On 23/02/2021 12:27, Toomas Soome via freebsd-current wrote: > hi! > > I have done some work to make font pickup a bit smarter (hopefully better;), but my own ability to test is limited to one bugged supermicro and one MBP with retina display… > > The phab link is https://reviews.freebsd.org/D28849 <https://reviews.freebsd.org/D28849> > > I have built loader binaries as well (bios and uefi): > loader_lua <http://148-52-235-80.sta.estpak.ee/loader_lua> > loader_lua.efi <http://148-52-235-80.sta.estpak.ee/loader_lua.efi> > > To test, you should remove screen.font= line from loader.conf and test with different resolutions. > > thanks, > toomas > _______________________________________________ > freebsd-current_at_freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org" On my Intel core2 it looks fine, it has smaller fonts than before, but this looks more like a 1280 x 1024 screen that i use. I use vbe_max_resolution="1280x1024" in /boot/loader.conf to use the new boot screens. This is 13.0-BETA3 with the latest patches of today. This is my dmesg output. ---<<BOOT>>--- Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.0-BETA3 #52 releng/13.0-n244538-d7296b893969-dirty: Tue Feb 23 15:58:29 CET 2021 root_at_srv-01.thuis.local:/usr/obj/usr/src/amd64.amd64/sys/KRNL amd64 FreeBSD clang version 11.0.1 (git_at_github.com:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) VT(vbefb): resolution 1280x1024 CPU: Intel(R) Core(TM)2 Duo CPU E6550 _at_ 2.33GHz (2327.55-MHz K8-class CPU) Origin="GenuineIntel" Id=0x6fb Family=0x6 Model=0xf Stepping=11 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> VT-x: (disabled in BIOS) HLT,PAUSE TSC: P-state invariant, performance statistics real memory = 5372903424 (5124 MB) avail memory = 5054898176 (4820 MB) Event timer "LAPIC" quality 100 ACPI APIC Table: <COMPAQ BEARLAKE> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) random: unblocking device. ioapic0: MADT APIC ID 1 != hw id 0 ioapic0 <Version 2.0> irqs 0-23 Launching APs: 1 Timecounter "TSC-low" frequency 1163773173 Hz quality 1000 KTLS: Initialized 2 threads random: entropy device external interface [ath_hal] loaded WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0. kbd1 at kbdmux0 000.000054 [4350] netmap_init netmap: loaded module WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 13.0. mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) nexus0 cryptosoft0: <software crypto> aesni0: No AES or SHA support. acpi0: <HPQOEM SLIC-BPC> acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet1: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 device_attach: hpet0 attach returned 12 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 Firmware Error (ACPI): \134_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20201113/nsarguments-311) Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0._OSC.CAPD], AE_ALREADY_EXISTS (20201113/dsfield-352) ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20201113/dswload2-639) ACPI Error: Aborting method \134_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20201113/psparse-689) pcib0: _OSC failed: AE_ALREADY_EXISTS pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0x1230-0x1237 mem 0xf0100000-0xf017ffff,0xe0000000-0xefffffff,0xf0000000-0xf00fffff irq 16 at device 2.0 on pci0 agp0: <Intel Q35 SVGA controller> on vgapci0 WARNING: Device "agp" is Giant locked and may be deleted before FreeBSD 13.0. agp0: aperture size is 256M, detected 6140k stolen memory vgapci0: Boot video device pci0: <simple comms> at device 3.0 (no driver attached) atapci0: <Intel ATA controller> port 0x1238-0x123f,0x1270-0x1273,0x1240-0x1247,0x1274-0x1277,0x11e0-0x11ef irq 18 at device 3.2 on pci0 ata2: <ATA channel> at channel 0 on atapci0 ata3: <ATA channel> at channel 1 on atapci0 pci0: <simple comms, UART> at device 3.3 (no driver attached) em0: <Intel(R) PRO/1000 Network Connection> port 0x1100-0x111f mem 0xf0180000-0xf019ffff,0xf01a5000-0xf01a5fff irq 19 at device 25.0 on pci0 em0: Using 1024 TX descriptors and 1024 RX descriptors em0: Using an MSI interrupt em0: Ethernet address: 00:22:64:19:cf:e6 em0: netmap queues/slots: TX 1/1024, RX 1/1024 uhci0: <Intel 82801I (ICH9) USB controller> port 0x1120-0x113f irq 20 at device 26.0 on pci0 usbus0 on uhci0 usbus0: 12Mbps Full Speed USB v1.0 uhci1: <Intel 82801I (ICH9) USB controller> port 0x1140-0x115f irq 21 at device 26.1 on pci0 usbus1 on uhci1 usbus1: 12Mbps Full Speed USB v1.0 uhci2: <Intel 82801I (ICH9) USB controller> port 0x1160-0x117f irq 22 at device 26.2 on pci0 usbus2 on uhci2 usbus2: 12Mbps Full Speed USB v1.0 ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf01a6000-0xf01a63ff irq 22 at device 26.7 on pci0 usbus3: EHCI version 1.0 usbus3 on ehci0 usbus3: 480Mbps High Speed USB v2.0 hdac0: <Intel 82801I HDA Controller> mem 0xf01a0000-0xf01a3fff irq 21 at device 27.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 Firmware Error (ACPI): \134_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20201113/nsarguments-311) Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0._OSC.CAPD], AE_ALREADY_EXISTS (20201113/dsfield-352) ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20201113/dswload2-639) ACPI Error: Aborting method \134_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20201113/psparse-689) pcib0: _OSC failed: AE_ALREADY_EXISTS pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0 Firmware Error (ACPI): \134_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20201113/nsarguments-311) Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0._OSC.CAPD], AE_ALREADY_EXISTS (20201113/dsfield-352) ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20201113/dswload2-639) ACPI Error: Aborting method \134_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20201113/psparse-689) pcib0: _OSC failed: AE_ALREADY_EXISTS pci2: <ACPI PCI bus> on pcib2 uhci3: <Intel 82801I (ICH9) USB controller> port 0x1180-0x119f irq 20 at device 29.0 on pci0 usbus4 on uhci3 usbus4: 12Mbps Full Speed USB v1.0 uhci4: <Intel 82801I (ICH9) USB controller> port 0x11a0-0x11bf irq 21 at device 29.1 on pci0 usbus5 on uhci4 usbus5: 12Mbps Full Speed USB v1.0 ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf01a6400-0xf01a67ff irq 20 at device 29.7 on pci0 usbus6: EHCI version 1.0 usbus6 on ehci1 usbus6: 480Mbps High Speed USB v2.0 pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci3: <ACPI PCI bus> on pcib3 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <Intel ICH9 SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x11f0-0x11ff,0x1200-0x120f irq 18 at device 31.2 on pci0 ata0: <ATA channel> at channel 0 on atapci1 ata1: <ATA channel> at channel 1 on atapci1 atapci2: <Intel ICH9 SATA300 controller> port 0x1260-0x1267,0x1280-0x1283,0x1268-0x126f,0x1284-0x1287,0x1210-0x121f,0x1220-0x122f irq 18 at device 31.5 on pci0 ata4: <ATA channel> at channel 0 on atapci2 ata5: <ATA channel> at channel 1 on atapci2 acpi_button0: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77d irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/13 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 Timecounters tick every 1.000 msec ZFS filesystem version: 5 ZFS storage pool version: features support (5000) ugen0.1: <Intel UHCI root HUB> at usbus0 ugen5.1: <Intel UHCI root HUB> at usbus5 uhub0 on usbus0 hdacc0: <Analog Devices AD1884 HDA CODEC> at cad 0 on hdac0 hdaa0: <Analog Devices AD1884 Audio Function Group> at nid 1 on hdacc0 pcm0: <Analog Devices AD1884 (Rear Analog)> at nid 18 and 21 on hdaa0 pcm1: <Analog Devices AD1884 (Front Analog)> at nid 17 and 20 on hdaa0 uhub1 on usbus5 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen3.1: <Intel EHCI root HUB> at usbus3 ugen2.1: <Intel UHCI root HUB> at usbus2 uhub2 on usbus3 uhub3 on usbus2 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen4.1: <Intel UHCI root HUB> at usbus4 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 uhub4 on usbus4 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen1.1: <Intel UHCI root HUB> at usbus1 uhub5 on usbus1 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen6.1: <Intel EHCI root HUB> at usbus6 uhub6 on usbus6 uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6 Trying to mount root from zfs:zroot/ROOT/default []... Root mount waiting for: CAM usbus0 usbus1 usbus2 usbus3 usbus4 usbus5 usbus6 uhub1: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered uhub0: 2 ports with 2 removable, self powered Root mount waiting for: CAM usbus3 usbus6 uhub6: 4 ports with 4 removable, self powered fdc0: cmd 08 failed at in byte 1 of 1 fdc0: sense intr err reading stat reg 0 fdc0: cmd 08 failed at in byte 1 of 1 fdc0: sense intr err reading stat reg 0 Root mount waiting for: CAM usbus3 usbus6 uhub2: 6 ports with 6 removable, self powered fdc0: cmd 08 failed at in byte 1 of 1 fdc0: sense intr err reading stat reg 0 Root mount waiting for: CAM fdc0: cmd 08 failed at in byte 1 of 1 fdc0: sense intr err reading stat reg 0 ugen5.2: <PixArt HP USB Optical Mouse> at usbus5 Root mount waiting for: CAM ugen5.3: <HID Keyboard HID Keyboard> at usbus5 ukbd0 on uhub1 ukbd0: <HID Keyboard> on usbus5 kbd2 at ukbd0 ukbd1 on uhub1 ukbd1: <HID Keyboard> on usbus5 kbd3 at ukbd1 Root mount waiting for: CAM ada0 at ata0 bus 0 scbus2 target 0 lun 0 ada0: <Samsung SSD 840 EVO 120GB EXT0BB0Q> ACS-2 ATA SATA 3.x device ada0: Serial Number S1D5NSBDA29837E ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada0: 114473MB (234441648 512 byte sectors) ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> ada1 at ata4 bus 0 scbus4 target 0 lun 0 ada1: <INTEL SSDSC2BW120A4 DC32> ACS-2 ATA SATA 3.x device ada1: Serial Number CVDA433402LU1207GN ada1: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada1: 114473MB (234441648 512 byte sectors) ada1: quirks=0x1<4K> cd0 at ata1 bus 0 scbus3 target 0 lun 0 cd0: <TSSTcorp CDDVDW TS-H653Q HC01> Removable CD-ROM SCSI device cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 device_attach: hpet0 attach returned 12 acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi0: cannot find EC device acpi_wmi0: Embedded MOF found ACPI: \134_SB.WMID.WQZZ: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) bridge0: Ethernet address: 58:9c:fc:10:ff:fb lo0: link state changed to UP ums0 on uhub1 ums0: <PixArt HP USB Optical Mouse, class 0/0, rev 2.00/1.00, addr 2> on usbus5 ums0: 3 buttons and [XYZ] coordinates ID=0 em0: link state changed to UP Security policy loaded: MAC/ntpd (mac_ntpd) regards JohanReceived on Tue Feb 23 2021 - 14:28:58 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:41:27 UTC