kernel built with cvsupped sources of 2004.06.10 10 14:48 gmt. # ifconfig -a fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=8<VLAN_MTU> inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255 ether 00:03:47:fa:d9:e7 media: Ethernet autoselect (100baseTX <full-duplex>) status: active lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet 127.0.0.1 netmask 0xff000000 # netstat -rn Routing tables Internet: Destination Gateway Flags Refs Use Netif Expire default 192.168.0.1 UGS 0 246 fxp0 127.0.0.1 127.0.0.1 UH 0 224 lo0 192.168.0 link#1 UC 0 0 fxp0 192.168.0.1 link#1 UHLW 1 2 fxp0 192.168.0.2 00:03:47:fa:d9:e7 UHLW 0 2 lo0 192.168.0.4 link#1 UHLW 0 1 fxp0 192.168.0.255 ff:ff:ff:ff:ff:ff UHLWb 0 15 fxp0 # ping 192.168.0.2 PING 192.168.0.2 (192.168.0.2): 56 data bytes ping: sendto: Permission denied ping: sendto: Permission denied ^C --- 192.168.0.2 ping statistics --- 2 packets transmitted, 0 packets received, 100% packet loss # ping 127.0.0.1 PING 127.0.0.1 (127.0.0.1): 56 data bytes ping: sendto: Permission denied ping: sendto: Permission denied ping: sendto: Permission denied ping: sendto: Permission denied ^C --- 127.0.0.1 ping statistics --- 4 packets transmitted, 0 packets received, 100% packet loss randy --- Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT #22: Thu Jun 10 16:57:48 PDT 2004 root_at_frob.com:/usr/obj/usr/src/sys/FROB Preloaded elf kernel "/boot/kernel/kernel" at 0xc07c1000. Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc07c1294. Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc07c1340. Preloaded elf module "/boot/kernel/bktr.ko" at 0xc07c13ec. Preloaded elf module "/boot/kernel/bktr_mem.ko" at 0xc07c1498. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc07c1548. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 1.70GHz (1694.86-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf12 Stepping = 2 Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM> real memory = 536608768 (511 MB) avail memory = 519606272 (495 MB) bktr_mem: memory holder loaded random: <entropy source, Software, Yarrow> Pentium Pro MTRR support enabled npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <D850MV MV85010A> on motherboard acpi0: [GIANT-LOCKED] pcibios: BIOS version 2.10 acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0.MDET] (Node 0xc1576ee0), AE_AML_REGION_LIMIT ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0._CRS] (Node 0xc161d080), AE_AML_REGION_LIMIT ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0._CRS] (Node 0xc161d080), AE_AML_REGION_LIMIT can't fetch resources for \\_SB_.PCI0 - AE_AML_REGION_LIMIT ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0.MDET] (Node 0xc1576ee0), AE_AML_REGION_LIMIT ACPI-1303: *** Error: Method execution failed [\\_SB_.MEM_._CRS] (Node 0xc161df00), AE_AML_REGION_LIMIT ACPI-0239: *** Error: Method execution failed [\\_SB_.MEM_._CRS] (Node 0xc161df00), AE_AML_REGION_LIMIT can't fetch resources for \\_SB_.MEM_ - AE_AML_REGION_LIMIT acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib0: slot 31 INTD is routed to irq 5 pcib0: slot 31 INTB is routed to irq 10 pcib0: slot 31 INTB is routed to irq 10 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pcib0: slot 1 INTA is routed to irq 11 pcib1: slot 0 INTA is routed to irq 11 pci1: <display, VGA> at device 0.0 (no driver attached) pci1: <display> at device 0.1 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib2: slot 1 INTA is routed to irq 5 pcib2: slot 1 INTB is routed to irq 7 pcib2: slot 1 INTC is routed to irq 9 pcib2: slot 8 INTA is routed to irq 11 pcib2: slot 11 INTA is routed to irq 9 pcib2: slot 12 INTA is routed to irq 10 pcib2: slot 12 INTA is routed to irq 10 ohci0: <NEC uPD 9210 USB controller> mem 0xff9fc000-0xff9fcfff irq 5 at device 1.0 on pci2 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0 usb0: SMM does not respond, resetting usb0: <NEC uPD 9210 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ohci1: <NEC uPD 9210 USB controller> mem 0xff9fd000-0xff9fdfff irq 7 at device 1.1 on pci2 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0 usb1: SMM does not respond, resetting usb1: <NEC uPD 9210 USB controller> on ohci1 usb1: USB revision 1.0 uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered pci2: <serial bus, USB> at device 1.2 (no driver attached) fxp0: <Intel 82801BA/CAM (ICH2/3) Pro/100 Ethernet> port 0xdf00-0xdf3f mem 0xff9fb000-0xff9fbfff irq 11 at device 8.0 on pci2 miibus0: <MII bus> on fxp0 inphy0: <i82562ET 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:03:47:fa:d9:e7 fxp0: [GIANT-LOCKED] ahc0: <Adaptec 19160B Ultra160 SCSI adapter> port 0xd800-0xd8ff mem 0xff9ff000-0xff9fffff irq 9 at device 11.0 on pci2 ahc0: [GIANT-LOCKED] aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs bktr0: <BrookTree 878> mem 0xf6afe000-0xf6afefff irq 10 at device 12.0 on pci2 bktr0: [GIANT-LOCKED] bktr0: Hauppauge Model 61111 A M bktr0: Detected a MSP3430G-A1 at 0x80 bktr0: Hauppauge WinCast/TV, Philips NTSC tuner, msp3400c stereo. pci2: <multimedia> at device 12.1 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH2 UDMA100 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xef80-0xef9f irq 5 at device 31.2 on pci0 uhci0: [GIANT-LOCKED] usb2: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pcm0: <Intel ICH2 (82801BA)> port 0xef00-0xef3f,0xe800-0xe8ff irq 10 at device 31.5 on pci0 pcm0: [GIANT-LOCKED] pcm0: <Analog Devices AD1885 AC97 Codec> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f4-0x3f5,0x3f2-0x3f3,0x3f0-0x3f1 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A orm0: <Option ROM> at iomem 0xc0000-0xccfff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: parallel port not found. Timecounter "TSC" frequency 1694856040 Hz quality 800 Timecounters tick every 10.000 msec ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to deny, logging unlimited ata0-slave: DMA limited to UDMA33, non-ATA66 cable or device acd0: CDRW <SONY CD-RW CRX185E1> at ata0-master UDMA33 ad0: 117800MB <IC35L120AVVA07-0> [239340/16/63] at ata0-slave UDMA33 Waiting 5 seconds for SCSI devices to settle pcm0: measured ac97 link rate at 55918 Hz da0 at ahc0 bus 0 target 0 lun 0 da0: <IBM IC35L036UWPR15-0 S80C> Fixed Direct Access SCSI-3 device da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled da0: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C) cd0 at ata0 bus 0 target 0 lun 0 cd0: <SONY CD-RW CRX185E1 XYS2> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: cd present [176605 x 2048 byte records] (cd0:ata0:0:0:0): READ(10). CDB: 28 0 0 0 0 0 0 0 2 0 (cd0:ata0:0:0:0): CAM Status: SCSI Status Error (cd0:ata0:0:0:0): SCSI Status: Check Condition (cd0:ata0:0:0:0): ILLEGAL REQUEST asc:64,0 (cd0:ata0:0:0:0): Illegal mode for this track (cd0:ata0:0:0:0): Unretryable error (cd0:ata0:0:0:0): cddone: got error 0x6 back (cd0:ata0:0:0:0): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0 (cd0:ata0:0:0:0): CAM Status: SCSI Status Error (cd0:ata0:0:0:0): SCSI Status: Check Condition (cd0:ata0:0:0:0): ILLEGAL REQUEST asc:64,0 (cd0:ata0:0:0:0): Illegal mode for this track (cd0:ata0:0:0:0): Unretryable error (cd0:ata0:0:0:0): cddone: got error 0x6 back (cd0:ata0:0:0:0): READ(10). CDB: 28 0 0 0 0 1 0 0 1 0 (cd0:ata0:0:0:0): CAM Status: SCSI Status Error (cd0:ata0:0:0:0): SCSI Status: Check Condition (cd0:ata0:0:0:0): ILLEGAL REQUEST asc:64,0 (cd0:ata0:0:0:0): Illegal mode for this track (cd0:ata0:0:0:0): Unretryable error (cd0:ata0:0:0:0): cddone: got error 0x6 back (cd0:ata0:0:0:0): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0 (cd0:ata0:0:0:0): CAM Status: SCSI Status Error (cd0:ata0:0:0:0): SCSI Status: Check Condition (cd0:ata0:0:0:0): ILLEGAL REQUEST asc:64,0 (cd0:ata0:0:0:0): Illegal mode for this track (cd0:ata0:0:0:0): Unretryable error (cd0:ata0:0:0:0): cddone: got error 0x6 back Mounting root from ufs:/dev/da0s1aReceived on Fri Jun 11 2004 - 13:30:45 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:56 UTC