Re: Question related to FreeBSD Serial Console...

From: Aaron Wohl <freebsd_at_soith.com>
Date: Mon, 01 Sep 2003 17:22:27 -0600
My notes on getting a serial console at 115200

-must be com1
-com1 must be at port 0x3F8 irq 4
-in bios set the port and irq as above
-in bios set serial redirection to com1
-in bios set baud rate 115200
-in bios set RTS/CTS flow control
-edit (or create) /etc/make.conf to add these lines:
BOOT_COMCONSOLE_PORT=   0x3F8
BOOT_COMCONSOLE_SPEED=  115200
-cd /sys/boot
-make clean
-make
-make install
-fdisk -B
No im not kidding.  Part of the boot knowing baud rate loader lives in
the main disk boot block.
-cd /boot
-edit loader.conf
-add a line:
console=comconsole
-edit /boot.config make it read (with a return after it):
-Dh
(the above is minus D h return, thats 4 characters)
-cd /usr/src/sys/i386/conf
-edit PASODOBLE (or whatever your kernconf is called)
-add:
options               CONSPEED=115200         # Console Redirection
-cd /usr/src
-make buildkernel KERNCONF=PASODOBLE
-make installkernel KERNCONF=PASODOBLE
-reboot
-pray
Received on Mon Sep 01 2003 - 14:22:33 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:21 UTC