On Thu, 25 Sep 2014 09:26:56 -0700, David Wolfskill wrote > On Thu, Sep 25, 2014 at 05:48:13PM +0200, José Pérez Arauzo wrote: > > Hi, > > on my Acer Aspire V5, AHCI does not complete device_attach after 271145. > > > > Am I the only one experiencing this? Can I help fixing it? Thank you. [...] > As for debugging, a start will be to collect the AHCI controller > information for "pciconf -lv", as well as dmesg information -- e.g.: Thank you David, here are pciconf and dmesg: ahci0_at_pci0:0:17:0: class=0x01018f card=0x080d1025 chip=0x78001022 rev=0x40 hdr=0x00 vendor = 'Advanced Micro Devices [AMD]' device = 'Hudson SATA Controller [IDE mode]' class = mass storage subclass = ATA > dmesg | fgrep -i ahci ahci0: <AMD Hudson-2 AHCI SATA controller> port 0x2118-0x211f,0x2124-0x2127,0x2110-0x2117,0x2120-0x2123,0x2100-0x210f mem 0xf094f000-0xf094f3ff irq 19 at device 17.0 on pci0 ahci0: AHCI v1.30 with 1 6Gbps ports, Port Multiplier supported with FBS ahcich0: <AHCI channel> at channel 0 on ahci0 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ahci0: <AMD Hudson-2 AHCI SATA controller> port 0x2118-0x211f,0x2124-0x2127,0x2110-0x2117,0x2120-0x2123,0x2100-0x210f mem 0xf094f000-0xf094f3ff irq 19 at device 17.0 on pci0 ahci0: AHCI v1.30 with 1 6Gbps ports, Port Multiplier supported with FBS ahcich0: <AHCI channel> at channel 0 on ahci0 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ahci0: <AMD Hudson-2 AHCI SATA controller> port 0x2118-0x211f,0x2124-0x2127,0x2110-0x2117,0x2120-0x2123,0x2100-0x210f mem 0xf094f000-0xf094f3ff irq 19 at device 17.0 on pci0 ahci0: AHCI v1.30 with 1 6Gbps ports, Port Multiplier supported with FBS ahcich0: <AHCI channel> at channel 0 on ahci0 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 For the sake of completeness: there's a BIOS option to either set the hw to present itself as legacy ISA or AHCI, but the kernel hangs in any case. BR, -- José Pérez ArauzoReceived on Thu Sep 25 2014 - 19:00:18 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:52 UTC