Well to add to this thread, I have 5.2-RC running postgresql, apache mod_perl, and a few other applications under a moderate load on a new Dell Poweredge 2600. The only problems I have had is with a couple of ports not wanting to install. Chris ----- Original Message ----- From: "Jamie Bowden" <ragnar_at_sysabend.org> To: <current_at_FreeBSD.org> Sent: Tuesday, January 06, 2004 6:31 PM Subject: 5.2-RC appears happy on the following hardware config. > > Since I'm running it on my laptop, I went ahead and moved from RELENG_5_1 > to RELENG_5_2 on my desktop. I CVSup'd around 5:30PM EST this afternoon. > > I've got FreeBSD installed on an SATA150 drive, and it's performing very > well with no issues so far. I've seen messages fairly recently from > others having SATA problems, but the Intel ICH5 controller appears to be > unaffected from here. > > Quick hardware overview: > > Abit IC7 motherboard > P4/3Ghz Canterwood CPU > 4x512MB DDR400/PC3200 DIMM RAM > ATI Radeon 9800 Pro graphics > Creative SB Audigy Platinum EX > Pinnacle PCTV Pro > Adaptec 2940UW > Intel Etherexpress Pro/100+ > WDC ATA100 20GB HDD > WDC ATA100 30GB HDD > Maxtor SATA150 80GB HDD > Imation LS-120 Superdrive > Pioneer DVD-RW > Plextor Ultraplex 40MAX > Plextor Plexwriter 8/20 > > Dmesg: > > 9:06pm yakko /home/jamie %dmesg > Copyright (c) 1992-2003 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 5.2-RC #1: Tue Jan 6 18:53:26 EST 2004 > jamie_at_yakko:/usr/obj/usr/src/sys/yakko > Preloaded elf kernel "/boot/kernel/kernel" at 0xc08ee000. > ACPI APIC Table: <IntelR AWRDACPI> > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (3006.83-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA ,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Hyperthreading: 2 logical CPUs > real memory = 2147418112 (2047 MB) > avail memory = 2080673792 (1984 MB) > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > ioapic0: Changing APIC ID to 2 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > Pentium Pro MTRR support enabled > acpi0: <IntelR AWRDACPI> on motherboard > pcibios: BIOS version 2.10 > Using $PIR table, 12 entries at 0xc00fddf0 > acpi0: Power Button (fixed) > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 > acpi_cpu0: <CPU> on acpi0 > acpi_cpu1: <CPU> on acpi0 > acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0 > acpi_button0: <Power Button> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > agp0: <Intel 82875P host to AGP bridge> mem 0xd8000000-0xdfffffff at > device 0.0 on pci0 > pcib1: <PCI-PCI bridge> at device 1.0 on pci0 > pci1: <PCI bus> on pcib1 > pcib1: slot 0 INTA is routed to irq 16 > pci1: <display, VGA> at device 0.0 (no driver attached) > pci1: <display> at device 0.1 (no driver attached) > uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xbc00-0xbc1f irq > 16 at device 29.0 on pci0 > usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > ums0: Logitech USB Mouse, rev 1.10/6.10, addr 2, iclass 3/1 > ums0: 3 buttons and Z dir. > ugen0: Microsoft SideWinder Force Feedback 2 Joystick, rev 1.10/a.00, addr > 3 > uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xb000-0xb01f irq > 19 at device 29.1 on pci0 > usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 > usb1: USB revision 1.0 > uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xb400-0xb41f irq > 18 at device 29.2 on pci0 > usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 > usb2: USB revision 1.0 > uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xb800-0xb81f irq > 16 at device 29.3 on pci0 > usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3 > usb3: USB revision 1.0 > uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub3: 2 ports with 2 removable, self powered > ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf4101000-0xf41013ff irq > 23 at device 29.7 on pci0 > ehci_pci_attach: companion usb0 > ehci_pci_attach: companion usb1 > ehci_pci_attach: companion usb2 > ehci_pci_attach: companion usb3 > usb4: EHCI version 1.0 > usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 > usb4: <EHCI (generic) USB 2.0 controller> on ehci0 > usb4: USB revision 2.0 > uhub4: (0x8086) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 > uhub4: 8 ports with 8 removable, self powered > pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci2: <ACPI PCI bus> on pcib2 > fwohci0: <Texas Instruments TSB43AB23> mem > 0xf3100000-0xf3103fff,0xf3109000-0xf31097ff irq 18 at device 2.0 on pci2 > fwohci0: OHCI version 1.10 (ROM=1) > fwohci0: No. of Isochronous channel is 4. > fwohci0: EUI64 00:50:8d:00:00:fa:0f:a7 > fwohci0: Phy 1394a available S400, 3 ports. > fwohci0: Link S400, max_rec 2048 bytes. > firewire0: <IEEE1394(FireWire) bus> on fwohci0 > fwe0: <Ethernet over FireWire> on firewire0 > if_fwe0: Fake Ethernet address: 02:50:8d:fa:0f:a7 > sbp0: <SBP-2/SCSI over FireWire> on firewire0 > fwohci0: Initiate bus reset > fwohci0: BUS reset > fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode > firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) > firewire0: bus manager 0 (me) > fxp0: <Intel 82558 Pro/100 Ethernet> port 0xa000-0xa01f mem > 0xf3000000-0xf30fffff,0xf4000000-0xf4000fff irq 20 at device 4.0 on pci2 > fxp0: Ethernet address 00:a0:c9:e1:6d:b0 > miibus0: <MII bus> on fxp0 > inphy0: <i82555 10/100 media interface> on miibus0 > inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > pci2: <multimedia, audio> at device 6.0 (no driver attached) > fwohci1: vendor=1102, dev=4001 > fwohci1: <1394 Open Host Controller Interface> mem > 0xf3104000-0xf3107fff,0xf3108000-0xf31087ff irq 23 at device 6.2 on pci2 > fwohci1: OHCI version 1.10 (ROM=0) > fwohci1: No. of Isochronous channel is 4. > fwohci1: EUI64 00:02:3c:00:21:04:db:0a > fwohci1: Phy 1394a available S400, 2 ports. > fwohci1: Link S400, max_rec 2048 bytes. > firewire1: <IEEE1394(FireWire) bus> on fwohci1 > fwe1: <Ethernet over FireWire> on firewire1 > if_fwe1: Fake Ethernet address: 02:02:3c:04:db:0a > sbp1: <SBP-2/SCSI over FireWire> on firewire1 > fwohci1: Initiate bus reset > fwohci1: BUS reset > fwohci1: node_id=0xc800ffc1, gen=1, CYCLEMASTER mode > firewire1: 2 nodes, maxhop <= 1, cable IRM = 1 (me) > firewire1: bus manager 1 (me) > ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xac00-0xacff mem > 0xf310a000-0xf310afff irq 23 at device 7.0 on pci2 > aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs > bktr0: <BrookTree 878> mem 0xf4001000-0xf4001fff irq 17 at device 9.0 on > pci2 > bktr0: Detected a MSP3451G-A2 at 0x80 > bktr0: Pinnacle/Miro TV, Temic NTSC tuner, msp3400c stereo. > pci2: <multimedia> at device 9.1 (no driver attached) > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH5 UDMA100 controller> port > 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0 > ata0: at 0x1f0 irq 14 on atapci0 > ata0: [MPSAFE] > ata1: at 0x170 irq 15 on atapci0 > ata1: [MPSAFE] > atapci1: <Intel ICH5 SATA150 controller> port > 0xd000-0xd00f,0xcc00-0xcc03,0xc800-0xc807,0xc400-0xc403,0xc000-0xc007 irq > 18 at device 31.2 on pci0 > atapci1: [MPSAFE] > ata2: at 0xc000 on atapci1 > ata2: [MPSAFE] > ata3: at 0xc800 on atapci1 > ata3: [MPSAFE] > ichsmb0: <Intel 82801EB (ICH5) SMBus controller> port 0x500-0x51f irq 17 > at device 31.3 on pci0 > smbus0: <System Management Bus> on ichsmb0 > sio0 port 0x3f8-0x3ff irq 4 on acpi0 > sio0: type 16550A > ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/9 bytes threshold > ppbus0: <Parallel port bus> on ppc0 > plip0: <PLIP network interface> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > kbd0 at atkbd0 > npx0: [FAST] > npx0: <math processor> on motherboard > npx0: INT 16 interface > orm0: <Option ROMs> at iomem 0xd0000-0xd07ff,0xc0000-0xccfff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounters tick every 10.000 msec > IPsec: Initialized Security Association Processing. > GEOM: create disk ad0 dp=0xc86f1a60 > ad0: 19092MB <WDC WD200BB-00AUA1> [38792/16/63] at ata0-master UDMA100 > GEOM: create disk ad1 dp=0xc86f1860 > ad1: 28629MB <WDC WD300BB-00AUA1> [58168/16/63] at ata0-slave UDMA100 > GEOM: create disk afd0 dp=0xc86f106c > afd0: REMOVABLE <LS-120 VER5 00 UHD Floppy> at ata1-master WDMA1 > acd0: DVDR <PIONEER DVD-RW DVR-105> at ata1-slave UDMA33 > GEOM: create disk ad4 dp=0xc84c4960 > ad4: 78167MB <Maxtor 6Y080M0> [158816/16/63] at ata2-master UDMA100 > Waiting 15 seconds for SCSI devices to settle > ums0: at uhub0 port 1 (addr 2) disconnected > ums0: detached > ums0: Logitech USB Mouse, rev 1.10/6.10, addr 2, iclass 3/1 > ums0: 3 buttons and Z dir. > ugen0: at uhub0 port 2 (addr 3) disconnected > ugen0: detached > uhid0: Microsoft SideWinder Force Feedback 2 Joystick, rev 1.10/a.00, addr > 3, iclass 3/0 > GEOM: create disk cd0 dp=0xc83d3e00 > GEOM: create disk cd1 dp=0xc83d3600 > SMP: AP CPU #1 Launched! > cd0 at ahc0 bus 0 target 5 lun 0 > cd0: <PLEXTOR CD-ROM PX-40TS 1.13> Removable CD-ROM SCSI-2 device > cd0: 20.000MB/s transfers (20.000MHz, offset 15) > cd0: Attempt to query device size failed: NOT READY, Medium not present - > tray closed > cd1 at ahc0 bus 0 target 6 lun 0 > cd1: <PLEXTOR CD-R PX-R820T 1.08> Removable CD-ROM SCSI-2 device > cd1: 10.000MB/s transfers (10.000MHz, offset 8) > cd1: Attempt to query device size failed: NOT READY, Medium not present - > tray closed > Mounting root from ufs:/dev/ad4s2a > > > 9:07pm yakko /home/jamie %uname -a > FreeBSD yakko 5.2-RC FreeBSD 5.2-RC #1: Tue Jan 6 18:53:26 EST 2004 > jamie_at_yakko:/usr/obj/usr/src/sys/yakko i386 > > > 9:07pm yakko /home/jamie %runas pciconf -lv > agp0_at_pci0:0:0: class=0x060000 card=0x1022147b chip=0x25788086 rev=0x02 > hdr=0x00 > vendor = 'Intel Corporation' > device = '82875P Memory Controller Hub' > class = bridge > subclass = HOST-PCI > pcib1_at_pci0:1:0: class=0x060400 card=0x00000000 chip=0x25798086 rev=0x02 > hdr=0x01 > vendor = 'Intel Corporation' > device = '82875P Processor to AGP Controller' > class = bridge > subclass = PCI-PCI > uhci0_at_pci0:29:0: class=0x0c0300 card=0x1022147b chip=0x24d28086 > rev=0x02 hdr=0x00 > vendor = 'Intel Corporation' > device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1' > class = serial bus > subclass = USB > uhci1_at_pci0:29:1: class=0x0c0300 card=0x1022147b chip=0x24d48086 > rev=0x02 hdr=0x00 > vendor = 'Intel Corporation' > device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2' > class = serial bus > subclass = USB > uhci2_at_pci0:29:2: class=0x0c0300 card=0x1022147b chip=0x24d78086 > rev=0x02 hdr=0x00 > vendor = 'Intel Corporation' > device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3' > class = serial bus > subclass = USB > uhci3_at_pci0:29:3: class=0x0c0300 card=0x1022147b chip=0x24de8086 > rev=0x02 hdr=0x00 > vendor = 'Intel Corporation' > device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4' > class = serial bus > subclass = USB > ehci0_at_pci0:29:7: class=0x0c0320 card=0x1022147b chip=0x24dd8086 > rev=0x02 hdr=0x00 > vendor = 'Intel Corporation' > device = '82801EB/ER (ICH4/ICH5R) USB EHCI Controller' > class = serial bus > subclass = USB > pcib2_at_pci0:30:0: class=0x060400 card=0x00000000 chip=0x244e8086 > rev=0xc2 hdr=0x01 > vendor = 'Intel Corporation' > device = '82801BA/CA/DB/EB/ER (ICH2/3/4/5/5R) Hub Interface to PCI > Bridge' > class = bridge > subclass = PCI-PCI > isab0_at_pci0:31:0: class=0x060100 card=0x00000000 chip=0x24d08086 > rev=0x02 hdr=0x00 > vendor = 'Intel Corporation' > device = '82801EB/ER (ICH5/ICH5R) LPC Interface Bridge' > class = bridge > subclass = PCI-ISA > atapci0_at_pci0:31:1: class=0x01018a card=0x1022147b chip=0x24db8086 > rev=0x02 hdr=0x00 > vendor = 'Intel Corporation' > device = '82801EB/ER (ICH5/ICH5R) EIDE Controller' > class = mass storage > subclass = ATA > atapci1_at_pci0:31:2: class=0x01018f card=0x1022147b chip=0x24d18086 > rev=0x02 hdr=0x00 > vendor = 'Intel Corporation' > device = '82801EB (ICH5) SATA Controller' > class = mass storage > subclass = ATA > ichsmb0_at_pci0:31:3: class=0x0c0500 card=0x1022147b chip=0x24d38086 > rev=0x02 hdr=0x00 > vendor = 'Intel Corporation' > device = '82801EB/ER (ICH5/ICH5R) SMBus Controller' > class = serial bus > subclass = SMBus > none0_at_pci1:0:0: class=0x030000 card=0x00021002 chip=0x4e481002 rev=0x00 > hdr=0x00 > vendor = 'ATI Technologies' > device = 'Radeon 9800 Pro' > class = display > subclass = VGA > none1_at_pci1:0:1: class=0x038000 card=0x00031002 chip=0x4e681002 rev=0x00 > hdr=0x00 > vendor = 'ATI Technologies' > device = 'Radeon 9800 Pro - Secondary' > class = display > fwohci0_at_pci2:2:0: class=0x0c0010 card=0x1022147b chip=0x8024104c > rev=0x00 hdr=0x00 > vendor = 'Texas Instruments (TI)' > device = 'TSB43AB23 1394a-2000 OHCI PHY/link-layer Controller' > class = serial bus > subclass = FireWire > fxp0_at_pci2:4:0: class=0x020000 card=0x00098086 chip=0x12298086 rev=0x05 > hdr=0x00 > vendor = 'Intel Corporation' > device = '82550/1/7/8/9 EtherExpress PRO/100(B) Ethernet Adapter' > class = network > subclass = ethernet > none2_at_pci2:6:0: class=0x040100 card=0x00511102 chip=0x00041102 rev=0x03 > hdr=0x00 > vendor = 'Creative Labs' > device = 'EMU10K2 Audio Chipset (SB Audigy Series)' > class = multimedia > subclass = audio > emujoy0_at_pci2:6:1: class=0x098000 card=0x00401102 chip=0x70031102 > rev=0x03 hdr=0x00 > vendor = 'Creative Labs' > device = 'EMU10K2 Audigy Gameport' > class = input device > fwohci1_at_pci2:6:2: class=0x0c0010 card=0x00101102 chip=0x40011102 > rev=0x00 hdr=0x00 > vendor = 'Creative Labs' > device = 'EMU10K2 Audigy IEEE1394 Firewire Controller' > class = serial bus > subclass = FireWire > ahc0_at_pci2:7:0: class=0x010000 card=0x78819004 chip=0x81789004 rev=0x01 > hdr=0x00 > vendor = 'Adaptec Inc' > device = 'AHA-2940U/UW/2940D Ultra/Ultra Wide/Dual SCSI Host > Adapter' > class = mass storage > subclass = SCSI > bktr0_at_pci2:9:0: class=0x040000 card=0x1200bd11 chip=0x036e109e rev=0x11 > hdr=0x00 > vendor = 'Brooktree Corporation' > device = 'Bt878 MediaStream Controller' > class = multimedia > subclass = video > none3_at_pci2:9:1: class=0x048000 card=0x1200bd11 chip=0x0878109e rev=0x11 > hdr=0x00 > vendor = 'Brooktree Corporation' > device = 'Bt878/Fusion878A Video Capture (Audio Section)' > class = multimedia > > > Jamie Bowden > > -- > "It was half way to Rivendell when the drugs began to take hold" > Hunter S Tolkien "Fear and Loathing in Barad Dur" > Iain Bowen <alaric_at_alaric.org.uk> > > > _______________________________________________ > freebsd-current_at_freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org" >Received on Tue Jan 06 2004 - 18:51:09 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:36 UTC