This is on an ASUS P4P800 GENERIC kernel. If I let the machine try to boot normally (hands off, or option 1 [default]) I get: ACPI autoload failed - no such file or directory as the first line, and it fails to boot. If I choose option 2 (ACPI Disabled) then I don't get the 'ACPI autoload failed' line, but it still fails to boot. (see my previous message '5.3 Beta1 boot problems' for failure) If I choose option 2 (Safe mode) I get the following failure mode: ------------------------------------------------------------------ Fatal trap 9: general protection fault while in kernel mode cpuid = 0; apic id = 00 instruction pointer = 0x58 :0x2dac stack pointer = 0x10 :0xf80 frame pointer = 0x10 :0x0 code segment = base 0xc00f0000, limit 0xffff, type 0x1b = DPL 0, pres 1, def32 0, gran 0 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 0 (swapper) [thread 0] Stopped at 0x2dac: *** error reading from address 2dac *** ------------------------------------------------------------------ Starting with option 4 (Single user) fails with the 'ACPI autoload failed' line. Starting with option 5 (Verbos logging) fails with the 'ACPI autoload failed' line. Starting with option 6 (Escape to loader prompt) gets me to the loader prompt. If I then type 'boot-conf', it boots just fine. I would really really like to get this problem fixed before 5.3-Release (Booting worked fine as of 5.2-CURRENT 8-4-2004). This is a spare machine, so I can take any steps necessary to help debug this. I can also grant access to anybody willing to work on this problem. Please let me know what I can do to help resolve this problem. dmesg from successful 'boot-conf' boot follows: oregon root:~#>dmesg Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-BETA2 #9: Sat Aug 28 09:29:05 MDT 2004 root_at_oregon.etv.net:/usr/obj/usr/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 2.60GHz (2598.76-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA ,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory = 1072889856 (1023 MB) avail memory = 1040351232 (992 MB) ACPI APIC Table: <A M I OEMAPIC > ioapic0 <Version 2.0> irqs 0-23 on motherboard npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <A M I OEMXSDT> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82865 host to AGP bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P1 - AE_NOT_FOUND pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xef00-0xef1f irq 16 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xef20-0xef3f irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xef40-0xef5f irq 18 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xef80-0xef9f irq 16 at device 29.3 on pci0 uhci3: [GIANT-LOCKED] usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib2 skc0: <3Com 3C940 Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfeafc000-0xfeafffff irq 22 at device 5.0 on pci2 skc0: 3Com Gigabit LOM (3C940) sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 sk0: Ethernet address: 00:0c:6e:54:4b:25 miibus0: <MII bus> on sk0 e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto skc0: [GIANT-LOCKED] atapci0: <Promise PDC20319 SATA150 controller> port 0xdc00-0xdc7f,0xdfa0-0xdfaf,0xdf00-0xdf3f mem 0xfeac0000-0xfeadffff,0xfeafb000-0xfeafbfff irq 21 at device 9.0 on pci2 atapci0: failed: rid 0x20 is memory, requested 4 ata2: channel #0 on atapci0 ata3: channel #1 on atapci0 ata4: channel #2 on atapci0 ata5: channel #3 on atapci0 fxp0: <Intel 82550 Pro/100 Ethernet> port 0xde80-0xdebf mem 0xfeaa0000-0xfeabffff,0xfeafa000-0xfeafafff irq 23 at device 11.0 on pci2 miibus1: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus1 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:02:b3:d1:f7:ad fxp0: [GIANT-LOCKED] isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <Intel ICH5 UDMA100 controller> port 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: channel #0 on atapci1 ata1: channel #1 on atapci1 atapci2: <Intel ICH5 SATA150 controller> port 0xef60-0xef6f,0xefa8-0xefab,0xefa0-0xefa7,0xefac-0xefaf,0xefe0-0xefe7 irq 18 at device 31.2 on pci0 ata6: channel #0 on atapci2 ata7: channel #1 on atapci2 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pci0: <multimedia, audio> at device 31.5 (no driver attached) acpi_button0: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2e8-0x2ef irq 3 on acpi0 sio1: type 16550A ppc0 port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 orm0: <ISA Option ROMs> at iomem 0xc8000-0xc97ff,0xc0000-0xc7fff on isa0 pmtimer0 on isa0 fdc0: ready for input in output fdc0: cmd 3 failed at out byte 1 of 3 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 2598759924 Hz quality 800 Timecounters tick every 10.000 msec ATAPI_RESET time = 80us acd0: CDROM <FX54++M/Y01E> at ata0-master UDMA33 ad12: 76319MB <ST380013AS/3.05> [155061/16/63] at ata6-master SATA150 ad14: 76319MB <ST380013AS/3.05> [155061/16/63] at ata7-master SATA150 Mounting root from ufs:/dev/ad12s1aReceived on Sat Aug 28 2004 - 21:10:26 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:09 UTC