> Date: Sat, 10 Apr 2004 13:37:24 +0200 > From: Thorsten Greiner <thorsten_at_tgreiner.net> > Sender: owner-freebsd-current_at_freebsd.org > > > --l76fUT7nc3MelDdI > Content-Type: multipart/mixed; boundary="Q68bSM7Ycu6FN28Q" > Content-Disposition: inline > > > --Q68bSM7Ycu6FN28Q > Content-Type: text/plain; charset=us-ascii > Content-Disposition: inline > Content-Transfer-Encoding: quoted-printable > > Hi list, > > a kernel built from a recent cvsup doesn't recognize my ata > controller. I suspect this is related to the recent PCI changes by > Warner Losh. The attached dmesg shows a successful boot by a kernel > built from Apr 6th sources. > > Today's faulty one differs from the sucessful boot in that the lines > > ata0: at 0x1f0 irq 14 on atapci0 > ata1: at 0x170 irq 15 on atapci0 > > are missing. Instead the line > > atapci0: Bus reserved 0x10 bytes for rid 0x20 type 4 at 0xbfa0 > > is displayed. Of course this means that the kernel cannot find its > root device and panics later... > > Please find a dmesg from a working kernel and my kernel config > attached. OK. I see the same thing on my IBM T30. But I can narrow it down as I have a working kernel from a cvsup on the evening of April 8 and a non-working on from the morning of April 9, just after imp added his ACPI patches. Verbose boot shows nothing obvious (at least to me) I'm pretty sure that no changes were made to the ata drivers. The ata disks are simply not seen. I will attach te verbose boot. For now, I am stuck with a kernel from about 08:00 PT yesterday, I suspect. (I'm building a kernel now to confirm it.) -- R. Kevin Oberman, Network Engineer Energy Sciences Network (ESnet) Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) E-mail: oberman_at_es.net Phone: +1 510 486-8634 ---------------------------------------------------- SMAP type=01 base=0000000000000000 len=000000000009f000 SMAP type=02 base=000000000009f000 len=0000000000001000 SMAP type=02 base=00000000000d2000 len=0000000000002000 SMAP type=02 base=00000000000dc000 len=0000000000024000 SMAP type=01 base=0000000000100000 len=000000001fe70000 SMAP type=03 base=000000001ff70000 len=000000000000e000 SMAP type=04 base=000000001ff7e000 len=0000000000002000 SMAP type=02 base=000000001ff80000 len=0000000000080000 SMAP type=02 base=00000000ff800000 len=0000000000400000 SMAP type=02 base=00000000ffc00000 len=0000000000400000 Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT #89: Fri Apr 9 20:01:00 PDT 2004 root_at_puppeteer.es.net:/usr/obj/usr/src/sys/IBM-T30-D Preloaded elf kernel "/boot/kernel/kernel" at 0xc0805000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc0805278. Preloaded elf module "/boot/kernel/if_wi.ko" at 0xc08052c8. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0805374. Calibrating clock(s) ... i8254 clock: 1193146 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1198989464 Hz CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.80GHz (1198.99-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf24 Stepping = 4 Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM> real memory = 536281088 (511 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c26000 - 0x000000001f641fff, 513916928 bytes (125468 pages) avail memory = 514985984 (491 MB) bios32: Found BIOS32 Service Directory header at 0xc00f6fe0 bios32: Entry = 0xfd7e0 (c00fd7e0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd770+0x18e pnpbios: Found PnP BIOS data at 0xc00f7040 pnpbios: Entry = f0000:9d54 Rev = 1.0 pnpbios: Event flag at 4b4 Other BIOS signatures found: wlan: <802.11 Link Layer> null: <null device, zero device> mem: <memory & I/O> Pentium Pro MTRR support enabled random: <entropy source, Software, Yarrow> cpu0 on motherboard npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <IBM TP-1I> on motherboard acpi0: [GIANT-LOCKED] acpi_ec0: <Embedded Controller: ECDT, GPE 0x1c, GLK> port 0x66,0x62 on acpi0 pci_open(1): mode 1 addr port (0x0cf8) is 0x8000f904 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=1a308086) pcibios: BIOS version 2.10 Found $PIR table, 14 entries at 0xc00fdeb0 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 0 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 2 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 2 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 1 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 1 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 1 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 1 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 2 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 2 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15 slot 1 2 2 A 0x62 3 4 5 6 7 9 10 11 12 14 15 slot 1 2 2 B 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 2 3 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 2 3 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 2 3 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 2 3 D 0x63 3 4 5 6 7 9 10 11 12 14 15 slot 2 9 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 slot 2 9 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15 slot 2 9 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15 slot 2 9 0 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 9 1 A 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 9 2 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 9 2 B 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 2 8 A 0x68 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 B 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 D 0x6b 3 4 5 6 7 9 10 11 12 14 15 embedded 0 31 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 31 B 0x61 3 4 5 6 7 9 10 11 12 14 15 AcpiOsDerivePciId: bus 0 dev 31 func 0 AcpiOsDerivePciId: bus 0 dev 0 func 0 AcpiOsDerivePciId: bus 2 dev 0 func 0 AcpiOsDerivePciId: bus 2 dev 0 func 1 acpi0: Power Button (fixed) ACPI timer looks GOOD min = 4, max = 5, width = 1 ACPI timer looks GOOD min = 4, max = 5, width = 1 ACPI timer looks GOOD min = 4, max = 5, width = 1 ACPI timer looks GOOD min = 4, max = 5, width = 1 ACPI timer looks GOOD min = 4, max = 5, width = 1 ACPI timer looks GOOD min = 4, max = 5, width = 1 ACPI timer looks GOOD min = 4, max = 5, width = 1 ACPI timer looks GOOD min = 4, max = 5, width = 1 ACPI timer looks GOOD min = 4, max = 5, width = 1 ACPI timer looks GOOD min = 4, max = 5, width = 1 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) acpi_cpu0: <CPU> port 0x530-0x537 on acpi0 mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ \_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.0 \_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.1 \_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.2 \_SB_.LNKH irq 0: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.3 \_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.31.0 \_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.31.1 ---- before setting priority for links ------------ \_SB_.LNKH: interrupts: 3 4 5 6 7 9 10 11 penalty: 1110 1110 110 1110 1110 110 110 610 references: 1 priority: 0 ---- before fixup boot-disabled links ------------- \_SB_.LNKH: interrupts: 3 4 5 6 7 9 10 11 penalty: 1110 1110 110 1110 1110 110 110 610 references: 1 priority: 672 ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.0 \_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.1 \_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.2 \_SB_.LNKH irq 10: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.3 \_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.31.0 \_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.31.1 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base e0000000, size 26, enabled found-> vendor=0x8086, dev=0x1a30, revid=0x04 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x1a31, revid=0x04 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x60 (2880 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00001800, size 5, enabled pcib0: matched entry for 0.29.INTA (src \_SB_.LNKA) pcib0: slot 29 INTA is routed to irq 11 found-> vendor=0x8086, dev=0x2482, revid=0x02 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type 4, range 32, base 00001820, size 5, enabled pcib0: matched entry for 0.29.INTB (src \_SB_.LNKD) pcib0: slot 29 INTB is routed to irq 11 found-> vendor=0x8086, dev=0x2484, revid=0x02 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type 4, range 32, base 00001840, size 5, enabled pcib0: matched entry for 0.29.INTC (src \_SB_.LNKC) pcib0: slot 29 INTC is routed to irq 11 found-> vendor=0x8086, dev=0x2487, revid=0x02 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 found-> vendor=0x8086, dev=0x2448, revid=0x42 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x248c, revid=0x02 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 000001f0, size 3, enabled map[18]: type 4, range 32, base 00000170, size 3, enabled map[20]: type 4, range 32, base 00001860, size 4, enabled map[24]: type 1, range 32, base 00000000, size 10, memory disabled found-> vendor=0x8086, dev=0x248a, revid=0x02 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[20]: type 4, range 32, base 00001880, size 5, enabled pcib0: matched entry for 0.31.INTB (src \_SB_.LNKB) pcib0: slot 31 INTB is routed to irq 11 found-> vendor=0x8086, dev=0x2483, revid=0x02 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[10]: type 4, range 32, base 00001c00, size 8, enabled map[14]: type 4, range 32, base 000018c0, size 6, enabled pcib0: matched entry for 0.31.INTB (src \_SB_.LNKB) pcib0: slot 31 INTB is routed to irq 11 found-> vendor=0x8086, dev=0x2485, revid=0x02 bus=0, slot=31, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[10]: type 4, range 32, base 00002400, size 8, enabled map[14]: type 4, range 32, base 00002000, size 7, enabled pcib0: matched entry for 0.31.INTB (src \_SB_.LNKB) pcib0: slot 31 INTB is routed to irq 11 found-> vendor=0x8086, dev=0x2486, revid=0x02 bus=0, slot=31, func=6 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 agp0: <Intel 82845 host to AGP bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0 agp0: Bus reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe0000000 agp0: allocating GATT for aperture of size 64M pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x3000-0x3fff pcib1: memory decode 0xd0100000-0xd01fffff pcib1: prefetched decode 0xe8000000-0xefffffff ---- initial configuration ------------------------ \_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 1.0.0 \_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 1.0.1 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 1.0.0 \_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 1.0.1 pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 3, range 32, base e8000000, size 27, enabled pcib1: device (null) requested decoded memory range 0xe8000000-0xefffffff map[14]: type 4, range 32, base 00003000, size 8, enabled pcib1: device (null) requested decoded I/O range 0x3000-0x30ff map[18]: type 1, range 32, base d0100000, size 16, enabled pcib1: device (null) requested decoded memory range 0xd0100000-0xd010ffff pcib1: matched entry for 1.0.INTA (src \_SB_.LNKA) pcib1: slot 0 INTA is routed to irq 11 found-> vendor=0x1002, dev=0x4c57, revid=0x00 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0387, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 pci1: <display, VGA> at device 0.0 (no driver attached) uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f irq 11 at device 29.0 on pci0 uhci0: Bus reserved 0x20 bytes for rid 0x20 type 4 at 0x1800 uhci0: [GIANT-LOCKED] usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f irq 11 at device 29.1 on pci0 uhci1: Bus reserved 0x20 bytes for rid 0x20 type 4 at 0x1820 uhci1: [GIANT-LOCKED] usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x1840-0x185f irq 11 at device 29.2 on pci0 uhci2: Bus reserved 0x20 bytes for rid 0x20 type 4 at 0x1840 uhci2: [GIANT-LOCKED] usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 8 pcib2: I/O decode 0x4000-0x8fff pcib2: memory decode 0xd0200000-0xdfffffff pcib2: prefetched decode 0xf0000000-0xf80fffff pcib2: Subtractively decoded bridge. ---- initial configuration ------------------------ \_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.0.0 \_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.0.1 \_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.0.2 \_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.1.0 \_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.2.0 \_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.2.1 \_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.2.2 \_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.2.3 \_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.4.0 \_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.4.1 \_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.4.2 \_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.4.3 \_SB_.LNKE irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.8.0 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.0.0 \_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.0.1 \_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.0.2 \_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.1.0 \_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.2.0 \_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.2.1 \_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.2.2 \_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.2.3 \_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.4.0 \_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.4.1 \_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.4.2 \_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.4.3 \_SB_.LNKE irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.8.0 pci2: <ACPI PCI bus> on pcib2 pci2: physical bus=2 map[10]: type 1, range 32, base 50000000, size 12, enabled pcib2: device (null) requested decoded memory range 0x50000000-0x50000fff pcib2: matched entry for 2.0.INTA (src \_SB_.LNKA) pcib2: slot 0 INTA is routed to irq 11 found-> vendor=0x104c, dev=0xac55, revid=0x01 bus=2, slot=0, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0107, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 51000000, size 12, enabled pcib2: device (null) requested decoded memory range 0x51000000-0x51000fff pcib2: matched entry for 2.0.INTB (src \_SB_.LNKB) pcib2: slot 0 INTB is routed to irq 11 found-> vendor=0x104c, dev=0xac55, revid=0x01 bus=2, slot=0, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0107, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns) intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 3, range 32, base f8000000, size 12, enabled pcib2: device (null) requested decoded memory range 0xf8000000-0xf8000fff pcib2: matched entry for 2.2.INTA (src \_SB_.LNKC) pcib2: slot 2 INTA is routed to irq 11 found-> vendor=0x1260, dev=0x3873, revid=0x01 bus=2, slot=2, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base d0200000, size 12, enabled pcib2: device (null) requested decoded memory range 0xd0200000-0xd0200fff map[14]: type 4, range 32, base 00008000, size 6, enabled pcib2: device (null) requested decoded I/O range 0x8000-0x803f pcib2: matched entry for 2.8.INTA (src \_SB_.LNKE) pcib2: slot 8 INTA is routed to irq 11 found-> vendor=0x8086, dev=0x1031, revid=0x42 bus=2, slot=8, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 cbb0: <TI1520 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 at device 0.0 on pci2 cbb0: Bus reserved 0x1000 bytes for rid 0x10 type 3 at 0x50000000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0xac55104c 0x02100107 0x06070001 0x00824008 0x10: 0x50000000 0x020000a0 0xb0050302 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 0x40: 0x05121014 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x0844d071 0x00000000 0x00000000 0x01d21022 0x90: 0x406402c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe120001 0x00c00000 0x00000001 0x0000000f 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 cbb1: <TI1520 PCI-CardBus Bridge> mem 0x51000000-0x51000fff irq 11 at device 0.1 on pci2 cbb1: Bus reserved 0x1000 bytes for rid 0x10 type 3 at 0x51000000 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 cbb1: [MPSAFE] cbb1: PCI Configuration space: 0x00: 0xac55104c 0x02100107 0x06070001 0x00824008 0x10: 0x51000000 0x020000a0 0xb0080602 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740020b 0x40: 0x05121014 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x0844d071 0x00000000 0x00000000 0x01d21022 0x90: 0x406402c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe120001 0x00c00000 0x00000001 0x0000000f 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 wi0: <Intersil Prism2.5> mem 0xf8000000-0xf8000fff irq 11 at device 2.0 on pci2 wi0: Bus reserved 0x1000 bytes for rid 0x10 type 3 at 0xf8000000 wi0: [GIANT-LOCKED] wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI) wi0: Intersil Firmware: Primary (1.1.1), Station (1.7.4) wi0: bpf attached wi0: Ethernet address: 00:05:3c:03:86:b9 wi0: bpf attached wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps wi0: bpf attached fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0x8000-0x803f mem 0xd0200000-0xd0200fff irq 11 at device 8.0 on pci2 fxp0: Bus reserved 0x1000 bytes for rid 0x10 type 3 at 0xd0200000 fxp0: using memory space register mapping fxp0: PCI IDs: 8086 1031 1014 0209 0042 fxp0: Dynamic Standby mode is disabled miibus0: <MII bus> on fxp0 inphy0: <i82562ET 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached fxp0: Ethernet address: 00:09:6b:c2:86:92 fxp0: [GIANT-LOCKED] isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 UDMA100 controller> port 0x1860-0x186f,0x170-0x177,0x1f0-0x1f7 at device 31.1 on pci0 atapci0: Bus reserved 0x10 bytes for rid 0x20 type 4 at 0x1860 ichsmb0: <Intel 82801CA (ICH3) SMBus controller> port 0x1880-0x189f irq 11 at device 31.3 on pci0 ichsmb0: Bus reserved 0x20 bytes for rid 0x20 type 4 at 0x1880 ichsmb0: [GIANT-LOCKED] smbus0: <System Management Bus> on ichsmb0 smb0: <SMBus generic I/O> on smbus0 pcm0: <Intel ICH3 (82801CA)> port 0x18c0-0x18ff,0x1c00-0x1cff irq 11 at device 31.5 on pci0 pcm0: Bus reserved 0x100 bytes for rid 0x10 type 4 at 0x1c00 pcm0: Bus reserved 0x40 bytes for rid 0x14 type 4 at 0x18c0 pcm0: [GIANT-LOCKED] pcm0: <Analog Devices AD1881A AC97 Codec (id = 0x41445348)> pcm0: Codec features headphone, 6 bit master volume, Analog Devices Phat Stereo pcm0: Primary codec extended features variable rate PCM pcm0: sndbuf_setmap 2f3000, 4000; 0xdbea7000 -> 2f3000 pcm0: sndbuf_setmap 2fa000, 4000; 0xdbeab000 -> 2fa000 pci0: <simple comms> at device 31.6 (no driver attached) pci0:31:6: setting power state D3 unknown: not probed (disabled) unknown: not probed (disabled) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x54ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0 irq 12 on acpi0 psm0: current command byte:0047 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 00 00 64 psm: status 00 03 64 psm: status 00 03 64 psm: data 08 00 00 psm: status 10 00 64 psm: status 00 02 64 psm: data 08 00 00 psm: status 00 02 64 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A, console unknown: not probed (disabled) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x41 0x41 0x41 0x41 sio1: probe failed test(s): 0 1 2 4 6 7 9 acpi_ec0: Changing GLK from 1 to 0 mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) unknown: not probed (disabled) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) acpi_cmbat0: <Control Method Battery> on acpi0 unknown: not probed (disabled) acpi_acad0: <AC Adapter> on acpi0 mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) unknown: not probed (disabled) unknown: not probed (disabled) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) unknown: not probed (disabled) unknown: not probed (disabled) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) unknown: not probed (disabled) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x41 0x41 0x41 0x41 sio1: probe failed test(s): 0 1 2 4 6 7 9 mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) unknown: not probed (disabled) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) unknown: not probed (disabled) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) unknown: not probed (disabled) unknown: not probed (disabled) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it sio: sio0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xe0000-0xeffff,0xdc000-0xdffff,0xd1000-0xd1fff,0xd0000-0xd0fff,0xc0000-0xcffff on isa0 pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) ppc0: not probed (disabled) sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio1: not probed (disabled) sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k vga0: vga: WARNING: video mode switching is not fully supported on this adapter VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 64 4f 4f 88 59 9e 9a 1f 00 4f 0d 0e 00 00 07 80 92 83 8f 28 1f 8f 9b a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 67 64 4f 4f 88 59 9e 9a 1f 00 4f 0d 0e 00 00 07 80 92 83 8f 28 1f 8f 9b a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 1198989464 Hz quality 800 Timecounters tick every 10.000 msec lo0: bpf attached pcm0: measured ac97 link rate at 47995 Hz, will use 48000 Hz acpi_cpu0: set speed to 100.0% acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% acpi_cmbat0: battery initialization start acpi_ec0: info: new max delay is 25 us acpi_cmbat0: battery initialization done, tried 1 times acpi_acad0: acline initialization start system power profile changed to 'economy' acpi_acad0: Off Line Mounting root from ufs:/dev/ad0s2a setrootbyname failed ffs_mountroot: can't find rootvp Root mount failed: 6 Manual root filesystem specification: <fstype>:<device> Mount <device> using filesystem <fstype> eg. ufs:da0s1a ? List valid disk boot devices <empty line> Abort manual input mountroot>Received on Sat Apr 10 2004 - 06:58:13 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:50 UTC