On Wed, 01 Dec 2004 10:20:01 +0100, Pav Lucistnik <pav_at_FreeBSD.org> wrote: > Craig Rodrigues píše v st 01. 12. 2004 v 01:32 -0500: >> On Wed, Dec 01, 2004 at 02:39:09PM +0900, NAKATA Maho wrote: >> > In Message-ID: <20040923032045.GA52428_at_crodrigues.org> >> > > acd0: FAILURE - REPORT_KEY ILLEGAL REQUEST asc=0x6f ascq=0x04 >> error=4<ABORTED> >> > > >> > > This is my brand of DVD player: >> > > acd0: <LITE-ON DVDRW LDW-811S/HS06> CDRW drive at ata0 as slave >> > >> > I also encountered the exact problem. >> > acd0: DVDR <MATSHITADVD-RAM UJ-812/K103> at ata1-master UDMA33 >> >> Hi, >> >> Garrett Wollman explained this quite nicely to me. >> In the MMC-3 standard (SCSI) at T10.org, there is a >> standard section on sense codes: >> >> 6F/04 R MEDIA REGION CODE IS MISMATCHED TO LOGICAL UNIT >> REGION >> >> When you get a new DVD player, the DVD-ROM will adopt the region >> code of the first DVD that it plays. If you want to change >> the region code on your DVD drive, you typically need to download >> proprietary utilities or firmware for your DVD drive. >> Most DVD drives only allow you to change the region code 5 times. >> >> I haven't figured out how to change the firmware on my LITE-ON >> drive, because LITE-ON only supplies Windows utilities, and my >> machine is FreeBSD only. > > I had good results with FreeDOS bootup from CD-ROM, then swapping CDs > for a second one with DOS based Mediatek flashing utility and firmware > image. I could whip up a page with downloads and instructions, but it's > all easily googlabe. Look for bootdisk.iso, MTKFLASH.EXE and BIN > firmwares (unofficial). I am planning to create a WinXP livecd with include LtnFlash to disable the RPC (from RPC 2 to RPC 1). Or, I can unhook DVD and put on other machine to do the task with LtnFlash. Cheers, Mezz -- mezz7_at_cox.net - mezz_at_FreeBSD.org FreeBSD GNOME Team http://www.FreeBSD.org/gnome/ - gnome_at_FreeBSD.orgReceived on Wed Dec 01 2004 - 18:15:38 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:23 UTC