On Thu, Apr 03, 2014 at 12:06:51PM -0400, Benjamin Kaduk wrote: > ... > I'm also having some trouble booting (into single user mode, so as to run > the installworld), at r264039.... Sympathy.... > That would seem to indicate some hardware problem or > timing issues more than a problem with the code itself, Maybe.... > so I had been holding off on posting until I could get more information. Fair enough. > Unfortunately, my serial console is not working at the moment, so getting > more information is a bit challenging. Diffing the dmesg from the good > and bad boots would probably be helpful for you to do. > .... OK; here it is. I was able to boot from the last-built kernel (01 Apr): --- ok 2014-04-03 09:12:45.000000000 -0700 +++ fail 2014-04-03 09:13:16.000000000 -0700 _at__at_ -6,11 +6,11 _at__at_ Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. -FreeBSD 11.0-CURRENT #1453 r263983M/263984:1100016: Tue Apr 1 08:09:27 PDT 2014 +FreeBSD 11.0-CURRENT #1455 r264070M/264070:1100016: Thu Apr 3 07:48:16 PDT 2014 root_at_freebeast.catwhisker.org:/common/S4/obj/usr/src/sys/GENERIC i386 FreeBSD clang version 3.4 (tags/RELEASE_34/final 197956) 20140216 WARNING: WITNESS option enabled, expect reduced performance. -CPU: Intel(R) Xeon(TM) CPU 3.60GHz (3600.20-MHz 686-class CPU) +CPU: Intel(R) Xeon(TM) CPU 3.60GHz (3600.21-MHz 686-class CPU) Origin="GenuineIntel" Id=0xf41 Family=0xf Model=0x4 Stepping=1 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x659d<SSE3,DTES64,MON,DS_CPL,EST,TM2,CNXT-ID,CX16,xTPR> _at__at_ -49,18 +49,10 _at__at_ pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1 pci2: <ACPI PCI bus> on pcib2 -aac0: <Adaptec SCSI RAID 2200S> mem 0xdc000000-0xdfffffff irq 24 at device 1.0 on pci2 -aac0: Enable Raw I/O -aac0: New comm. interface enabled -aac0: Adaptec 2200S, aac driver 2.1.9-1 -aacp0 on aac0 -aacp1 on aac0 pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1 pci3: <ACPI PCI bus> on pcib3 -em0: <Intel(R) PRO/1000 Legacy Network Connection 1.0.6> port 0x2000-0x203f mem 0xd8200000-0xd821ffff irq 54 at device 2.0 on pci3 -em0: Ethernet address: 00:30:48:2d:32:6a -em1: <Intel(R) PRO/1000 Legacy Network Connection 1.0.6> port 0x2040-0x207f mem 0xd8220000-0xd823ffff irq 55 at device 2.1 on pci3 -em1: Ethernet address: 00:30:48:2d:32:6b +em0: <Intel(R) PRO/1000 Legacy Network Connection 1.0.6> port 0x2040-0x207f mem 0xd8220000-0xd823ffff irq 55 at device 2.1 on pci3 +em0: Ethernet address: 00:30:48:2d:32:6b pcib4: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> irq 16 at device 6.0 on pci0 _at__at_ -78,8 +70,6 _at__at_ usbus4 on ehci0 pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci6: <ACPI PCI bus> on pcib6 -vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0xd9000000-0xd9ffffff,0xd8300000-0xd8300fff irq 17 at device 1.0 on pci6 -vgapci0: Boot video device isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x14a0-0x14af at device 31.1 on pci0 _at__at_ -110,10 +100,6 _at__at_ p4tcc0: <CPU Frequency Thermal Control> on cpu0 p4tcc1: <CPU Frequency Thermal Control> on cpu1 Timecounters tick every 1.000 msec -aacd0 on aac0 -aacd0: 34970MB (71619584 sectors) -aacd1 on aac0 -aacd1: 69974MB (143307008 sectors) random: unblocking device. usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 _at__at_ -132,59 +118,45 _at__at_ uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered -uhub2: 2 ports with 2 removable, self powered ata1: DMA limited to UDMA33, controller found non-ATA66 cable +cd0 at ata1 bus 0 scbus1 target 1 lun 0 uhub3: 2 ports with 2 removable, self powered -uhub4: 8 ports with 8 removable, self powered -ses0 at aacp0 bus 0 scbus0 target 6 lun 0 -ses0: <SUPER GEM318 0> Fixed Uninstalled SCSI-2 device -ses0: 3.300MB/s transfers -ses0: SAF-TE Compliant Device -pass0 at aacp0 bus 0 scbus0 target 0 lun 0 -pass0: cd0 at ata1 bus 0 scbus3 target 1 lun 0 +uhub2: 2 ports with 2 removable, self powered cd0: <MATSHITA DVD-ROM SR-8178 PZ16> Removable CD-ROM SCSI-0 device -cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) -cd0: Attempt to query device size failed: NOT READY, Medium not present -<SEAGATE ST336754LC 0003> Fixed Uninstalled SCSI-3 device -pass0: 0KB/s transfers -pass1 at aacp0 bus 0 scbus0 target 1 lun 0 -pass1: <SEAGATE ST336754LC 0003> Fixed Uninstalled SCSI-3 device -pass1: 0KB/s transfers -pass2 at aacp0 bus 0 scbus0 target 2 lun 0 -pass2: <SEAGATE ST373454LC 0005> Fixed Uninstalled SCSI-3 device -pass2: 0KB/s transfers -pass3 at aacp0 bus 0 scbus0 target 3 lun 0 -pass3: <SEAGATE ST373454LC 0005> Fixed Uninstalled SCSI-3 device -pass3: 0KB/s transfers SMP: AP CPU #1 Launched! -Timecounter "TSC-low" frequency 1800101709 Hz quality 1000 +cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)Timecounter "TSC-low" frequency 1800104058 Hz quality 1000 WARNING: WITNESS option enabled, expect reduced performance. + +cd0: Attempt to query device size failed: NOT READY, Medium not present +Root mount waiting for: usbus4 +Root mount waiting for: usbus4 +Root mount waiting for: usbus4 +uhub4: 8 ports with 8 removable, self powered Trying to mount root from ufs:/dev/aacd0s4a [rw]... -Enter full pathname of shell or RETURN for /bin/sh: -Cannot read termcap database; -using dumb terminal settings. -# swapon -a && fsck -p && mount -a -swapon: adding /dev/aacd0s4b as swap device -swapon: adding /dev/aacd1s1b as swap device -/dev/aacd0s4a: FILE SYSTEM CLEAN; SKIPPING CHECKS -/dev/aacd0s4a: clean, 132066 free (2754 frags, 16164 blocks, 0.7% fragmentation) -/dev/aacd0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS -/dev/aacd0s1a: clean, 149294 free (1630 frags, 18458 blocks, 0.4% fragmentation) -/dev/aacd1s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS -/dev/aacd1s1e: clean, 2551080 free (182808 frags, 296034 blocks, 1.4% fragmentation) -/dev/aacd0s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS -/dev/aacd0s1d: clean, 186537 free (38345 frags, 18524 blocks, 4.3% fragmentation) -/dev/aacd1s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS -/dev/aacd1s1d: clean, 812734 free (69270 frags, 92933 blocks, 0.7% fragmentation) -/dev/aacd0s2a: FILE SYSTEM CLEAN; SKIPPING CHECKS -/dev/aacd0s2a: clean, 158485 free (1613 frags, 19609 blocks, 0.4% fragmentation) -/dev/aacd0s2d: FILE SYSTEM CLEAN; SKIPPING CHECKS -/dev/aacd0s2d: clean, 121825 free (42161 frags, 9958 blocks, 4.7% fragmentation) -/dev/aacd0s3a: FILE SYSTEM CLEAN; SKIPPING CHECKS -/dev/aacd0s3a: clean, 145054 free (2446 frags, 17826 blocks, 0.7% fragmentation) -/dev/aacd0s3d: FILE SYSTEM CLEAN; SKIPPING CHECKS -/dev/aacd0s3d: clean, 356113 free (21497 frags, 41827 blocks, 2.4% fragmentation) -/dev/aacd0s4d: FILE SYSTEM CLEAN; SKIPPING CHECKS -/dev/aacd0s4d: clean, 215512 free (39192 frags, 22040 blocks, 4.4% fragmentation) -/dev/aacd0s4f: FILE SYSTEM CLEAN; SKIPPING CHECKS -/dev/aacd0s4f: clean, 2092789 free (557 frags, 261529 blocks, 0.0% fragmentation) +mountroot: waiting for device /dev/aacd0s4a ... +Mounting from ufs:/dev/aacd0s4a failed with error 19. + +Loader variables: + vfs.root.mountfrom=ufs:/dev/aacd0s4a + vfs.root.mountfrom.options=rw + +Manual root filesystem specification: + <fstype>:<device> [options] + Mount <device> using filesystem <fstype> + and with the specified (optional) option list. + + eg. ufs:/dev/da0s1a + zfs:tank + cd9660:/dev/acd0 ro + (which is equivalent to: mount -t cd9660 -o ro /dev/acd0 /) + + ? List valid disk boot devices + . Yield 1 second (for background tasks) + <empty line> Abort manual input + +mountroot> ? + +List of GEOM managed disk devices: + cd0 fd0 + +mountroot> The part: pci2: <ACPI PCI bus> on pcib2 -aac0: <Adaptec SCSI RAID 2200S> mem 0xdc000000-0xdfffffff irq 24 at device 1.0 on pci2 -aac0: Enable Raw I/O -aac0: New comm. interface enabled -aac0: Adaptec 2200S, aac driver 2.1.9-1 -aacp0 on aac0 -aacp1 on aac0 pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1 looks a tad suspicious to me. Peace, david -- David H. Wolfskill david_at_catwhisker.org Taliban: Evil cowards with guns afraid of truth from a 14-year old girl. See http://www.catwhisker.org/~david/publickey.gpg for my public key.
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:48 UTC