ff irq 23 at device 29.7 on pci0 usbus4: EHCI version 1.0 usbus4 on ehci0 pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci6: <ACPI PCI bus> on pcib6 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x14a0-0x14af at device 31.1 on pci0 ata0: <ATA channel> at channel 0 on atapci0 ata1: <ATA channel> at channel 1 on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_button0: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: console (9600,n,8,1) uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fd0: <1440-KB 3.5" drive> on fdc0 drive 0 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff,0xca000-0xcafff,0xcb000-0xcf7ff pnpid ORM0000 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: parallel port not found. acpi_perf0: <ACPI CPU Frequency Control> on cpu0 acpi_perf1: <ACPI CPU Frequency Control> on cpu1 p4tcc0: <CPU Frequency Thermal Control> on cpu0 p4tcc1: <CPU Frequency Thermal Control> on cpu1 Timecounters tick every 1.000 msec random: unblocking device. usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 usbus4: 480Mbps High Speed USB v2.0 ugen4.1: <Intel> at usbus4 uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered ata1: DMA limited to UDMA33, controller found non-ATA66 cable cd0 at ata1 bus 0 scbus1 target 1 lun 0 uhub3: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered cd0: <MATSHITA DVD-ROM SR-8178 PZ16> Removable CD-ROM SCSI-0 device SMP: AP CPU #1 Launched! cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)Timecounter "TSC-low" frequency 1800104058 Hz quality 1000 WARNING: WITNESS option enabled, expect reduced performance. cd0: Attempt to query device size failed: NOT READY, Medium not present Root mount waiting for: usbus4 Root mount waiting for: usbus4 Root mount waiting for: usbus4 uhub4: 8 ports with 8 removable, self powered Trying to mount root from ufs:/dev/aacd0s4a [rw]... mountroot: waiting for device /dev/aacd0s4a ... Mounting from ufs:/dev/aacd0s4a failed with error 19. Loader variables: vfs.root.mountfrom=ufs:/dev/aacd0s4a vfs.root.mountfrom.options=rw Manual root filesystem specification: <fstype>:<device> [options] Mount <device> using filesystem <fstype> and with the specified (optional) option list. eg. ufs:/dev/da0s1a zfs:tank cd9660:/dev/acd0 ro (which is equivalent to: mount -t cd9660 -o ro /dev/acd0 /) ? List valid disk boot devices . Yield 1 second (for background tasks) <empty line> Abort manual input mountroot> ? List of GEOM managed disk devices: cd0 fd0 mountroot> So... I have serial console access; is there any debugging I might do to help figure out what's wrong? Or is what's wrong already known? I have been able to reboot from this point to one of the other slices; I could probably also unload the default kernel & load yesterday's (err... make that "the day before's" -- yesterday's didn't build -- _at_r263983). Thanks! Peace, david -- David H. Wolfskill david_at_catwhisker.org Taliban: Evil cowards with guns afraid of truth from a 14-year old girl. See http://www.catwhisker.org/~david/publickey.gpg for my public key.
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:48 UTC