Hi I have FreeBSD-current on a Lenovo T510 laptop. Since a few weeks I observe the following error messages during boot: usb_alloc_device: set address 2 failed (USB_ERR_TIMEOUT, ignored) uhub2: 8 ports with 8 removable, self powered usb_alloc_device: set address 3 failed (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_IOERROR usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT sdhci_pci0-slot0: Controller timeout sdhci_pci0-slot0: ============== REGISTER DUMP ============== sdhci_pci0-slot0: Sys addr: 0x00000000 | Version: 0x00000400 sdhci_pci0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000 sdhci_pci0-slot0: Present: 0x01ff0000 | Host ctl: 0x00000001 sdhci_pci0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00004007 sdhci_pci0-slot0: Timeout: 0x0000000e | Int stat: 0x00000001 sdhci_pci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb sdhci_pci0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000001 sdhci_pci0-slot0: Caps: 0x01e032b2 | Max curr: 0x00000040 sdhci_pci0-slot0: =========================================== usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_IOERROR The error slows down the boot process, otherwise I did not observe other problems. The same laptop did not show similar error messages with FreeBSD-11, nor with any earlier version. I attached the dmesg output, kernel configuration and pciconf -lv output. Did anybody experience similar things? best regards Üdvözlettel: Krasznai András rendszermérnök M&S Informatikai Zrt. 1136 Budapest, Pannónia u. 11. Tel: +36 (1) 703-2923 Fax: +36 (1) 703-2949 Mobil: +36 (30) 703-2923 E-mail: krasznai.andras_at_mands.hu<mailto:krasznai.andras_at_mands.hu>
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:41:09 UTC