Mon, 03 Oct 2016 03:55:23 +0300 було написано Kevin Lo <kevlo_at_freebsd.org>: Hi! Can you refresh the tree and retest it (dev.rtwn.0.debug=0x829f) ? P.S. If Rx is still broken (status is always 0) try to execute 'ifconfig wlan0 promisc' > On Sun, Oct 02, 2016 at 10:15:49AM -0700, Adrian Chadd wrote: >> >> hi, > > Hi Adrian, > >> can you turn on debugging? Do you see RX frames? > > No Rx frames. The log is pretty much the same one I sent on the list: > https://lists.freebsd.org/pipermail/freebsd-wireless/2016-September/007093.html > >> -a > > Thanks, > Kevin > >> On 1 October 2016 at 08:09, Kevin Lo <kevlo_at_freebsd.org> wrote: >> > Strange, rtwn(4) stops working. I tried to scan for the available >> network, >> > but it just returns empty results. >> > >> > On Fri, Sep 23, 2016 at 02:44:13PM +0300, Andriy Voskoboinyk wrote: >> >> >> >> Fri, 23 Sep 2016 10:18:30 +0300 було написано Kevin Lo >> <kevlo_at_freebsd.org>: >> >> >> >> Few more questions: >> >> 1) does it work with h/w encryption support? (enabled by default) >> >> (if 'yes' - I will remove 'hardware crypto enabled' warning). >> >> 2) is there rate control support? (wlandebug -i wlan0 rate ; then >> transmit >> >> something - if it works then AMRR will print it's current status >> >> periodically) >> >> 3) can you test some disabled capabilities? (ad-hoc/AP modes, 11n) >> >> (see r92ce_adj_devcaps() in >> sys/dev/rtwn/rtl8192c/pci/r92ce_attach.c). >> >> >> >> > It works for me, thanks :) >> >> > >> >> > Kevin >> >> > >> >> > On Fri, Sep 23, 2016 at 09:08:15AM +0300, Andriy Voskoboinyk wrote: >> >> >> >> >> >> Fri, 23 Sep 2016 04:58:40 +0300 було написано Kevin Lo >> >> >> <kevlo_at_freebsd.org>: >> >> >> >> >> >> Thanks for the log file, >> >> >> >> >> >> Tx 'device timeouts' should be fixed in >> >> >> >> https://github.com/s3erios/rtwn/commit/f78d51b6ed8590e3aeb65fbf616aa767034a89f5 >> >> >> (currently I'm reviewing PCI-specific code to see if there are any >> >> >> additional >> >> >> issues - e.g., there are no Rx events in the log file). >> >> >> >> >> >> > On Thu, Sep 22, 2016 at 01:54:21PM +0300, Andriy Voskoboinyk >> wrote: >> >> >> >> >> >> >> >> Thu, 22 Sep 2016 12:24:42 +0300 було написано Kevin Lo >> >> >> >> <kevlo_at_freebsd.org>: >> >> >> >> >> >> >> >> Hi, >> >> >> >> >> >> >> >> So, the driver was fully tested. Thanks! >> >> >> >> Can you set dev.rtwn.0.debug=0x829f for RTL8188CE to see how >> big >> >> >> >> the problem is? >> >> >> > >> >> >> > Sure. Here you go >> >> >> https://people.freebsd.org/~kevlo/rtl8188ce-debug.txt >> >> >> > >> >> >> > Thanks, >> >> >> > Kevin >> >> >> > >> >> >> >> > Hi Andriy, >> >> >> >> > >> >> >> >> > First of all, THANK YOU! You're doing amazing work! >> >> >> >> > Second, I've done some testing on the following devices, >> >> >> downloading >> >> >> >> > FreeBSD-12.0-CURRENT-amd64-20160809-r303880-disc1.iso from >> >> >> >> > ftp.freebsd.org: >> >> >> >> > >> >> >> >> > - ASUS USB-N10 NANO (RTL8188CUS): >> >> >> >> > rtwn0: <vendor 0x0b05 product 0x17ba, class 0/0, rev >> 2.00/2.00, >> >> >> addr >> >> >> >> > 3> on usbus0 >> >> >> >> > rtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R >> >> >> >> > >> >> >> >> > - TP-Link TL-WN725N v2 (RTL8188EU): >> >> >> >> > rtwn0: <Realtek 802.11n NIC, class 0/0, rev 2.00/0.00, >> addr 4> on >> >> >> >> > usbus0 >> >> >> >> > rtwn0: MAC/BB RTL8188EU, RF 6052 1T1R >> >> >> >> > >> >> >> >> > - D-Link DWA-131 (RTL8192CU): >> >> >> >> > rtwn0: <vendor 0x2001 product 0x330d, class 0/0, rev >> 2.00/2.00, >> >> >> addr >> >> >> >> > 3> on usbus0 >> >> >> >> > rtwn0: MAC/BB RTL8192CU, RF 6052 2T2R >> >> >> >> > >> >> >> >> > - TP-Link Archer T4U (RTL8812AU): >> >> >> >> > rtwn0: <Realtek 802.11n NIC, class 0/0, rev 2.00/0.00, >> addr 7> on >> >> >> >> > usbus0 >> >> >> >> > rtwn0: MAC/BB RTL8812AU, RF 6052 2T2R >> >> >> >> > >> >> >> >> > - D-Link DWA-171 rev A1 (RTL8821AU): >> >> >> >> > rtwn0: <802.11n WLAN Adapter> on usbus0 >> >> >> >> > rtwn0: MAC/BB RTL8821AU, RF 6052 1T1R >> >> >> >> > >> >> >> >> > - RTL8188CE mini pcie: >> >> >> >> > rtwn0: <Realtek RTL8188CE> port 0xd000-0xd0ff mem >> >> >> >> > 0x90800000-0x90803fff irq 17 at device 0.0 on pci1 >> >> >> >> > rtwn0: r92ce_attach: warning: hardware crypto enabled >> >> >> >> > rtwn0: MAC/BB RTL8188CE, RF 6052 1T1R >> >> >> >> > >> >> >> >> > All seems to be ok, except RTL8188CE PCIe adapter doesn't >> work: >> >> >> >> > >> >> >> >> > rtwn0: r92ce_post_init: warning: net80211 ratectl is used >> >> >> >> > rtwn0: device timeout >> >> >> >> > >> >> >> >> > Kevin >> >> >> >> > >> >> >> >> > On Mon, Sep 19, 2016 at 04:26:38PM +0300, Andriy Voskoboinyk >> wrote: >> >> >> >> >> >> >> >> >> >> Thu, 01 Sep 2016 19:29:03 +0300 було написано Andriy >> Voskoboinyk >> >> >> >> >> <avos_at_freebsd.org>: >> >> >> >> >> >> >> >> >> >> Now it resides on https://github.com/s3erios/freebsd-rtwn >> >> >> (integrated >> >> >> >> >> into src tree, so it can be built with 'make buildkernel' / >> 'make >> >> >> >> >> buildworld'). >> >> >> >> >> >> >> >> >> >> This the last stage; once all reported issues will be >> resolved, >> >> >> I'm >> >> >> >> >> going to merge it into HEAD. >> >> >> >> >> >> >> >> >> >> > Hi everyone, >> >> >> >> >> > >> >> >> >> >> > rtwn(4), urtwn(4) and urtwm (from previous emails) >> drivers were >> >> >> >> merged >> >> >> >> >> > into a >> >> >> >> >> > single rtwn driver (plus rtwn_usb / rtwn_pci device >> glue); the >> >> >> >> code is >> >> >> >> >> > available on https://github.com/s3erios/rtwn repository. >> Among >> >> >> >> >> bugfixes / >> >> >> >> >> > code deduplication, there some new features too: >> >> >> >> >> > >> >> >> >> >> > 1) multi-vap support (one any wireless interface + one STA >> >> >> >> interface + >> >> >> >> >> > any number of monitor mode interfaces). >> >> >> >> >> > 2) few new sysctls: >> >> >> >> >> > * dev.rtwn.#.crypto - controls how to use hardware >> crypto >> >> >> >> >> acceleration >> >> >> >> >> > * dev.rtwn.#.ratectl_selected >> >> >> >> >> > * dev.rtwn.#.ratectl - selects current 'rate control' >> >> >> algorithm >> >> >> >> >> > (currently only 'none' and 'net80211' are supported; >> RTL8192CE >> >> >> >> needs >> >> >> >> >> > testing >> >> >> >> >> > with the last). >> >> >> >> >> > 3) (incomplete) power management support for RTL8188EU >> (requires >> >> >> >> >> > firmware). >> >> >> >> >> > 4) Short Guard Interval support. >> >> >> >> >> > >> >> >> >> >> > It's known to work with RTL8188CUS, RTL8188EU and >> RTL8821AU; >> >> >> >> however, >> >> >> >> >> > it was never tested with RTL8192CE or RTL8812AU. >> >> >> >> >> > >> >> >> >> >> > How-to-build: >> >> >> >> >> > 1) download / checkout the repository. >> >> >> >> >> > 2) apply 'patch-usbdevs.diff' against '/usr/src' >> >> >> >> >> > 3) build and install rtwn module: >> >> >> >> >> > cd $repository/sys/modules/rtwn && make && make >> install >> >> >> >> >> > 4) build and install rtwn_usb/rtwn_pci: >> >> >> >> >> > cd ../rtwn_usb && make && make install >> >> >> >> >> > cd ../rtwn_pci && make && make install >> >> >> >> >> > 5) unload previous && load current drivers: >> >> >> >> >> > kldunload if_urtwn if_rtwn >> >> >> >> >> > kldload /boot/modules/if_rtwn.ko >> >> >> /boot/modules/if_rtwn_usb.ko >> >> >> >> >> > /boot/modules/if_rtwn_pci.ko >> >> >> >> >> > 6) Use. >> >> >> >> >> _______________________________________________ >> >> >> >> >> freebsd-wireless_at_freebsd.org mailing list >> >> >> >> >> https://lists.freebsd.org/mailman/listinfo/freebsd-wireless >> >> >> >> >> To unsubscribe, send any mail to >> >> >> >> >> "freebsd-wireless-unsubscribe_at_freebsd.org" >> >> >> >> >> >> >> >> >> >> >> >> _______________________________________________ >> >> >> freebsd-current_at_freebsd.org mailing list >> >> >> https://lists.freebsd.org/mailman/listinfo/freebsd-current >> >> >> To unsubscribe, send any mail to >> >> >> "freebsd-current-unsubscribe_at_freebsd.org" >> >> >> >> >> >> >> >> > _______________________________________________ >> >> > freebsd-wireless_at_freebsd.org mailing list >> >> > https://lists.freebsd.org/mailman/listinfo/freebsd-wireless >> >> > To unsubscribe, send any mail to >> >> > "freebsd-wireless-unsubscribe_at_freebsd.org" >> >> >> >> >> > _______________________________________________ >> > freebsd-current_at_freebsd.org mailing list >> > https://lists.freebsd.org/mailman/listinfo/freebsd-current >> > To unsubscribe, send any mail to >> "freebsd-current-unsubscribe_at_freebsd.org" >> >> > _______________________________________________ > freebsd-wireless_at_freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-wireless > To unsubscribe, send any mail to > "freebsd-wireless-unsubscribe_at_freebsd.org"Received on Fri Oct 07 2016 - 21:25:31 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:41:08 UTC