Re: Huawei E3272 tester needed

On Tue, 16 Sep 2014 21:55:50 +0200
Maciej Milewski <milu_at_dat.pl> wrote:

> On 16.09.2014 16:52, Milan Obuch wrote:
> > On Tue, 16 Sep 2014 09:40:45 +0200
> > Nick Hibma <nick_at_van-laarhoven.org> wrote:
> >
> >> Hi,
> >>
> >> Is there someone who is able to test support for the Huawei E3272
> >> card with CURRENT after 269584? I have not been able to confirm
> >> that it works.
> >>
> >> Thanks in advance.
> >>
> >> Nick
> >>
> > Hi,
> >
> > I did fresh svn update, rebuilt world+kernel, but it does not work
> > for me...

[ snip ]

> > I tried attach/detach device beore and after loading u3g (just in
> > case...) and if_cdce kernel modules, but I saw no changes.
> >
> > From 'usbconfig dump_device_desc':
> >
> > ugen1.3: <HUAWEI Mobile HUAWEI Technology> at usbus1, cfg=0 md=HOST
> > spd=HIGH (480Mbps) pwr=ON (500mA)
> >
> >   bLength = 0x0012
> >   bDescriptorType = 0x0001
> >   bcdUSB = 0x0200
> >   bDeviceClass = 0x0000
> >   bDeviceSubClass = 0x0000
> >   bDeviceProtocol = 0x0000
> >   bMaxPacketSize0 = 0x0040
> >   idVendor = 0x12d1
> >   idProduct = 0x1f01
> >   bcdDevice = 0x0102
> >   iManufacturer = 0x0002  <HUAWEI Technology>
> >   iProduct = 0x0001  <HUAWEI Mobile>
> >   iSerialNumber = 0x0004  <FFFFFFFFFFFFFFFF>
> >   bNumConfigurations = 0x0001
> >
> > If anything else is important, let me know.
> >
> > Regards,
> > Milan
>
> Try ejecting first this cd2 drive by cdcontrol eject or camcontrol
> eject. I had such scenario with other usb device and that helped.
> 

Nothing.

# camcontrol eject cd2
Unit stopped successfully, Media ejected

That's all. No new device created, neither in /dev directory nor in
ifconfig listing. Nothing in console log.

From 'usbconfig dump_all_config_desc':

ugen1.3: <HUAWEI Mobile HUAWEI Technology> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA)

 Configuration index 0

    bLength = 0x0009 
    bDescriptorType = 0x0002 
    wTotalLength = 0x0020 
    bNumInterfaces = 0x0001 
    bConfigurationValue = 0x0001 
    iConfiguration = 0x0003  <Huawei Configuration>
    bmAttributes = 0x0080 
    bMaxPower = 0x00fa 

    Interface 0
      bLength = 0x0009 
      bDescriptorType = 0x0004 
      bInterfaceNumber = 0x0000 
      bAlternateSetting = 0x0000 
      bNumEndpoints = 0x0002 
      bInterfaceClass = 0x0008 
      bInterfaceSubClass = 0x0006 
      bInterfaceProtocol = 0x0050 
      iInterface = 0x0000  <no string>

     Endpoint 0
        bLength = 0x0007 
        bDescriptorType = 0x0005 
        bEndpointAddress = 0x0001  <OUT>
        bmAttributes = 0x0002  <BULK>
        wMaxPacketSize = 0x0200 
        bInterval = 0x0000 
        bRefresh = 0x0000 
        bSynchAddress = 0x0000 

     Endpoint 1
        bLength = 0x0007 
        bDescriptorType = 0x0005 
        bEndpointAddress = 0x0081  <IN>
        bmAttributes = 0x0002  <BULK>
        wMaxPacketSize = 0x0200 
        bInterval = 0x0000 
        bRefresh = 0x0000 
        bSynchAddress = 0x0000 

Regards,
Milan