On 2020-Jul-26, at 18:20, John-Mark Gurney <jmg_at_funkthat.com> wrote: > Mark Millard wrote this message on Sat, Jul 25, 2020 at 19:13 -0700: >> For reference for what applying the patch >> reported (see Hunk #14): > > Ok, updated it to be relative to r363583... > > I had made a white spcae commit to if_ure.c, but hadn't made the > patch relative to it after that commit.. should work now.. That worked after I upgraded to -r363590 as what to start from ( upgraded from -r363510 ). Only a quick, basic test on a cortexA72 aarch64 system with a USB3 EtherNet device so far: # iperf3 -c 192.168.1.120 --get-server-output Connecting to host 192.168.1.120, port 5201 [ 5] local 192.168.1.148 port 63238 connected to 192.168.1.120 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 91.8 MBytes 770 Mbits/sec 821 91.3 KBytes [ 5] 1.00-2.00 sec 92.2 MBytes 774 Mbits/sec 865 51.1 KBytes [ 5] 2.00-3.00 sec 92.2 MBytes 773 Mbits/sec 844 29.9 KBytes [ 5] 3.00-4.00 sec 91.3 MBytes 766 Mbits/sec 826 65.4 KBytes [ 5] 4.00-5.00 sec 91.2 MBytes 765 Mbits/sec 828 44.1 KBytes [ 5] 5.00-6.00 sec 91.6 MBytes 768 Mbits/sec 862 4.28 KBytes [ 5] 6.00-7.00 sec 91.1 MBytes 765 Mbits/sec 842 5.70 KBytes [ 5] 7.00-8.00 sec 91.5 MBytes 767 Mbits/sec 844 78.1 KBytes [ 5] 8.00-9.00 sec 92.1 MBytes 772 Mbits/sec 855 58.3 KBytes [ 5] 9.00-10.00 sec 91.6 MBytes 769 Mbits/sec 844 17.1 KBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 917 MBytes 769 Mbits/sec 8431 sender [ 5] 0.00-10.19 sec 916 MBytes 755 Mbits/sec receiver Server output: ----------------------------------------------------------- Server listening on 5201 ----------------------------------------------------------- Accepted connection from 192.168.1.148, port 32073 [ 5] local 192.168.1.120 port 5201 connected to 192.168.1.148 port 63238 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 74.2 MBytes 622 Mbits/sec [ 5] 1.00-2.00 sec 92.3 MBytes 774 Mbits/sec [ 5] 2.00-3.00 sec 92.3 MBytes 774 Mbits/sec [ 5] 3.00-4.00 sec 91.4 MBytes 767 Mbits/sec [ 5] 4.00-5.00 sec 91.1 MBytes 764 Mbits/sec [ 5] 5.00-6.00 sec 91.7 MBytes 769 Mbits/sec [ 5] 6.00-7.00 sec 91.2 MBytes 765 Mbits/sec [ 5] 7.00-8.00 sec 91.2 MBytes 765 Mbits/sec [ 5] 8.00-9.00 sec 92.1 MBytes 772 Mbits/sec [ 5] 9.00-10.00 sec 91.7 MBytes 769 Mbits/sec [ 5] 10.00-10.19 sec 17.3 MBytes 772 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 5] 0.00-10.19 sec 916 MBytes 755 Mbits/sec receiver Before the new kernel installation and reboot it showed: # iperf3 -c 192.168.1.120 --get-server-output Connecting to host 192.168.1.120, port 5201 [ 5] local 192.168.1.148 port 53616 connected to 192.168.1.120 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 13.8 MBytes 116 Mbits/sec 217 35.6 KBytes [ 5] 1.00-2.00 sec 13.7 MBytes 115 Mbits/sec 221 49.8 KBytes [ 5] 2.00-3.00 sec 13.7 MBytes 115 Mbits/sec 217 9.98 KBytes [ 5] 3.00-4.00 sec 13.7 MBytes 115 Mbits/sec 220 41.3 KBytes [ 5] 4.00-5.00 sec 13.7 MBytes 115 Mbits/sec 221 58.2 KBytes [ 5] 5.00-6.00 sec 13.7 MBytes 115 Mbits/sec 222 62.7 KBytes [ 5] 6.00-7.00 sec 13.8 MBytes 116 Mbits/sec 140 44.1 KBytes [ 5] 7.00-8.00 sec 13.8 MBytes 116 Mbits/sec 114 7.13 KBytes [ 5] 8.00-9.00 sec 13.7 MBytes 115 Mbits/sec 192 7.13 KBytes [ 5] 9.00-10.00 sec 13.7 MBytes 115 Mbits/sec 220 15.7 KBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 137 MBytes 115 Mbits/sec 1984 sender [ 5] 0.00-10.18 sec 137 MBytes 113 Mbits/sec receiver Server output: Accepted connection from 192.168.1.148, port 52047 [ 5] local 192.168.1.120 port 5201 connected to 192.168.1.148 port 53616 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 11.2 MBytes 94.0 Mbits/sec [ 5] 1.00-2.00 sec 13.7 MBytes 115 Mbits/sec [ 5] 2.00-3.00 sec 13.7 MBytes 115 Mbits/sec [ 5] 3.00-4.00 sec 13.7 MBytes 115 Mbits/sec [ 5] 4.00-5.00 sec 13.7 MBytes 115 Mbits/sec [ 5] 5.00-6.00 sec 13.7 MBytes 115 Mbits/sec [ 5] 6.00-7.00 sec 13.7 MBytes 115 Mbits/sec [ 5] 7.00-8.00 sec 13.8 MBytes 116 Mbits/sec [ 5] 8.00-9.00 sec 13.7 MBytes 115 Mbits/sec [ 5] 9.00-10.00 sec 13.7 MBytes 115 Mbits/sec [ 5] 10.00-10.18 sec 2.53 MBytes 115 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 5] 0.00-10.18 sec 137 MBytes 113 Mbits/sec receiver iperf Done. For reference: Starting devd. Autoloading module: if_ure.ko ure0 on uhub0 ure0: <Realtek USB 10/100/1000 LAN, class 0/0, rev 3.00/30.00, addr 1> on usbus2 add host 127.0.0.1: gateway lo0 fib 0: route already in table add host ::1: gateway lo0 fib 0: route already in table miibus0: <MII bus> add net fe80::: gateway ::1 on ure0 add net ff02::: gateway ::1 rgephy0: <RTL8251/8153 1000BASE-T media interface> add net ::ffff:0.0.0.0: gateway ::1 add net ::0.0.0.0: gateway ::1 PHY 0 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto ue0: <USB Ethernet> on ure0 ue0: Ethernet address: ### ue0: link state changed to DOWN . . . ue0: link state changed to UP # ifconfig lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6> inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff000000 groups: lo nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> ue0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=68009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6> ether ### inet 192.168.1.148 netmask 0xffffff00 broadcast 192.168.1.255 media: Ethernet autoselect (1000baseT <full-duplex>) status: active nd6 options=2b<PERFORMNUD,ACCEPT_RTADV,IFDISABLED,AUTO_LINKLOCAL> Hopefully, I'll get back to testing fairly soon. === Mark Millard marklmi at yahoo.com ( dsl-only.net went away in early 2018-Mar)Received on Mon Jul 27 2020 - 06:31:55 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:41:24 UTC