> On Nov 13, 2018, at 4:02 PM, Stefan Ehmann <shoesoft_at_gmx.net> wrote: > >> On 11/13/18 8:59 PM, Daniel Eischen wrote: >>> On Tue, 13 Nov 2018, Greg V wrote: >>> >>> >>> >>> On Tue, Nov 13, 2018 at 8:59 PM, Daniel Eischen <deischen_at_freebsd.org> >>> wrote: >>>> Greetings, >>>> >>>> I'm trying to track down a couple of things. amdtemp doesn't >>>> report any temperature sensors, and acpi seems to have some >>>> errors. Not sure if they are related. >>>> >>>> These are the ACPI-related warnings and errors during boot. >>>> >>>> Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has >>>> valid Length but zero Address: 0x0000000000000000/0x1 >>>> (20181031/tbfadt-796) >>> >>> I see this one on my R7 1700 / X370 system, seems harmless. > > I also see this warning on the X470-pro with Ryzen 7 2700 on 12.0-BETA. > But I don't get the Firmware errors below. What BIOS version are you using? I'm running 13-current built from just a few days ago. Never had any temp sysctls since initial install (beginning of October). >>>> acpi0: <ALASKA A M I > on motherboard >>>> Firmware Error (ACPI): Failure creating [\134_SB.SMIC], >>>> AE_ALREADY_EXISTS (20181031/dswload2-477) >>>> ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog >>>> (20181031/psobject-372) >>>> Firmware Error (ACPI): Failure creating [\134_SB.SMIB], >>>> AE_ALREADY_EXISTS (20181031/dsfield-803) >>> >>> Looks like people see these on Linux: >>> >>> https://forum.manjaro.org/t/unstable-behaviour-not-always-completely-booting/55823/5 >>> >>> >>> Are you on the latest firmware ("BIOS") revision for your board? >> >> Yes, it's an ASUS Prime X-470 PRO, and I'm running with the latest >> BIOS from 2018 September 21, version 4024. >> >> https://www.asus.com/us/Motherboards/PRIME-X470-PRO/HelpDesk_BIOS/ >> > > After kldload amdtemp I see the following sysctls: > dev.cpu.0.temperature: 77.1C > dev.amdtemp.0.core0.sensor0: 77.1C > > The temperature I see in BIOS is much lower (maybe around 40.0C). Don't > know if just the offset is wrong or the numbers are completely bogus. > > Numbers from sysutils/xmbmon look saner but not sure if they are correct. Yeah, I don't have any sensors detected, but my BIOS reports around 39C, right around the same as yours. There are both motherboard and CPU temps in BIOS, reporting just a couple of degrees difference. Overall, this system is very stable, haven't had any crashes or hangs. -- DEReceived on Tue Nov 13 2018 - 20:40:48 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:41:19 UTC