On Sat, Oct 08, 2016 at 02:18:54AM +0300, Andriy Voskoboinyk wrote: > > Mon, 03 Oct 2016 03:55:23 +0300 було написано Kevin Lo <kevlo_at_freebsd.org>: > > Hi! Hi Andriy, > Can you refresh the tree and retest it (dev.rtwn.0.debug=0x829f) ? I refreshed the tree and retested it, unfortunately it's still the same. Here's the log: https://people.freebsd.org/~kevlo/rtl8188ce-debuglog > > P.S. If Rx is still broken (status is always 0) try to execute > 'ifconfig wlan0 promisc' It doesn't help either :( > > On Sun, Oct 02, 2016 at 10:15:49AM -0700, Adrian Chadd wrote: > >> > >> hi, > > > > Hi Adrian, > > > >> can you turn on debugging? Do you see RX frames? > > > > No Rx frames. The log is pretty much the same one I sent on the list: > > https://lists.freebsd.org/pipermail/freebsd-wireless/2016-September/007093.html > > > >> -a > > > > Thanks, > > Kevin > > > >> On 1 October 2016 at 08:09, Kevin Lo <kevlo_at_freebsd.org> wrote: > >> > Strange, rtwn(4) stops working. I tried to scan for the available > >> network, > >> > but it just returns empty results. > >> > > >> > On Fri, Sep 23, 2016 at 02:44:13PM +0300, Andriy Voskoboinyk wrote: > >> >> > >> >> Fri, 23 Sep 2016 10:18:30 +0300 було написано Kevin Lo > >> <kevlo_at_freebsd.org>: > >> >> > >> >> Few more questions: > >> >> 1) does it work with h/w encryption support? (enabled by default) > >> >> (if 'yes' - I will remove 'hardware crypto enabled' warning). > >> >> 2) is there rate control support? (wlandebug -i wlan0 rate ; then > >> transmit > >> >> something - if it works then AMRR will print it's current status > >> >> periodically) > >> >> 3) can you test some disabled capabilities? (ad-hoc/AP modes, 11n) > >> >> (see r92ce_adj_devcaps() in > >> sys/dev/rtwn/rtl8192c/pci/r92ce_attach.c). > >> >> > >> >> > It works for me, thanks :) > >> >> > > >> >> > Kevin > >> >> > > >> >> > On Fri, Sep 23, 2016 at 09:08:15AM +0300, Andriy Voskoboinyk wrote: > >> >> >> > >> >> >> Fri, 23 Sep 2016 04:58:40 +0300 було написано Kevin Lo > >> >> >> <kevlo_at_freebsd.org>: > >> >> >> > >> >> >> Thanks for the log file, > >> >> >> > >> >> >> Tx 'device timeouts' should be fixed in > >> >> >> > >> https://github.com/s3erios/rtwn/commit/f78d51b6ed8590e3aeb65fbf616aa767034a89f5 > >> >> >> (currently I'm reviewing PCI-specific code to see if there are any > >> >> >> additional > >> >> >> issues - e.g., there are no Rx events in the log file). > >> >> >> > >> >> >> > On Thu, Sep 22, 2016 at 01:54:21PM +0300, Andriy Voskoboinyk > >> wrote: > >> >> >> >> > >> >> >> >> Thu, 22 Sep 2016 12:24:42 +0300 було написано Kevin Lo > >> >> >> >> <kevlo_at_freebsd.org>: > >> >> >> >> > >> >> >> >> Hi, > >> >> >> >> > >> >> >> >> So, the driver was fully tested. Thanks! > >> >> >> >> Can you set dev.rtwn.0.debug=0x829f for RTL8188CE to see how > >> big > >> >> >> >> the problem is? > >> >> >> > > >> >> >> > Sure. Here you go > >> >> >> https://people.freebsd.org/~kevlo/rtl8188ce-debug.txt > >> >> >> > > >> >> >> > Thanks, > >> >> >> > Kevin > >> >> >> > > >> >> >> >> > Hi Andriy, > >> >> >> >> > > >> >> >> >> > First of all, THANK YOU! You're doing amazing work! > >> >> >> >> > Second, I've done some testing on the following devices, > >> >> >> downloading > >> >> >> >> > FreeBSD-12.0-CURRENT-amd64-20160809-r303880-disc1.iso from > >> >> >> >> > ftp.freebsd.org: > >> >> >> >> > > >> >> >> >> > - ASUS USB-N10 NANO (RTL8188CUS): > >> >> >> >> > rtwn0: <vendor 0x0b05 product 0x17ba, class 0/0, rev > >> 2.00/2.00, > >> >> >> addr > >> >> >> >> > 3> on usbus0 > >> >> >> >> > rtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R > >> >> >> >> > > >> >> >> >> > - TP-Link TL-WN725N v2 (RTL8188EU): > >> >> >> >> > rtwn0: <Realtek 802.11n NIC, class 0/0, rev 2.00/0.00, > >> addr 4> on > >> >> >> >> > usbus0 > >> >> >> >> > rtwn0: MAC/BB RTL8188EU, RF 6052 1T1R > >> >> >> >> > > >> >> >> >> > - D-Link DWA-131 (RTL8192CU): > >> >> >> >> > rtwn0: <vendor 0x2001 product 0x330d, class 0/0, rev > >> 2.00/2.00, > >> >> >> addr > >> >> >> >> > 3> on usbus0 > >> >> >> >> > rtwn0: MAC/BB RTL8192CU, RF 6052 2T2R > >> >> >> >> > > >> >> >> >> > - TP-Link Archer T4U (RTL8812AU): > >> >> >> >> > rtwn0: <Realtek 802.11n NIC, class 0/0, rev 2.00/0.00, > >> addr 7> on > >> >> >> >> > usbus0 > >> >> >> >> > rtwn0: MAC/BB RTL8812AU, RF 6052 2T2R > >> >> >> >> > > >> >> >> >> > - D-Link DWA-171 rev A1 (RTL8821AU): > >> >> >> >> > rtwn0: <802.11n WLAN Adapter> on usbus0 > >> >> >> >> > rtwn0: MAC/BB RTL8821AU, RF 6052 1T1R > >> >> >> >> > > >> >> >> >> > - RTL8188CE mini pcie: > >> >> >> >> > rtwn0: <Realtek RTL8188CE> port 0xd000-0xd0ff mem > >> >> >> >> > 0x90800000-0x90803fff irq 17 at device 0.0 on pci1 > >> >> >> >> > rtwn0: r92ce_attach: warning: hardware crypto enabled > >> >> >> >> > rtwn0: MAC/BB RTL8188CE, RF 6052 1T1R > >> >> >> >> > > >> >> >> >> > All seems to be ok, except RTL8188CE PCIe adapter doesn't > >> work: > >> >> >> >> > > >> >> >> >> > rtwn0: r92ce_post_init: warning: net80211 ratectl is used > >> >> >> >> > rtwn0: device timeout > >> >> >> >> > > >> >> >> >> > Kevin > >> >> >> >> > > >> >> >> >> > On Mon, Sep 19, 2016 at 04:26:38PM +0300, Andriy Voskoboinyk > >> wrote: > >> >> >> >> >> > >> >> >> >> >> Thu, 01 Sep 2016 19:29:03 +0300 було написано Andriy > >> Voskoboinyk > >> >> >> >> >> <avos_at_freebsd.org>: > >> >> >> >> >> > >> >> >> >> >> Now it resides on https://github.com/s3erios/freebsd-rtwn > >> >> >> (integrated > >> >> >> >> >> into src tree, so it can be built with 'make buildkernel' / > >> 'make > >> >> >> >> >> buildworld'). > >> >> >> >> >> > >> >> >> >> >> This the last stage; once all reported issues will be > >> resolved, > >> >> >> I'm > >> >> >> >> >> going to merge it into HEAD. > >> >> >> >> >> > >> >> >> >> >> > Hi everyone, > >> >> >> >> >> > > >> >> >> >> >> > rtwn(4), urtwn(4) and urtwm (from previous emails) > >> drivers were > >> >> >> >> merged > >> >> >> >> >> > into a > >> >> >> >> >> > single rtwn driver (plus rtwn_usb / rtwn_pci device > >> glue); the > >> >> >> >> code is > >> >> >> >> >> > available on https://github.com/s3erios/rtwn repository. > >> Among > >> >> >> >> >> bugfixes / > >> >> >> >> >> > code deduplication, there some new features too: > >> >> >> >> >> > > >> >> >> >> >> > 1) multi-vap support (one any wireless interface + one STA > >> >> >> >> interface + > >> >> >> >> >> > any number of monitor mode interfaces). > >> >> >> >> >> > 2) few new sysctls: > >> >> >> >> >> > * dev.rtwn.#.crypto - controls how to use hardware > >> crypto > >> >> >> >> >> acceleration > >> >> >> >> >> > * dev.rtwn.#.ratectl_selected > >> >> >> >> >> > * dev.rtwn.#.ratectl - selects current 'rate control' > >> >> >> algorithm > >> >> >> >> >> > (currently only 'none' and 'net80211' are supported; > >> RTL8192CE > >> >> >> >> needs > >> >> >> >> >> > testing > >> >> >> >> >> > with the last). > >> >> >> >> >> > 3) (incomplete) power management support for RTL8188EU > >> (requires > >> >> >> >> >> > firmware). > >> >> >> >> >> > 4) Short Guard Interval support. > >> >> >> >> >> > > >> >> >> >> >> > It's known to work with RTL8188CUS, RTL8188EU and > >> RTL8821AU; > >> >> >> >> however, > >> >> >> >> >> > it was never tested with RTL8192CE or RTL8812AU. > >> >> >> >> >> > > >> >> >> >> >> > How-to-build: > >> >> >> >> >> > 1) download / checkout the repository. > >> >> >> >> >> > 2) apply 'patch-usbdevs.diff' against '/usr/src' > >> >> >> >> >> > 3) build and install rtwn module: > >> >> >> >> >> > cd $repository/sys/modules/rtwn && make && make > >> install > >> >> >> >> >> > 4) build and install rtwn_usb/rtwn_pci: > >> >> >> >> >> > cd ../rtwn_usb && make && make install > >> >> >> >> >> > cd ../rtwn_pci && make && make install > >> >> >> >> >> > 5) unload previous && load current drivers: > >> >> >> >> >> > kldunload if_urtwn if_rtwn > >> >> >> >> >> > kldload /boot/modules/if_rtwn.ko > >> >> >> /boot/modules/if_rtwn_usb.ko > >> >> >> >> >> > /boot/modules/if_rtwn_pci.ko > >> >> >> >> >> > 6) Use. > >> >> >> >> >> _______________________________________________ > >> >> >> >> >> freebsd-wireless_at_freebsd.org mailing list > >> >> >> >> >> https://lists.freebsd.org/mailman/listinfo/freebsd-wireless > >> >> >> >> >> To unsubscribe, send any mail to > >> >> >> >> >> "freebsd-wireless-unsubscribe_at_freebsd.org" > >> >> >> >> >> > >> >> >> >> > >> >> >> _______________________________________________ > >> >> >> freebsd-current_at_freebsd.org mailing list > >> >> >> https://lists.freebsd.org/mailman/listinfo/freebsd-current > >> >> >> To unsubscribe, send any mail to > >> >> >> "freebsd-current-unsubscribe_at_freebsd.org" > >> >> >> > >> >> >> > >> >> > _______________________________________________ > >> >> > freebsd-wireless_at_freebsd.org mailing list > >> >> > https://lists.freebsd.org/mailman/listinfo/freebsd-wireless > >> >> > To unsubscribe, send any mail to > >> >> > "freebsd-wireless-unsubscribe_at_freebsd.org" > >> >> > >> >> > >> > _______________________________________________ > >> > freebsd-current_at_freebsd.org mailing list > >> > https://lists.freebsd.org/mailman/listinfo/freebsd-current > >> > To unsubscribe, send any mail to > >> "freebsd-current-unsubscribe_at_freebsd.org" > >> > >> > > _______________________________________________ > > freebsd-wireless_at_freebsd.org mailing list > > https://lists.freebsd.org/mailman/listinfo/freebsd-wireless > > To unsubscribe, send any mail to > > "freebsd-wireless-unsubscribe_at_freebsd.org" > >Received on Mon Oct 10 2016 - 23:28:13 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:41:08 UTC