Re: problem with USB disks on ALPHA3 w/ recent AMD chipset

From: Hans Petter Selasky <hps_at_selasky.org>
Date: Sat, 18 Jun 2016 21:07:49 +0200
On 06/18/16 04:15, Johannes Dieterich wrote:
> Dear list,
>
> I observe the following when I try to write to any USB drive:
>
> Jun 17 22:02:35 manray kernel: (probe0:umass-sim0:0:0:0): INQUIRY.
> CDB: 12 00 00 00 24 00
> Jun 17 22:02:35 manray kernel: (probe0:umass-sim0:0:0:0): CAM status:
> CCB request completed with an error
> Jun 17 22:02:35 manray kernel: (probe0:umass-sim0:0:0:0): Retrying command
> Jun 17 22:02:36 manray kernel: da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
> Jun 17 22:02:36 manray kernel: da0: <SanDisk Cruzer Blade 1.00>
> Removable Direct Access SPC-4 SCSI device
> Jun 17 22:02:36 manray kernel: da0: Serial Number 4C530001090427108375
> Jun 17 22:02:36 manray kernel: da0: 40.000MB/s transfers
> Jun 17 22:02:36 manray kernel: da0: 15264MB (31260672 512 byte sectors)
> Jun 17 22:02:36 manray kernel: da0: quirks=0x2<NO_6_BYTE>
> Jun 17 22:04:21 manray kernel: (da0:umass-sim0:0:0:0): WRITE(10). CDB:
> 2a 00 00 00 00 00 00 00 80 00
> Jun 17 22:04:21 manray kernel: (da0:umass-sim0:0:0:0): CAM status: CCB
> request completed with an error
> Jun 17 22:04:21 manray kernel: (da0:umass-sim0:0:0:0): Retrying command
> Jun 17 22:04:27 manray kernel: (da0:umass-sim0:0:0:0): WRITE(10). CDB:
> 2a 00 00 00 00 00 00 00 80 00
> Jun 17 22:04:27 manray kernel: (da0:umass-sim0:0:0:0): CAM status: CCB
> request completed with an error
> Jun 17 22:04:27 manray kernel: (da0:umass-sim0:0:0:0): Retrying command
> Jun 17 22:04:32 manray kernel: (da0:umass-sim0:0:0:0): WRITE(10). CDB:
> 2a 00 00 00 00 00 00 00 80 00
> Jun 17 22:04:32 manray kernel: (da0:umass-sim0:0:0:0): CAM status: CCB
> request completed with an error
> Jun 17 22:04:32 manray kernel: (da0:umass-sim0:0:0:0): Retrying command
> Jun 17 22:04:38 manray kernel: (da0:umass-sim0:0:0:0): WRITE(10). CDB:
> 2a 00 00 00 00 00 00 00 80 00
> Jun 17 22:04:38 manray kernel: (da0:umass-sim0:0:0:0): CAM status: CCB
> request completed with an error
> Jun 17 22:04:38 manray kernel: (da0:umass-sim0:0:0:0): Retrying command
> Jun 17 22:04:43 manray kernel: (da0:umass-sim0:0:0:0): WRITE(10). CDB:
> 2a 00 00 00 00 00 00 00 80 00
> Jun 17 22:04:43 manray kernel: (da0:umass-sim0:0:0:0): CAM status: CCB
> request completed with an error
> Jun 17 22:04:43 manray kernel: (da0:umass-sim0:0:0:0): Error 5,
> Retries exhausted
> Jun 17 22:05:11 manray kernel: (da0:umass-sim0:0:0:0): got CAM status 0x44
> Jun 17 22:05:11 manray kernel: (da0:umass-sim0:0:0:0): fatal error,
> failed to attach to device
> Jun 17 22:05:11 manray kernel: da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
> Jun 17 22:05:11 manray kernel: da0: <SanDisk Cruzer Blade 1.00> s/n
> 4C530001090427108375 detached
> Jun 17 22:05:17 manray kernel: (da0:umass-sim0:0:0:0): Periph destroyed
>
> I.e., when I dd, the dd exists prematurely with an error.
>
> pciconf:
>
> hostb0_at_pci0:0:0:0: class=0x060000 card=0x15761022 chip=0x15761022
> rev=0x00 hdr=0x00
> vendor = 'Advanced Micro Devices, Inc. [AMD]'
> class = bridge
> subclass = HOST-PCI
> none0_at_pci0:0:0:2: class=0x080600 card=0x15771022 chip=0x15771022
> rev=0x00 hdr=0x00
> vendor = 'Advanced Micro Devices, Inc. [AMD]'
> class = base peripheral
> subclass = IOMMU
> vgapci0_at_pci0:0:1:0: class=0x030000 card=0x807e103c chip=0x98741002
> rev=0xc4 hdr=0x00
> vendor = 'Advanced Micro Devices, Inc. [AMD/ATI]'
> device = 'Carrizo'
> class = display
> subclass = VGA
> hdac0_at_pci0:0:1:1: class=0x040300 card=0x807e103c chip=0x98401002
> rev=0x00 hdr=0x00
> vendor = 'Advanced Micro Devices, Inc. [AMD/ATI]'
> device = 'Kabini HDMI/DP Audio'
> class = multimedia
> subclass = HDA
> hostb1_at_pci0:0:2:0: class=0x060000 card=0x00000000 chip=0x157b1022
> rev=0x00 hdr=0x00
> vendor = 'Advanced Micro Devices, Inc. [AMD]'
> class = bridge
> subclass = HOST-PCI
> pcib1_at_pci0:0:2:1: class=0x060400 card=0x12341022 chip=0x157c1022
> rev=0x00 hdr=0x01
> vendor = 'Advanced Micro Devices, Inc. [AMD]'
> class = bridge
> subclass = PCI-PCI
> pcib2_at_pci0:0:2:3: class=0x060400 card=0x12341022 chip=0x157c1022
> rev=0x00 hdr=0x01
> vendor = 'Advanced Micro Devices, Inc. [AMD]'
> class = bridge
> subclass = PCI-PCI
> pcib3_at_pci0:0:2:5: class=0x060400 card=0x12341022 chip=0x157c1022
> rev=0x00 hdr=0x01
> vendor = 'Advanced Micro Devices, Inc. [AMD]'
> class = bridge
> subclass = PCI-PCI
> hostb2_at_pci0:0:3:0: class=0x060000 card=0x00000000 chip=0x157b1022
> rev=0x00 hdr=0x00
> vendor = 'Advanced Micro Devices, Inc. [AMD]'
> class = bridge
> subclass = HOST-PCI
> none1_at_pci0:0:8:0: class=0x108000 card=0x15781022 chip=0x15781022
> rev=0x00 hdr=0x00
> vendor = 'Advanced Micro Devices, Inc. [AMD]'
> class = encrypt/decrypt
> hostb3_at_pci0:0:9:0: class=0x060000 card=0x00000000 chip=0x157d1022
> rev=0x00 hdr=0x00
> vendor = 'Advanced Micro Devices, Inc. [AMD]'
> class = bridge
> subclass = HOST-PCI
> hdac1_at_pci0:0:9:2: class=0x040300 card=0x807e103c chip=0x157a1022
> rev=0x00 hdr=0x00
> vendor = 'Advanced Micro Devices, Inc. [AMD]'
> class = multimedia
> subclass = HDA
> xhci0_at_pci0:0:16:0: class=0x0c0330 card=0x807e103c chip=0x79141022
> rev=0x20 hdr=0x00
> vendor = 'Advanced Micro Devices, Inc. [AMD]'
> device = 'FCH USB XHCI Controller'
> class = serial bus
> subclass = USB
> ahci0_at_pci0:0:17:0: class=0x010601 card=0x807e103c chip=0x79011022
> rev=0x49 hdr=0x00
> vendor = 'Advanced Micro Devices, Inc. [AMD]'
> device = 'FCH SATA Controller [AHCI mode]'
> class = mass storage
> subclass = SATA
> ehci0_at_pci0:0:18:0: class=0x0c0320 card=0x807e103c chip=0x79081022
> rev=0x49 hdr=0x00
> vendor = 'Advanced Micro Devices, Inc. [AMD]'
> device = 'FCH USB EHCI Controller'
> class = serial bus
> subclass = USB
> none2_at_pci0:0:20:0: class=0x0c0500 card=0x807e103c chip=0x790b1022
> rev=0x4a hdr=0x00
> vendor = 'Advanced Micro Devices, Inc. [AMD]'
> device = 'FCH SMBus Controller'
> class = serial bus
> subclass = SMBus
> isab0_at_pci0:0:20:3: class=0x060100 card=0x807e103c chip=0x790e1022
> rev=0x11 hdr=0x00
> vendor = 'Advanced Micro Devices, Inc. [AMD]'
> device = 'FCH LPC Bridge'
> class = bridge
> subclass = PCI-ISA
> hostb4_at_pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x15701022
> rev=0x00 hdr=0x00
> vendor = 'Advanced Micro Devices, Inc. [AMD]'
> class = bridge
> subclass = HOST-PCI
> hostb5_at_pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x15711022
> rev=0x00 hdr=0x00
> vendor = 'Advanced Micro Devices, Inc. [AMD]'
> class = bridge
> subclass = HOST-PCI
> hostb6_at_pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x15721022
> rev=0x00 hdr=0x00
> vendor = 'Advanced Micro Devices, Inc. [AMD]'
> class = bridge
> subclass = HOST-PCI
> hostb7_at_pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x15731022
> rev=0x00 hdr=0x00
> vendor = 'Advanced Micro Devices, Inc. [AMD]'
> class = bridge
> subclass = HOST-PCI
> hostb8_at_pci0:0:24:4: class=0x060000 card=0x00000000 chip=0x15741022
> rev=0x00 hdr=0x00
> vendor = 'Advanced Micro Devices, Inc. [AMD]'
> class = bridge
> subclass = HOST-PCI
> hostb9_at_pci0:0:24:5: class=0x060000 card=0x00000000 chip=0x15751022
> rev=0x00 hdr=0x00
> vendor = 'Advanced Micro Devices, Inc. [AMD]'
> class = bridge
> subclass = HOST-PCI
> bge0_at_pci0:1:0:0: class=0x020000 card=0x807e103c chip=0x168714e4
> rev=0x10 hdr=0x00
> vendor = 'Broadcom Corporation'
> device = 'NetXtreme BCM5762 Gigabit Ethernet PCIe'
> class = network
> subclass = ethernet
> iwm0_at_pci0:2:0:0: class=0x028000 card=0x50108086 chip=0x095a8086
> rev=0x61 hdr=0x00
> vendor = 'Intel Corporation'
> device = 'Wireless 7265'
> class = network
> none3_at_pci0:3:0:0: class=0xff0000 card=0x807e103c chip=0x522a10ec
> rev=0x01 hdr=0x00
> vendor = 'Realtek Semiconductor Co., Ltd.'
> device = 'RTS522A PCI Express Card Reader'
>
> This is on a recent CURRENT: r301970
>
> All ideas most welcome!

Did you try enabling some of the UQ_MSC_XXX quirks as given by 
"usbconfig dump_quirk_names"?

--HPS
Received on Sat Jun 18 2016 - 17:04:16 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:41:06 UTC