On Wed, Feb 03, 2021 at 06:40:50PM -0800, joe mcguckin wrote: >I went out and purchased a PCIe ethernet card - it uses the em driver. >The system boots and it is em0. > >It works fine in 100Mb mode, but in gigabit mode, it does not pass any >traffic although ifconfig reports >the card as active and that it has negotiated 1000BTX full duplex. > >I have tried plugging both the igb and em cards into 2 different switches >with the same result. Hi, Try manually setting the card's speed to gigabit mode, instead of it auto-negotiating. Speaking from experience, I have known some cards to show either packet loss or just not work at all if the speed isn't nailed up when they are talking to some switches. -- J.
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:41:27 UTC